Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sb5101 with Haxor random rebooting.
#1
Hello, I have a 5101 with haxorware, he gets to be operational and navigating, but is randomly restarting, sometimes it gets 5min online and reboot, others go online for hours.

I searched the forum and found various answers to similar problems and tried all the solutions and nothing helped me. I also saw that post the log of haxor interface dont help and learned to do the telnet log.


Log1 - The log from giving "run" on the modem to the extent that it is operating
Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.04.28 22:25:03 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon

Username: o root
Password: *****
Welcome.

CM>
CM> run
CM>  
CM> run_app


Running the system...


Beginning Cable Modem operation...

0x00019a28 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:  (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Favorite[0].freq = 507000000
Attempting Downstream FEC lock @ freq= 507000000 Hz, QAM64/256

CM> Found energy at frequency 507000000Hz!  Publishing event kEventEnergyDetected...
0x00019c80 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit:  (CmDocsisCtlThread) Locked on the downstream.  Waiting for UCDs...

******************************************
            DOWNSTREAM STATUS
******************************************
  Tuner Frequency = 507000000 Hz
   Carrier Offset = 8 Hz
      Symbol rate = 5360537 sym/sec
              SNR = 36 dB
         QAM Mode =
        Tuner AGC =
           IF AGC =
      Power Level = -2 dB
              QAM = LOCKED
              FEC = LOCKED
******************************************


CM> Calculating maximum number of IP filters:
  Each IP filter consumes 8112 bytes of RAM.
  Current free RAM is 482036 bytes.
  Max heap reserved for IP filters (25%) = 120509
  We can support 16 IP filters.
Calculating maximum number of LLC filters:
  Each LLC filter consumes 720 bytes of RAM.
  Current free RAM is 475760 bytes.
  Max heap reserved for LLC filters (25%) = 118940
  We can support 165 LLC filters.
0x00019e4c [CmDocsisCtlThread] BcmCmDocsisCtlThread::RxMsgEvent:  (CmDocsisCtlThread) WARNING - iteration limit reached.  giving up control...

CM> Selecting UCD for Us Channel 2

0x0001a5fe [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync:  (CmDocsisCtlThread) starting ds time sync acquisition...
0x0001a888 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RxMsgEvent:  (CmDocsisCtlThread) WARNING - iteration limit reached.  giving up control...
0x0001a8a6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk:  (CmDocsisCtlThread) downstream time sync acquired...
0x0001a8a6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit:  (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 46.0 dBmV
0x0001a8a6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk:  (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control  for level 7 is 0.

RNG-RSP  Adj: tim=2508 power=0 freq=0  Stat=Continue

CM>
RNG-RSP  Adj: tim=0 power=0 freq=0  Stat=Continue

CM>
RNG-RSP  Adj: tim=0 power=0 freq=0  Stat=Continue

CM>
RNG-RSP  Adj: tim=0 power=0 freq=0  Stat=Continue

CM>
RNG-RSP  Adj: tim=0 power=0 freq=0  Stat=Success

******************************************
            UPSTREAM STATUS
******************************************
       Upstream Status = UP
      Upstream Channel = 2
    Upstream Frequency = 36200000 Hz
        Upstream Power = 47 dBmV
           Ranging SID = 0x7d0
  Upstream Symbol Rate = 2560000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc:  Waiting 1 seconds before sending Discover; client id htype=1, value=
Not logging event ID 2307948624, control  for level 7 is 0.

CM> DHCPc:  Sending Discover packet; client id htype=1, value=
DHCPc:  Received an Offer from DHCP server  (); lease client id htype=1, value=

CM> DHCPc:  Timed out waiting for offers for lease with client id htype=1, value=
DHCPc:  Sending Request packet; client id htype=1, value=
DHCPc:  Received an Ack from DHCP server  (); lease client id htype=1, value=
Current IP address is default 0.0.0.0.
0x0001c53e [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl:  (IP Stack1 HalIf)
Configuring IP stack 1:
  IP Address =  (primary IP address)
   Subnet Mask =
   Router =
   IsPrimaryInterface = 1

Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP =
MAC =
DHCP completed successfully!

DHCP Settings:
                     Client Id = htype=1, value=
                         State = Renewing (5)
                  Static Lease = 0
               AutoConfig Mode = IP, Subnet and Router
                           XID =
               Number of Tries = 0
            Max Discover Tries = 6
             Max Request Tries = 6
          DHCP server MAC addr =
                   Ignore NAKs = 0
         My offered IP address =  (primary IP address)
               (1) Subnet Mask =
         (3) Router IP address =
   (54) DHCP Server IP address =
   (82) Relay Agent IP address =
        TFTP Server IP address =
         CM Configuration file = ''
           (2) UTC Time Offset = -10800 seconds
    (4) Time Server IP address = ;
        (6) Domain Name Server =
     (7) Log Server IP address =
               (51) Lease time = 604800 seconds
               (58) T1 (renew) = 302400 seconds
              (59) T2 (rebind) = 529200 seconds
             Lease is infinite = 0

   (122) PacketCable/CableHome -== SubOptions ==-
              SubOpt(1) Primary Dhcp Server =
            SubOpt(2) Secondary Dhcp Server =


SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=, Subnet=, Gateway=
  CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
    IP addr =
Starting Time Of Day...
0x0001c5e8 [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress:  (Time Of Day Thread) ToD servers:  ;
Connecting to ToD server ...
Sending UDP ToD request to server...
SNMP Agent Binding to :225
Not logging event ID 2291949724, control  for level 7 is 0.
UTC returned by ToD server 3607723540; UTC offset -10800
Current system time -> Mon Apr 28 22:25:40 2014

System start time -> Mon Apr 28 22:23:44 2014

Starting Tftp of configuration file...
Opening file '' on  for reading...
tftp-enforce bypass is DISABLED
Storing received cfg of size 2956 to memory
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
            Stack Interface = 1
          Server Ip Address =
         Server Port Number = 69
          Total Blocks Read = 6
           Total Bytes Read = 2956

Config file was read!  IP Initialization completed...
Motorola vendor ID
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.1 ->
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.1 ->
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.1 -> public
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.1 -> 3 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.7.1 -> 4 (i32)
TLV-11[6]: 1.3.6.1.2.1.69.1.6.4.1.2.1 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.6.4.1.3.1 -> 1 (i32)
TLV-11[8]: 1.3.6.1.2.1.69.1.6.4.1.5.1 -> 3 (i32)
TLV-11[9]: 1.3.6.1.2.1.69.1.6.4.1.6.1 -> 2 (i32)
TLV-11[10]: 1.3.6.1.2.1.69.1.6.4.1.11.1 -> 17 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.6.4.1.12.1 -> 135 (i32)
TLV-11[12]: 1.3.6.1.2.1.69.1.6.4.1.13.1 -> 139 (i32)
TLV-11[13]: 1.3.6.1.2.1.69.1.6.4.1.14.1 -> 0 (i32)
TLV-11[14]: 1.3.6.1.2.1.69.1.6.4.1.15.1 -> 65535 (i32)
TLV-11[15]: 1.3.6.1.2.1.69.1.6.4.1.2.2 -> 4 (i32)
TLV-11[16]: 1.3.6.1.2.1.69.1.6.4.1.3.2 -> 1 (i32)
TLV-11[17]: 1.3.6.1.2.1.69.1.6.4.1.5.2 -> 3 (i32)
TLV-11[18]: 1.3.6.1.2.1.69.1.6.4.1.6.2 -> 2 (i32)
TLV-11[19]: 1.3.6.1.2.1.69.1.6.4.1.11.2 -> 17 (i32)
TLV-11[20]: 1.3.6.1.2.1.69.1.6.4.1.12.2 -> 445 (i32)
TLV-11[21]: 1.3.6.1.2.1.69.1.6.4.1.13.2 -> 445 (i32)
TLV-11[22]: 1.3.6.1.2.1.69.1.6.4.1.14.2 -> 0 (i32)
TLV-11[23]: 1.3.6.1.2.1.69.1.6.4.1.15.2 -> 65535 (i32)
TLV-11[24]: 1.3.6.1.2.1.69.1.6.4.1.2.3 -> 4 (i32)
TLV-11[25]: 1.3.6.1.2.1.69.1.6.4.1.3.3 -> 1 (i32)
TLV-11[26]: 1.3.6.1.2.1.69.1.6.4.1.5.3 -> 1 (i32)
TLV-11[27]: 1.3.6.1.2.1.69.1.6.4.1.6.3 -> 2 (i32)
TLV-11[28]: 1.3.6.1.2.1.69.1.6.4.1.11.3 -> 6 (i32)
TLV-11[29]: 1.3.6.1.2.1.69.1.6.4.1.12.3 -> 80 (i32)
TLV-11[30]: 1.3.6.1.2.1.69.1.6.4.1.13.3 -> 80 (i32)
TLV-11[31]: 1.3.6.1.2.1.69.1.6.4.1.14.3 -> 0 (i32)
TLV-11[32]: 1.3.6.1.2.1.69.1.6.4.1.15.3 -> 65535 (i32)
TLV-11[33]: 1.3.6.1.2.1.69.1.6.4.1.2.4 -> 4 (i32)
TLV-11[34]: 1.3.6.1.2.1.69.1.6.4.1.3.4 -> 1 (i32)
TLV-11[35]: 1.3.6.1.2.1.69.1.6.4.1.5.4 -> 1 (i32)
TLV-11[36]: 1.3.6.1.2.1.69.1.6.4.1.6.4 -> 2 (i32)
TLV-11[37]: 1.3.6.1.2.1.69.1.6.4.1.11.4 -> 17 (i32)
TLV-11[38]: 1.3.6.1.2.1.69.1.6.4.1.12.4 -> 53 (i32)
TLV-11[39]: 1.3.6.1.2.1.69.1.6.4.1.13.4 -> 53 (i32)
TLV-11[40]: 1.3.6.1.2.1.69.1.6.4.1.14.4 -> 0 (i32)
TLV-11[41]: 1.3.6.1.2.1.69.1.6.4.1.15.4 -> 65535 (i32)
TLV-11[42]: 1.3.6.1.2.1.69.1.6.4.1.2.5 -> 4 (i32)
TLV-11[43]: 1.3.6.1.2.1.69.1.6.4.1.3.5 -> 1 (i32)
TLV-11[44]: 1.3.6.1.2.1.69.1.6.4.1.5.5 -> 1 (i32)
TLV-11[45]: 1.3.6.1.2.1.69.1.6.4.1.6.5 -> 2 (i32)
TLV-11[46]: 1.3.6.1.2.1.69.1.6.4.1.11.5 -> 6 (i32)
TLV-11[47]: 1.3.6.1.2.1.69.1.6.4.1.12.5 -> 21 (i32)
TLV-11[48]: 1.3.6.1.2.1.69.1.6.4.1.13.5 -> 21 (i32)
TLV-11[49]: 1.3.6.1.2.1.69.1.6.4.1.14.5 -> 0 (i32)
TLV-11[50]: 1.3.6.1.2.1.69.1.6.4.1.15.5 -> 65535 (i32)
TLV-11[51]: 1.3.6.1.2.1.69.1.6.4.1.2.6 -> 4 (i32)
TLV-11[52]: 1.3.6.1.2.1.69.1.6.4.1.3.6 -> 1 (i32)
TLV-11[53]: 1.3.6.1.2.1.69.1.6.4.1.5.6 -> 3 (i32)
TLV-11[54]: 1.3.6.1.2.1.69.1.6.4.1.6.6 -> 2 (i32)
TLV-11[55]: 1.3.6.1.2.1.69.1.6.4.1.11.6 -> 6 (i32)
TLV-11[56]: 1.3.6.1.2.1.69.1.6.4.1.12.6 -> 25 (i32)
TLV-11[57]: 1.3.6.1.2.1.69.1.6.4.1.13.6 -> 25 (i32)
TLV-11[58]: 1.3.6.1.2.1.69.1.6.4.1.14.6 -> 0 (i32)
TLV-11[59]: 1.3.6.1.2.1.69.1.6.4.1.15.6 -> 65535 (i32)
TLV-11[60]: 1.3.6.1.4.1.4115.1.3.1.1.2.3.2.0 -> 4 (i32) UNKNOWN, ignoring.
TLV-11[61]: 1.3.6.1.4.1.4115.10.1.20.0 -> 1066551 (i32) UNKNOWN, ignoring.
TLV-11[62]: 1.3.6.1.4.1.1166.1.19.3.1.27.0 -> 2 (i32)
TLV-11[63]: 1.3.6.1.2.1.69.1.3.3.0 -> 2 (i32)
TLV-11[64]: 1.3.6.1.2.1.69.1.2.1.6.1 -> HEX:40 00
TLV-11[65]: 1.3.6.1.2.1.69.1.2.1.2.2 ->
TLV-11[66]: 1.3.6.1.2.1.69.1.2.1.3.2 ->
TLV-11[67]: 1.3.6.1.2.1.69.1.2.1.4.2 -> public
TLV-11[68]: 1.3.6.1.2.1.69.1.2.1.5.2 -> 3 (i32)
TLV-11[69]: 1.3.6.1.2.1.69.1.2.1.6.2 -> HEX:40 00
TLV-11[70]: 1.3.6.1.2.1.69.1.2.1.7.2 -> 4 (i32)
TLV-11[71]: 1.3.6.1.4.1.4115.10.1.24.0 -> 2 (i32) UNKNOWN, ignoring.
Time Of Day completed...
  DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control  for level 7 is 0.
Not logging event ID 2291949324, control  for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to :225
  71 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x0001ce80 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent:  (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
Registration complete!
Process CVC
Non-Vol BPI Settings successfully written to the device.
Manufacturer CVC verified
At least one CVC is valid.
DOCSIS CoS/QoS rate shaping enable is now 1
  CmSnmpAgent::CmOperationalEvent for SB5102 CM Agent w/ BRCM Factory Support
CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
    We will operate in NMACCESS mode.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
SB5102 CM Agent w/ BRCM Factory Support enabling management.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
0x0001cf02 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchBpkm:  (CmDocsisCtlThread) BPKM enabled. starting BPKM key requests.
Logging event: TLV-11 - unrecognized OID
Sending syslog message from IF 1 to :
  <133> CABLEMODEM [DOCSIS]: <73040100> TLV-11 - unrecognized OID
Logging event: TLV-11 - unrecognized OID
Sending syslog message from IF 1 to :
  <133> CABLEMODEM [DOCSIS]: <73040100> TLV-11 - unrecognized OID
Logging event: TLV-11 - unrecognized OID
Sending syslog message from IF 1 to :
  <133> CABLEMODEM [DOCSIS]: <73040100> TLV-11 - unrecognized OID
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
Not logging event ID 66040100, control  for level 7 is 0.
BPI initialization completed.  Calling ConfigOperational().
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
Suspending SNMP Thread
0x0001d3c6 [CmDocsisCtlThread] BcmVendorCmApplication::StopDhcpServer:  (VendorExtension CmApp) Shutting down DHCP Server...
0x0001d3c6 [CmDocsisCtlThread] BcmStandbySwitchThread::CmIsOperational:  (Motorola Standby Switch Thread) Simulating a press of the standby switch to get the state configured properly.
0x0001d3d0 [IGMP Thread] BcmIgmpThread::Starting Igmp Thread...:  (IGMP Thread)
0x0001d3d0 [Motorola Standby Switch Thread] BcmStandbySwitchThread::ThreadMain:  (Motorola Standby Switch Thread) Standby switch was pressed!
0x0001d3d0 [Motorola Standby Switch Thread] BcmStandbySwitchThread::ProcessSwitchEvent:  (Motorola Standby Switch Thread) Standby switch disabled in nonvol; ignoring event.
Not logging event ID 2296948624, control  for level 7 is 0.

CM> su  auto_console 0
CM> auto_console 0

Error - Unknown command:  'auto_console 0'

CM> cr  cd
CM>  
CM> cd doc
CM> cd doc

Active Command Table:  CM DOCSIS Control Thread Commands (docsis_ctl)

CM -> docsis_ctl

CM/DocsisCtl> up_dis
CM/DocsisCtl>  
CM/DocsisCtl> up_dis

Simulating UP-DIS message.

Received an UP-DIS message from the CMTS!

Mode = disable transmitter
BcmCmDocsisStatusEventCodes::kCmIsNotOperational
0x00033bb2 [CmDocsisCtlThread] BcmVendorCmApplication::StartDhcpServer:  (VendorExtension CmApp) Starting DHCP Server!
0x00033bb2 [IGMP Thread] BcmIgmpThread::Stopping Igmp Thread...:  (IGMP Thread)
CamDeleteAddress: Deleted address from cam segment 0
Not logging event ID 2436694041, control  for level 7 is 0.
0x00033bda [CmBpiManagerThd] BcmDocsisCmHalIf::SelectActiveBpiKey:  (DOCSIS CableModem HalIf) WARNING - BPI is now disabled!

CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0x7d0
0x00033c7a [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:  (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc:  Releasing the lease with client id htype=1, value=
DHCPc:  Sending Release packet; client id htype=1, value=
0x00033c84 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket:  (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x00033c84 [DHCP Client Thread] BcmDhcpClientIf::SendRelease:  (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet!  Oh, well, no biggie...
0x00033c84 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 HalIf) Removing lease IP address  from IP stack 1
0x00033c8e [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x00033c8e [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl:  (IP Stack1 HalIf)
Shutting down IP stack 1

CM/DocsisCtl>   DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x00033d92 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:  (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x00033d92 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:  (Scan Downstream Thread) Downstream Channel scan stopped!
0x00033da6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncStop:  (CmDocsisCtlThread)

*
* Locking off-frequency so that we don't receive any
* messages or data.  Ignore the scan messages that follow...
*

Timeout is forever; stopping timer.
0x00033dba [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:  (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 7000000
Scanning DS Channel at 7000000 Hz... (Initial target freq)

CM/DocsisCtl> Found energy at frequency 7000000Hz!  Publishing event kEventEnergyDetected...
cd
CM/DocsisCtl>  
CM/DocsisCtl> cd /
CM/DocsisCtl> cd /

Active Command Table:  CM DOCSIS Commands (CM)

CM

CM> cd
CM>  
CM> cd n/b
CM> cd n/b

Active Command Table:  BFC Application Settings Commands (bfcApp)

CM -> non-vol -> bfcApp

CM/NonVol/BfcApp> auto_console
CM/NonVol/BfcApp>  
CM/NonVol/BfcApp> auto_console 0
CM/NonVol/BfcApp> auto_console 0

Automatically stop at console = 0

CM/NonVol/BfcApp> write
CM/NonVol/BfcApp>  
CM/NonVol/BfcApp> write

Dynamic Non-Vol Settings successfully written to the device.
Permanent Non-Vol Settings successfully written to the device.

CM/NonVol/BfcApp>


Log2 - The log from "operational" to the random reboot.

Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.04.29 09:56:13 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon

Username: root
Password: *****
Welcome.

CM>
CM> Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
Bandwidth request failure!  Status = 0
0x00141a36 [CmDocsisCtlThread] BcmCmDocsisCtlThread::T4NoStationMaintEvent:  (CmDocsisCtlThread) ERROR - no Station Maint map op -> restart error

*
* We are currently at Freq 507000000 Hz...
* Current US Channel ID 2
* TargetDsFreq  507000000 Hz...
* TargetUsChan  2
* TargetContext 0
*

0x00141a36 [CmDocsisCtlThread] BcmCmDocsisCtlThread::T4NoStationMaintEvent:  (CmDocsisCtlThread) MOTOROLA-SPECIFIC -> REBOOTING IN CASE OF T4
  DefaultSnmpAgentClass::ShutdownPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support disabling management.
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support disabling management.
SB5102 CPE Agent w/ BRCM Factory Support defering traps.
CmSnmpAgent waiting for packets, events, and traps to clear...
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 timeout
Logging event: Modem Is Shutting Down and Rebooting...
Sending syslog message from IF 1 to :
  <133> CABLEMODEM [Motorola Corporation]: <2300955924> Modem Is Shutting Down and Rebooting...
Bandwidth request failure!  Status = 0

CM> Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc:  Releasing the lease with client id htype=1, value=
DHCPc:  Sending Release packet; client id htype=1, value=
0x00141c34 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 HalIf) Removing lease IP address  from IP stack 1
0x00141c34 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x00141c3e [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl:  (IP Stack1 HalIf)
Shutting down IP stack 1
Bandwidth request failure!  Status = 0

Already tried to Spoof modem, eneable the smnp, change the smnp port, eneable to ignore t4 timeout (who let me operational but not navigating). Already tried with and without an split in cable. And change the certificates too, it happens with all 4 what i tried (1 of 1MB, 2 of 10MB and 1 of 20MB).
Reply
#2
T4NoStationMaintEvent
Reply
#3
SB5102 CM Agent = your isp recognizes hax steath so it shows your model sb5101

<133> CABLEMODEM [DOCSIS]: <73040100> TLV-11 - unrecognized OID

that happen to me when I used unrecognizable firmware my isp doesn't support

also when you post a log edit your personal info out your isp is on here watching you
Reply
#4
Then, theres no way to fix it?

I dont knwo what exactly is my personal info in the post, then i remove all macs, ips and stuffs what looks important to the isp. Let me know if i did shit on it. Smile
Reply
#5
(29-04-2014, 03:47 PM)franklinzero Wrote: Then, theres no way to fix it?

I dont knwo what exactly is my personal info in the post, then i remove all macs, ips and stuffs what looks important to the isp. Let me know if i did shit on it. Smile

remove all of what you said...... do you still have original back up and firmware for your sb5101? if so restore....let your isp boot right configs through coax.....reflash hax.....have a great time surfing....your mac and certs also must be valid with each other and provisioned on your isp.... your help menu in your original firmware from isp upgrade will indicate your stealth settings for hax...

(29-04-2014, 04:38 PM)KnoxK Wrote:
(29-04-2014, 03:47 PM)franklinzero Wrote: Then, theres no way to fix it?

I dont knwo what exactly is my personal info in the post, then i remove all macs, ips and stuffs what looks important to the isp. Let me know if i did shit on it. Smile

remove all of what you said...... do you still have original back up and firmware for your sb5101? if so restore....let your isp boot right configs through coax.....reflash hax.....have a great time surfing....your mac and certs also must be valid with each other and provisioned on your isp.... your help menu in your original firmware from isp upgrade will indicate your stealth settings for hax...

also if your connecting and using a "c**ne" it cannot be on same node or you will be kick offline as two handshakes of the same mac and cert on same node is a nono
Reply
#6
Ty a lot KnoxK. Ill do like u said. I dont have the backup cause i already bought that modem premod, but i have one firm of the same chipset and that stuffs. Will it works?
Reply
#7
listen franklinzero
in my personal experience that stupid error is abaut signal problem........wait,the isp is gonna fix that shit
not only you got that issue,iff is what im thinking
Reply
#8
Check your RF plant or make a service call....signal is the problem.
Reply
#9
(29-04-2014, 04:38 PM)KnoxK Wrote: remove all of what you said...... do you still have original back up and firmware for your sb5101? if so restore....let your isp boot right configs through coax.....reflash hax.....have a great time surfing....your mac and certs also must be valid with each other and provisioned on your isp.... your help menu in your original firmware from isp upgrade will indicate your stealth settings for hax...

I did that, now modem dont even boot, and when i try to load anything with ldram or load boot i got an "Address out of range" error and next all comands lead to BUSY!

Like this:
Code:
jtag> detect
JTAG communication failure, check connection, JTAG interface, target power etc.
jtag> detect

Read IDCODE: 0x0334917f
Manufacturer: Broadcom
Part: BCM3349
Version: 0x0
---------------------------------
Create & Clear RAM Buffer (0x80000000 - 0x80800000)
Load Configuration File: bcm3349.def
IR Length: 0x5
Endian: Big
Protocol: EJTAG
RAM Start Address: 0x80000000
RAM Size: 0x800000
FLASH Start Address: 0x9fc00000
---------------------------------
Read IMPCODE: 0xfffffffe
EJTAG Version: Unknown
EJTAG DMA Support: No
---------------------------------
Detect FLASH : Unknown (Manufacturer’s: 0x334917f Device: 0x0000)
jtag> ldram 9fc00000
Address out of range
jtag> detect
BUSY!

Any tips to solve it?

Edit: I'm following some unbrick tutorial right now, trying to fix by myself, dont bother with the last question. Smile
Edit 2: Got it! Detected and flashing NOW Big Grin
Edit 3: Unbriked. \o/
Reply
#10
Looks like dragonlord7791 is right, maybe its an isp problem. I've done all flash stuff again and now i let it become operational on isp with original firmware before flashing and still getting the same errors on haxorware.

I'll wait a few days, if not stabilize I'll retire my 5101.

Thx all for the help, u guys are amazing. Smile
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)