Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cisco DPC3208 / EPC3208(G) - howto get a shell?
#1
Hi,
i am tired with the Router Obligation of my provider.
I have a Cisco EPC3208(G).
This device would be selled by my provider as a "modem" but it's a router with a configurable firewall.
I found out, that this device have 2. local Ip Adresses:
192.168.0.1
192.168.100.1

Howto get a shell on this device?
I start a portscanner, found out that on 192.168.100.1 is a snmp port open. I also get a list when i start snmpwalk - but i don't see any option to activate the shell.

Are people on this board that have the same device and some experience Wink ?

I have a second device (same model series) - some unsoldered ports are available.

http://www50.zippyshare.com/v/91447925/file.html
(Pictures of the circuit board + manual (found on google))

Quote on manual:
"SNMPv3, SNMPv2, and SNMPv1, Telnet /SSH with configurable user ID and password, internal log, and external Syslog support"

Greetz MaCXyLo
Reply
#2
Hi,
found a lil trick for a Cisco EPC3925 (similar firmware).
some Guys on this board found a way to switch his modem into bridge mode:
http://www.boards.ie/vbulletin/showthrea...2056758726

Doesn't work for me - can someone try this on his cisco device?

Kind Regards
MaCXyLo
Reply
#3
it's spi so dump the flash
__________________________________________________________________________________
******new discord chat linkĀ https://discord.gg/5BQQbsb*******
Reply
#4
(10-11-2013, 08:59 PM)drewmerc Wrote: it's spi so dump the flash

hey drewmerc,
dumped the flash last night... Smile
but now the device doesn't boot anymore.
(firmware is on spi chip, proofed)
what can i do, to revive the device?

kind regards
Reply
#5
flash new dump
Reply
#6
other question: need someone for reverse engineering my firmware image ( have not enough technical knowhow for that ).
anyone there for this project?

have several questions with regard to my firmware:
howto enable bridge mode? is it implimanted in the firmware image?
why i am not able to write settings over snmp?

Hope, someone is ready for that.
kind regards Smile
Reply
#7
(10-02-2014, 05:57 PM)MaCXyLo Wrote: other question: need someone for reverse engineering my firmware image

http://binwalk.org/
Reply
#8
hi dude,
i don't need a program, i need a human being.
Reply
#9
hi dude,

[Image: 59142d1342390365-spoonfeed.jpg]
Reply
#10
wow, this thread is so amazing.....
a one liner after the next........
searching since months to get more informations about my modem and struggle me
have original documentations and firmware images from Arris cable modems, got the next time official documents from cisco
my plan was to release that hot shit on your board.
and the only thing that i heard from you is contempt.
Why is there so many imagination from your site?
time of universal genius is past - the inet works together...
We can't control every single system, that will de facto never fuckin' happens, so stop this negative emotions.
My strength are pracitcal works like soldering, repairing things like washing machines, cars and other stuff.
i worked for 2 ISP's as an service technician and have skills with phone lines, koax (main focus) and fibre technologies.
I can told you many stuff about the guidelines, constructions, used gauges and physical errors of a koax network on the street and the houses - that was my job.
The point is, that i have expert skills, but in other areas - so stop kidding me.
experts of different areas must work together to find solutions.


my motivation:
in germany are legal purposes that allows my provider to control completly my LAN.
So i start my researches about that topic.
Is there anyone with willingness to support my researches?
if not, simply close the thread if the questions are under your high sensitive intellect level. thanks.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)