Help:SB5101 Detect FLASH : Unknown - Printable Version +- Haxorware Forums (http://www.haxorware.com/forums) +-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6) +--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7) +--- Thread: Help:SB5101 Detect FLASH : Unknown (/showthread.php?tid=478) Pages:
1
2
|
Help:SB5101 Detect FLASH : Unknown - superkid139 - 16-04-2010 Read IDCODE: 0x0334917f Manufacturer: Broadcom Part: BCM3349 Version: 0x0 --------------------------------- Create & Clear RAM Buffer (0x80000000 - 0x80800000) Load Configuration File: bcm3349.def IR Length: 0x5 Endian: Big Protocol: EJTAG RAM Start Address: 0x80000000 RAM Size: 0x800000 FLASH Start Address: 0x9fc00000 --------------------------------- Read IMPCODE: 0x00800904 EJTAG Version: 1 or 2.0 EJTAG DMA Support: Yes --------------------------------- Detect FLASH : Unknown (Manufacturer’s: 0xffff Device: 0xffff) any solution....i try re flash but no use.. RE: Help:SB5101 Detect FLASH : Unknown - drewmerc - 16-04-2010 check all connections with a multimeter run debrick scripts RE: Help:SB5101 Detect FLASH : Unknown - superkid139 - 16-04-2010 can you tell me debrick scripts RE: Help:SB5101 Detect FLASH : Unknown - drewmerc - 16-04-2010 http://lmgtfy.com/?q=sb5101+debrick+scripts RE: Help:SB5101 Detect FLASH : Unknown - superkid139 - 16-04-2010 Nice.... RE: Help:SB5101 Detect FLASH : Unknown - superkid139 - 17-04-2010 succeed in unbricking sb5101 but when i flash again using JtagUtility haxorware11rev38-LITE detect ldram 9fc10000 etc.....after flashing all light goes off and nothing happens....pls help.. RE: Help:SB5101 Detect FLASH : Unknown - drewmerc - 17-04-2010 turn verify on and see at what percent it errors RE: Help:SB5101 Detect FLASH : Unknown - superkid139 - 18-04-2010 FLASH : Intel 28F160C3B - Error Write Sector: 0x9fc20000 !!! Trying Again... - Error Write Sector: 0x9fc40000 !!! Trying Again... - Error Write Sector: 0x9fc50000 !!! Trying Again... - Error Write Sector: 0x9fc60000 !!! Trying Again... - Error Write Sector: 0x9fc60000 !!! Trying Again... - Error Write Sector: 0x9fc70000 !!! Trying Again... - Error Write Sector: 0x9fc80000 !!! Trying Again... - Error Write Sector: 0x9fc90000 !!! Trying Again... - Error Write Sector: 0x9fc90000 !!! Trying Again... - Error Write Sector: 0x9fca0000 !!! Trying Again... - Error Write Sector: 0x9fcb0000 !!! Trying Again... - Error Write Sector: 0x9fcc0000 !!! Trying Again... - Error Write Sector: 0x9fcc0000 !!! Trying Again... - Error Write Sector: 0x9fcc0000 !!! Trying Again... - Error Write Sector: 0x9fcc0000 !!! Trying Again... - Error Write Sector: 0x9fcd0000 !!! Trying Again... - Error Write Sector: 0x9fcd0000 !!! Trying Again... - Error Write Sector: 0x9fce0000 !!! Trying Again... - Error Write Sector: 0x9fd30000 !!! Trying Again... - Error Write Sector: 0x9fd30000 !!! Trying Again... - Error Write Sector: 0x9fd30000 !!! Trying Again... Program: Complete Haxorware1.1r39lite installed and now i can open 19.168.100.1 Thanx drewmerc RE: Help:SB5101 Detect FLASH : Unknown - chris305 - 24-09-2011 (18-04-2010, 10:48 AM)superkid139 Wrote: FLASH : Intel 28F160C3B It worked for you with all of those errors? RE: Help:SB5101 Detect FLASH : Unknown - drewmerc - 24-09-2011 it should, all the error's are a different memory locations, 4 at 0x9fcc0000 was the worst but it' would be fine |