Posts: 14
Threads: 4
Joined: Jun 2009
Reputation:
0
Read IDCODE: 0x0334917f
Manufacturer: Broadcom
Part: BCM3349
Version: 0x0
---------------------------------
Create & Clear RAM Buffer (0x80000000 - 0x80800000)
Load Configuration File: bcm3349.def
IR Length: 0x5
Endian: Big
Protocol: EJTAG
RAM Start Address: 0x80000000
RAM Size: 0x800000
FLASH Start Address: 0x9fc00000
---------------------------------
Read IMPCODE: 0x00800904
EJTAG Version: 1 or 2.0
EJTAG DMA Support: Yes
---------------------------------
Detect FLASH : Unknown (Manufacturer’s: 0xffff Device: 0xffff)
any solution....i try re flash but no use..
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation:
158
check all connections with a multimeter
run debrick scripts
__________________________________________________________________________________
******new discord chat link
https://discord.gg/5BQQbsb*******
Posts: 14
Threads: 4
Joined: Jun 2009
Reputation:
0
can you tell me debrick scripts
Posts: 14
Threads: 4
Joined: Jun 2009
Reputation:
0
succeed in unbricking sb5101 but when i flash again using JtagUtility haxorware11rev38-LITE detect ldram 9fc10000 etc.....after flashing all light goes off and nothing happens....pls help..
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation:
158
turn verify on and see at what percent it errors
__________________________________________________________________________________
******new discord chat link
https://discord.gg/5BQQbsb*******
Posts: 14
Threads: 4
Joined: Jun 2009
Reputation:
0
FLASH : Intel 28F160C3B
- Error Write Sector: 0x9fc20000 !!! Trying Again...
- Error Write Sector: 0x9fc40000 !!! Trying Again...
- Error Write Sector: 0x9fc50000 !!! Trying Again...
- Error Write Sector: 0x9fc60000 !!! Trying Again...
- Error Write Sector: 0x9fc60000 !!! Trying Again...
- Error Write Sector: 0x9fc70000 !!! Trying Again...
- Error Write Sector: 0x9fc80000 !!! Trying Again...
- Error Write Sector: 0x9fc90000 !!! Trying Again...
- Error Write Sector: 0x9fc90000 !!! Trying Again...
- Error Write Sector: 0x9fca0000 !!! Trying Again...
- Error Write Sector: 0x9fcb0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcd0000 !!! Trying Again...
- Error Write Sector: 0x9fcd0000 !!! Trying Again...
- Error Write Sector: 0x9fce0000 !!! Trying Again...
- Error Write Sector: 0x9fd30000 !!! Trying Again...
- Error Write Sector: 0x9fd30000 !!! Trying Again...
- Error Write Sector: 0x9fd30000 !!! Trying Again...
Program: Complete
Haxorware1.1r39lite installed and now i can open 19.168.100.1
Thanx drewmerc
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation:
158
it should, all the error's are a different memory locations, 4 at 0x9fcc0000 was the worst but it' would be fine
__________________________________________________________________________________
******new discord chat link
https://discord.gg/5BQQbsb*******
