Haxorware Forums › General › Modems v
TWC Socal down, have log can anyone help to see.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
TWC Socal down, have log can anyone help to see.
mo0mo0 Offline
Junior Member
**
Posts: 15
Threads: 2
Joined: Oct 2011
Reputation: 0
#1
22-06-2012, 11:25 AM
TWC in garden grove area seem to have updated to a new security features, another clone using the same exact config in anaheim area still working fine. Im posting a telnet log can anyone check to see what am I missing to get it working again.


@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x00009312 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x00009326 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Favorite[1].freq = 699000000
Attempting Downstream FEC lock @ freq= 699000000 Hz, QAM64/256
Found energy at frequency 699000000Hz! Publishing event kEventEnergyDetected...
0x00009574 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 699000000 Hz
Carrier Offset = 5 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x17329810
Power Level = -8 dB
QAM = LOCKED
FEC = LOCKED
******************************************

CM> Selecting UCD for Us Channel 3

0x00009f1a [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x0000a1b8 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x0000a1b8 [CmDocsisCtlThread] BcmCmDocsisCtlThread:Big GrinsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using default initial upstream power = 8.0 dBmV
0x0000a1c2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)
RNG-RSP Adj: tim=1101 power=24 freq=0 Stat=Continue
RNG-RSP Adj: tim=-1 power=24 freq=0 Stat=Continue
RNG-RSP Adj: tim=1 power=4 freq=0 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 23300000 Hz
Upstream Power = 47 dBmV
Ranging SID = 0x1b98
Upstream Symbol Rate = 5120000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc: Waiting 3 seconds before sending Discover; client id htype=1, value=00:17:ee:60:6b:62
Not logging event ID 2307948624, control for level 7 is 0.
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:17:ee:60:6b:62
DHCPc: Received an Offer from DHCP server 00:01:5c:32:9d:c1 (10.35.32.1); lease client id htype=1, value=00:17:ee:60:6b:62
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:17:ee:60:6b:62
DHCPc: Sending Request packet; client id htype=1, value=00:17:ee:60:6b:62
DHCPc: Received an Ack from DHCP server 00:01:5c:32:9d:c1 (10.35.32.1); lease client id htype=1, value=00:17:ee:60:6b:62
Current IP address is default 0.0.0.0.
0x0000c6e8 [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.35.35.251 (primary IP address)
Subnet Mask = 255.255.240.0
Router = 10.35.32.1
IsPrimaryInterface = 1

Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP = 10.35.32.1
MAC = 00:01:5c:32:9d:c1
DHCP completed successfully!

DHCP Settings:
Client Id = htype=1, value=00:17:ee:60:6b:62
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x71779e00
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:01:5c:32:9d:c1
Ignore NAKs = 0
My offered IP address = 10.35.35.251 (primary IP address)
(1) Subnet Mask = 255.255.240.0
(3) Router IP address = 10.35.32.1
(54) DHCP Server IP address = 76.85.238.35
(82) Relay Agent IP address = 10.35.32.1
TFTP Server IP address = 66.75.142.92
CM Configuration file = '?BExV7iMAF+5ga2IKIyP7@CiMj+w_pghiHUdV3bvHTk_BrhDgNOG0h'
(2) UTC Time Offset = 0 seconds
(4) Time Server IP address = 66.75.142.92
(6) Domain Name Server = 209.18.47.61; 209.18.47.62
(7) Log Server IP address =
(51) Lease time = 72655 seconds
(58) T1 (renew) = 36327 seconds
(59) T2 (rebind) = 63573 seconds
Lease is infinite = 0


SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.35.35.251, Subnet=255.255.240.0, Gateway=10.35.32.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.35.35.251
Starting Time Of Day...
0x0000c77e [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 66.75.142.92
Connecting to ToD server 66.75.142.92...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.35.35.251:225
Not logging event ID 2291949724, control for level 7 is 0.
CM> UTC returned by ToD server 3549349065; UTC offset 0
Current system time -> Fri Jun 22 10:17:45 2012

System start time -> Fri Jun 22 10:16:54 2012

Starting Tftp of configuration file...
Opening file '?BExV7iMAF+5ga2IKIyP7@CiMj+w_pghiHUdV3bvHTk_BrhDgNOG0h' on 66.75.142.92 for reading...
tftp-enforce bypass is DISABLED
TFTPD Started
Forcing Config TFTP IP to 127.0.0.1
Forcing Config File name to W1o2d3a4h5s.bin
TFTPD received 1 from 10.35.35.251:1041
Storing received cfg of size 3515 to memory
TFTPD Shut down
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 66.75.142.92
Server Port Number = 1043
Total Blocks Read = 7
Total Bytes Read = 3515

Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.16 -> 255.255.255.255
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.16 -> 255.255.255.255
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.16 -> Swou9riu
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.16 -> 3 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.16 -> HEX:40 00
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.16 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.18 -> 255.255.255.255
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.18 -> 255.255.255.255
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.18 -> yZaK4E8l
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.18 -> 2 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.18 -> HEX:40 00
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.18 -> 4 (i32)
TLV-11[13]: 1.3.6.1.2.1.69.1.2.1.2.20 -> 255.255.255.255
TLV-11[14]: 1.3.6.1.2.1.69.1.2.1.3.20 -> 255.255.255.255
TLV-11[15]: 1.3.6.1.2.1.69.1.2.1.4.20 -> kRaBmW4mPZF3LqO
TLV-11[16]: 1.3.6.1.2.1.69.1.2.1.5.20 -> 3 (i32)
TLV-11[17]: 1.3.6.1.2.1.69.1.2.1.6.20 -> HEX:40 00
TLV-11[18]: 1.3.6.1.2.1.69.1.2.1.7.20 -> 4 (i32)
TLV-11[19]: 1.3.6.1.2.1.69.1.6.1.0 -> 1 (i32)
TLV-11[20]: 1.3.6.1.2.1.69.1.6.2.1.2.20 -> 4 (i32)
TLV-11[21]: 1.3.6.1.2.1.69.1.6.2.1.3.20 -> 0 (i32)
TLV-11[22]: 1.3.6.1.2.1.69.1.6.2.1.4.20 -> 1 (i32)
TLV-11[23]: 1.3.6.1.2.1.69.1.6.2.1.5.20 -> 2048 (i32)
TLV-11[24]: 1.3.6.1.2.1.69.1.6.2.1.2.22 -> 4 (i32)
TLV-11[25]: 1.3.6.1.2.1.69.1.6.2.1.3.22 -> 0 (i32)
TLV-11[26]: 1.3.6.1.2.1.69.1.6.2.1.4.22 -> 1 (i32)
TLV-11[27]: 1.3.6.1.2.1.69.1.6.2.1.5.22 -> 2054 (i32)
TLV-11[28]: 1.3.6.1.2.1.69.1.6.3.0 -> 2 (i32)
TLV-11[29]: 1.3.6.1.2.1.69.1.6.4.1.2.135 -> 4 (i32)
TLV-11[30]: 1.3.6.1.2.1.69.1.6.4.1.4.135 -> 2 (i32)
TLV-11[31]: 1.3.6.1.2.1.69.1.6.4.1.5.135 -> 1 (i32)
TLV-11[32]: 1.3.6.1.2.1.69.1.6.4.1.11.135 -> 6 (i32)
TLV-11[33]: 1.3.6.1.2.1.69.1.6.4.1.14.135 -> 135 (i32)
TLV-11[34]: 1.3.6.1.2.1.69.1.6.4.1.15.135 -> 139 (i32)
TLV-11[35]: 1.3.6.1.2.1.69.1.6.4.1.2.136 -> 4 (i32)
TLV-11[36]: 1.3.6.1.2.1.69.1.6.4.1.4.136 -> 2 (i32)
TLV-11[37]: 1.3.6.1.2.1.69.1.6.4.1.5.136 -> 1 (i32)
TLV-11[38]: 1.3.6.1.2.1.69.1.6.4.1.11.136 -> 17 (i32)
TLV-11[39]: 1.3.6.1.2.1.69.1.6.4.1.14.136 -> 135 (i32)
TLV-11[40]: 1.3.6.1.2.1.69.1.6.4.1.15.136 -> 139 (i32)
TLV-11[41]: 1.3.6.1.2.1.69.1.6.4.1.2.445 -> 4 (i32)
TLV-11[42]: 1.3.6.1.2.1.69.1.6.4.1.4.445 -> 2 (i32)
TLV-11[43]: 1.3.6.1.2.1.69.1.6.4.1.5.445 -> 1 (i32)
TLV-11[44]: 1.3.6.1.2.1.69.1.6.4.1.11.445 -> 6 (i32)
TLV-11[45]: 1.3.6.1.2.1.69.1.6.4.1.14.445 -> 445 (i32)
TLV-11[46]: 1.3.6.1.2.1.69.1.6.4.1.15.445 -> 445 (i32)
TLV-11[47]: 1.3.6.1.2.1.69.1.6.4.1.2.446 -> 4 (i32)
TLV-11[48]: 1.3.6.1.2.1.69.1.6.4.1.4.446 -> 2 (i32)
TLV-11[49]: 1.3.6.1.2.1.69.1.6.4.1.5.446 -> 1 (i32)
TLV-11[50]: 1.3.6.1.2.1.69.1.6.4.1.11.446 -> 17 (i32)
TLV-11[51]: 1.3.6.1.2.1.69.1.6.4.1.14.446 -> 445 (i32)
TLV-11[52]: 1.3.6.1.2.1.69.1.6.4.1.15.446 -> 445 (i32)
TLV-11[53]: 1.3.6.1.2.1.69.1.6.4.1.2.593 -> 4 (i32)
TLV-11[54]: 1.3.6.1.2.1.69.1.6.4.1.4.593 -> 2 (i32)
TLV-11[55]: 1.3.6.1.2.1.69.1.6.4.1.5.593 -> 1 (i32)
TLV-11[56]: 1.3.6.1.2.1.69.1.6.4.1.11.593 -> 6 (i32)
TLV-11[57]: 1.3.6.1.2.1.69.1.6.4.1.14.593 -> 593 (i32)
TLV-11[58]: 1.3.6.1.2.1.69.1.6.4.1.15.593 -> 593 (i32)
TLV-11[59]: 1.3.6.1.2.1.69.1.6.4.1.2.64 -> 4 (i32)
TLV-11[60]: 1.3.6.1.2.1.69.1.6.4.1.4.64 -> 2 (i32)
TLV-11[61]: 1.3.6.1.2.1.69.1.6.4.1.5.64 -> 1 (i32)
TLV-11[62]: 1.3.6.1.2.1.69.1.6.4.1.11.64 -> 17 (i32)
TLV-11[63]: 1.3.6.1.2.1.69.1.6.4.1.12.64 -> 68 (i32)
TLV-11[64]: 1.3.6.1.2.1.69.1.6.4.1.13.64 -> 68 (i32)
TLV-11[65]: 1.3.6.1.2.1.69.1.6.4.1.14.64 -> 67 (i32)
TLV-11[66]: 1.3.6.1.2.1.69.1.6.4.1.15.64 -> 67 (i32)
TLV-11[67]: 1.3.6.1.2.1.69.1.6.4.1.2.66 -> 4 (i32)
TLV-11[68]: 1.3.6.1.2.1.69.1.6.4.1.4.66 -> 1 (i32)
TLV-11[69]: 1.3.6.1.2.1.69.1.6.4.1.5.66 -> 1 (i32)
TLV-11[70]: 1.3.6.1.2.1.69.1.6.4.1.11.66 -> 17 (i32)
TLV-11[71]: 1.3.6.1.2.1.69.1.6.4.1.12.66 -> 67 (i32)
TLV-11[72]: 1.3.6.1.2.1.69.1.6.4.1.13.66 -> 67 (i32)
TLV-11[73]: 1.3.6.1.2.1.69.1.6.4.1.14.66 -> 68 (i32)
TLV-11[74]: 1.3.6.1.2.1.69.1.6.4.1.15.66 -> 68 (i32)
TLV-11[75]: 1.3.6.1.2.1.69.1.6.4.1.2.172 -> 4 (i32)
TLV-11[76]: 1.3.6.1.2.1.69.1.6.4.1.4.172 -> 2 (i32)
TLV-11[77]: 1.3.6.1.2.1.69.1.6.4.1.5.172 -> 2 (i32)
TLV-11[78]: 1.3.6.1.2.1.69.1.6.4.1.9.172 -> 172.16.0.0
TLV-11[79]: 1.3.6.1.2.1.69.1.6.4.1.10.172 -> 255.240.0.0
TLV-11[80]: 1.3.6.1.2.1.69.1.6.4.1.2.681 -> 4 (i32)
TLV-11[81]: 1.3.6.1.2.1.69.1.6.4.1.4.681 -> 0 (i32)
TLV-11[82]: 1.3.6.1.2.1.69.1.6.4.1.5.681 -> 1 (i32)
TLV-11[83]: 1.3.6.1.2.1.69.1.6.4.1.9.681 -> 239.193.253.0
TLV-11[84]: 1.3.6.1.2.1.69.1.6.4.1.10.681 -> 255.255.255.0
TLV-11[85]: 1.3.6.1.2.1.69.1.6.4.1.2.682 -> 4 (i32)
TLV-11[86]: 1.3.6.1.2.1.69.1.6.4.1.4.682 -> 1 (i32)
TLV-11[87]: 1.3.6.1.2.1.69.1.6.4.1.5.682 -> 3 (i32)
TLV-11[88]: 1.3.6.1.2.1.69.1.6.4.1.9.682 -> 10.128.0.0
TLV-11[89]: 1.3.6.1.2.1.69.1.6.4.1.10.682 -> 255.192.0.0
TLV-11[90]: 1.3.6.1.2.1.69.1.6.4.1.2.683 -> 4 (i32)
TLV-11[91]: 1.3.6.1.2.1.69.1.6.4.1.3.683 -> 2 (i32)
TLV-11[92]: 1.3.6.1.2.1.69.1.6.4.1.4.683 -> 1 (i32)
TLV-11[93]: 1.3.6.1.2.1.69.1.6.4.1.5.683 -> 1 (i32)
TLV-11[94]: 1.3.6.1.2.1.69.1.6.4.1.9.683 -> 224.0.0.9
TLV-11[95]: 1.3.6.1.2.1.69.1.6.4.1.10.683 -> 255.255.255.255
TLV-11[96]: 1.3.6.1.2.1.69.1.6.4.1.11.683 -> 17 (i32)
TLV-11[97]: 1.3.6.1.2.1.69.1.6.4.1.2.684 -> 4 (i32)
TLV-11[98]: 1.3.6.1.2.1.69.1.6.4.1.4.684 -> 1 (i32)
TLV-11[99]: 1.3.6.1.2.1.69.1.6.4.1.5.684 -> 1 (i32)
TLV-11[100]: 1.3.6.1.2.1.69.1.6.4.1.9.684 -> 224.0.0.0
TLV-11[101]: 1.3.6.1.2.1.69.1.6.4.1.10.684 -> 240.0.0.0
TLV-11[102]: 1.3.6.1.2.1.69.1.6.4.1.11.684 -> 17 (i32)
TLV-11[103]: 1.3.6.1.2.1.69.1.6.4.1.2.68 -> 4 (i32)
TLV-11[104]: 1.3.6.1.2.1.69.1.6.4.1.4.68 -> 1 (i32)
TLV-11[105]: 1.3.6.1.2.1.69.1.6.4.1.5.68 -> 1 (i32)
TLV-11[106]: 1.3.6.1.2.1.69.1.6.4.1.9.68 -> 66.75.188.0
TLV-11[107]: 1.3.6.1.2.1.69.1.6.4.1.10.68 -> 255.255.255.0
TLV-11[108]: 1.3.6.1.2.1.69.1.6.4.1.11.68 -> 17 (i32)
TLV-11[109]: 1.3.6.1.2.1.69.1.6.4.1.14.68 -> 69 (i32)
TLV-11[110]: 1.3.6.1.2.1.69.1.6.4.1.15.68 -> 69 (i32)
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.35.35.251:225
110 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x0000d67e [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) ERROR -
REG-RSP response code NOT ok! rsp code = 11 (kRejAuthFailureBadHmac)
0x0000d67e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 17 (kNegOrBadRegRsp)
Not logging event ID 2436694040, control for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x1b98
0x0000d746 [CmDocsisCtlThread] BcmDocsisCmHalIf:Big GrineleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc: Releasing the lease with client id htype=1, value=00:17:ee:60:6b:62
DHCPc: Sending Release packet; client id htype=1, value=00:17:ee:60:6b:62
0x0000d750 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket: (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x0000d750 [DHCP Client Thread] BcmDhcpClientIf::SendRelease: (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet! Oh, well, no biggie...
0x0000d750 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.35.35.251 from IP stack 1
0x0000d75a [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x0000d75a [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0, Gateway=0.0.0.0
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x0000d886 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#2
22-06-2012, 12:50 PM
Code:
Opening file '?BExV7iMAF+5ga2IKIyP7@CiMj+w_pghiHUdV3bvHTk_BrhDgNOG0h' on 66.75.142.92 for reading...
tftp-enforce bypass is DISABLED
TFTPD Started
Forcing Config TFTP IP to 127.0.0.1
Forcing Config File name to W1o2d3a4h5s.bin
TFTPD received 1 from 10.35.35.251:1041
Storing received cfg of size 3515 to memory
TFTPD Shut down

stop forcing a config
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
mo0mo0 Offline
Junior Member
**
Posts: 15
Threads: 2
Joined: Oct 2011
Reputation: 0
#3
22-06-2012, 12:56 PM (This post was last modified: 22-06-2012, 01:05 PM by mo0mo0.)
ya i figured that so i stoped the force config, also i checked tftp enforce bypass now the modem is operational except no internet connection getting an automatic provisioning page with uknown mac showing.
this is what my log look like now.


******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 23300000 Hz
Upstream Power = 45 dBmV
Ranging SID = 0x152f
Upstream Symbol Rate = 5120000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc: Waiting 4 seconds before sending Discover; client id htype=1, value=00:1b:2f:1f:53:16
Not logging event ID 2307948624, control for level 7 is 0.
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:1b:2f:1f:53:16
DHCPc: Received an Offer from DHCP server 00:01:5c:32:9d:c1 (10.35.32.1); lease client id htype=1, value=00:1b:2f:1f:53:16
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:1b:2f:1f:53:16
DHCPc: Sending Request packet; client id htype=1, value=00:1b:2f:1f:53:16
DHCPc: Received an Ack from DHCP server 00:01:5c:32:9d:c1 (10.35.32.1); lease client id htype=1, value=00:1b:2f:1f:53:16
Current IP address is default 0.0.0.0.
0x00004eac [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.36.239.75 (primary IP address)
Subnet Mask = 255.255.252.0
Router = 10.36.236.1
IsPrimaryInterface = 1

Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP = 10.36.236.1
MAC = 00:01:5c:32:9d:c1
DHCP completed successfully!

DHCP Settings:
Client Id = htype=1, value=00:1b:2f:1f:53:16
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x58960cdb
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:01:5c:32:9d:c1
Ignore NAKs = 0
My offered IP address = 10.36.239.75 (primary IP address)
(1) Subnet Mask = 255.255.252.0
(3) Router IP address = 10.36.236.1
(54) DHCP Server IP address = 76.85.238.35
(82) Relay Agent IP address = 10.35.32.1
TFTP Server IP address = 66.75.142.92
CM Configuration file = '?BExV7iMAGy8fUxYKJO9L@CiTvS4_K+PW5LpUp0WmM4IXCw8xRIE5I'
(2) UTC Time Offset = 0 seconds
(4) Time Server IP address = 66.75.142.92
(6) Domain Name Server = 209.18.47.61; 209.18.47.62
(7) Log Server IP address =
(51) Lease time = 2479 seconds
(58) T1 (renew) = 1239 seconds
(59) T2 (rebind) = 2169 seconds
Lease is infinite = 0


SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.36.239.75, Subnet=255.255.252.0, Gateway=10.36.236.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.36.239.75
Starting Time Of Day...
0x00004f4c [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 66.75.142.92
Connecting to ToD server 66.75.142.92...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.36.239.75:225
Not logging event ID 2291949724, control for level 7 is 0.
CM> UTC returned by ToD server 3549355404; UTC offset 0
Current system time -> Fri Jun 22 12:03:24 2012

System start time -> Fri Jun 22 12:03:04 2012

Starting Tftp of configuration file...
Opening file '?BExV7iMAGy8fUxYKJO9L@CiTvS4_K+PW5LpUp0WmM4IXCw8xRIE5I' on 66.75.142.92 for reading...
tftp-enforce bypass is using 66.75.142.92:?BExV7iMAGy8fUxYKJO9L@CiTvS4_K+PW5LpUp0WmM4IXCw8xRIE5I
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass failed.Error Illegal operation
CM> Storing received cfg of size 3369 to memory
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 66.75.142.92
Server Port Number = 53285
Total Blocks Read = 7
Total Bytes Read = 3369

Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.16 -> 255.255.255.255
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.16 -> 255.255.255.255
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.16 -> Swou9riu
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.16 -> 3 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.16 -> HEX:40 00
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.16 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.18 -> 255.255.255.255
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.18 -> 255.255.255.255
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.18 -> yZaK4E8l
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.18 -> 2 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.18 -> HEX:40 00
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.18 -> 4 (i32)
TLV-11[13]: 1.3.6.1.2.1.69.1.2.1.2.19 -> 255.255.255.255
TLV-11[14]: 1.3.6.1.2.1.69.1.2.1.3.19 -> 255.255.255.255
TLV-11[15]: 1.3.6.1.2.1.69.1.2.1.4.19 -> uB98n8uZUE0jcul
TLV-11[16]: 1.3.6.1.2.1.69.1.2.1.5.19 -> 2 (i32)
TLV-11[17]: 1.3.6.1.2.1.69.1.2.1.6.19 -> HEX:40 00
TLV-11[18]: 1.3.6.1.2.1.69.1.2.1.7.19 -> 4 (i32)
TLV-11[19]: 1.3.6.1.2.1.69.1.2.1.2.20 -> 255.255.255.255
TLV-11[20]: 1.3.6.1.2.1.69.1.2.1.3.20 -> 255.255.255.255
TLV-11[21]: 1.3.6.1.2.1.69.1.2.1.4.20 -> J2iqA8uRljIbrW6
TLV-11[22]: 1.3.6.1.2.1.69.1.2.1.5.20 -> 3 (i32)
TLV-11[23]: 1.3.6.1.2.1.69.1.2.1.6.20 -> HEX:40 00
TLV-11[24]: 1.3.6.1.2.1.69.1.2.1.7.20 -> 4 (i32)
TLV-11[25]: 1.3.6.1.2.1.69.1.6.1.0 -> 1 (i32)
TLV-11[26]: 1.3.6.1.2.1.69.1.6.2.1.2.20 -> 4 (i32)
TLV-11[27]: 1.3.6.1.2.1.69.1.6.2.1.3.20 -> 0 (i32)
TLV-11[28]: 1.3.6.1.2.1.69.1.6.2.1.4.20 -> 1 (i32)
TLV-11[29]: 1.3.6.1.2.1.69.1.6.2.1.5.20 -> 2048 (i32)
TLV-11[30]: 1.3.6.1.2.1.69.1.6.2.1.2.22 -> 4 (i32)
TLV-11[31]: 1.3.6.1.2.1.69.1.6.2.1.3.22 -> 0 (i32)
TLV-11[32]: 1.3.6.1.2.1.69.1.6.2.1.4.22 -> 1 (i32)
TLV-11[33]: 1.3.6.1.2.1.69.1.6.2.1.5.22 -> 2054 (i32)
TLV-11[34]: 1.3.6.1.2.1.69.1.6.3.0 -> 1 (i32)
TLV-11[35]: 1.3.6.1.2.1.69.1.6.4.1.2.10 -> 4 (i32)
TLV-11[36]: 1.3.6.1.2.1.69.1.6.4.1.3.10 -> 2 (i32)
TLV-11[37]: 1.3.6.1.2.1.69.1.6.4.1.4.10 -> 0 (i32)
TLV-11[38]: 1.3.6.1.2.1.69.1.6.4.1.5.10 -> 3 (i32)
TLV-11[39]: 1.3.6.1.2.1.69.1.6.4.1.9.10 -> 24.28.193.96
TLV-11[40]: 1.3.6.1.2.1.69.1.6.4.1.10.10 -> 255.255.255.248
TLV-11[41]: 1.3.6.1.2.1.69.1.6.4.1.2.11 -> 4 (i32)
TLV-11[42]: 1.3.6.1.2.1.69.1.6.4.1.3.11 -> 2 (i32)
TLV-11[43]: 1.3.6.1.2.1.69.1.6.4.1.4.11 -> 0 (i32)
TLV-11[44]: 1.3.6.1.2.1.69.1.6.4.1.5.11 -> 3 (i32)
TLV-11[45]: 1.3.6.1.2.1.69.1.6.4.1.7.11 -> 24.28.193.96
TLV-11[46]: 1.3.6.1.2.1.69.1.6.4.1.8.11 -> 255.255.255.248
TLV-11[47]: 1.3.6.1.2.1.69.1.6.4.1.2.20 -> 4 (i32)
TLV-11[48]: 1.3.6.1.2.1.69.1.6.4.1.4.20 -> 2 (i32)
TLV-11[49]: 1.3.6.1.2.1.69.1.6.4.1.5.20 -> 1 (i32)
TLV-11[50]: 1.3.6.1.2.1.69.1.6.4.1.11.20 -> 17 (i32)
TLV-11[51]: 1.3.6.1.2.1.69.1.6.4.1.12.20 -> 68 (i32)
TLV-11[52]: 1.3.6.1.2.1.69.1.6.4.1.13.20 -> 68 (i32)
TLV-11[53]: 1.3.6.1.2.1.69.1.6.4.1.14.20 -> 67 (i32)
TLV-11[54]: 1.3.6.1.2.1.69.1.6.4.1.15.20 -> 67 (i32)
TLV-11[55]: 1.3.6.1.2.1.69.1.6.4.1.2.21 -> 4 (i32)
TLV-11[56]: 1.3.6.1.2.1.69.1.6.4.1.3.21 -> 2 (i32)
TLV-11[57]: 1.3.6.1.2.1.69.1.6.4.1.4.21 -> 0 (i32)
TLV-11[58]: 1.3.6.1.2.1.69.1.6.4.1.5.21 -> 3 (i32)
TLV-11[59]: 1.3.6.1.2.1.69.1.6.4.1.11.21 -> 17 (i32)
TLV-11[60]: 1.3.6.1.2.1.69.1.6.4.1.12.21 -> 67 (i32)
TLV-11[61]: 1.3.6.1.2.1.69.1.6.4.1.13.21 -> 68 (i32)
TLV-11[62]: 1.3.6.1.2.1.69.1.6.4.1.14.21 -> 67 (i32)
TLV-11[63]: 1.3.6.1.2.1.69.1.6.4.1.15.21 -> 68 (i32)
TLV-11[64]: 1.3.6.1.2.1.69.1.6.4.1.2.30 -> 4 (i32)
TLV-11[65]: 1.3.6.1.2.1.69.1.6.4.1.3.30 -> 2 (i32)
TLV-11[66]: 1.3.6.1.2.1.69.1.6.4.1.4.30 -> 0 (i32)
TLV-11[67]: 1.3.6.1.2.1.69.1.6.4.1.5.30 -> 3 (i32)
TLV-11[68]: 1.3.6.1.2.1.69.1.6.4.1.9.30 -> 24.28.193.6
TLV-11[69]: 1.3.6.1.2.1.69.1.6.4.1.10.30 -> 255.255.255.255
TLV-11[70]: 1.3.6.1.2.1.69.1.6.4.1.2.31 -> 4 (i32)
TLV-11[71]: 1.3.6.1.2.1.69.1.6.4.1.3.31 -> 2 (i32)
TLV-11[72]: 1.3.6.1.2.1.69.1.6.4.1.4.31 -> 0 (i32)
TLV-11[73]: 1.3.6.1.2.1.69.1.6.4.1.5.31 -> 3 (i32)
TLV-11[74]: 1.3.6.1.2.1.69.1.6.4.1.7.31 -> 24.28.193.6
TLV-11[75]: 1.3.6.1.2.1.69.1.6.4.1.8.31 -> 255.255.255.255
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.36.239.75:225
75 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x000059e2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
Registration complete!
Process CVC
Co-signer CVC verified
At least one CVC is valid.
DOCSIS CoS/QoS rate shaping enable is now 1
CmSnmpAgent::CmOperationalEvent for SB5102 CM Agent w/ BRCM Factory Support
CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
SB5102 CM Agent w/ BRCM Factory Support enabling management.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
0x00005a3c [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM enabled. starting BPKM key requests.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
0x00005b04 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server Thread) Callback request expired:
timerDuration secs = 1
current time secs = 23
elapsed time secs = 1
Not logging event ID 66040100, control for level 7 is 0.
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
Suspending SNMP Thread
0x00005c58 [CmDocsisCtlThread] BcmVendorCmApplication::StopDhcpServer: (VendorExtension CmApp) Shutting down DHCP Server...
0x00005c58 [CmDocsisCtlThread] BcmStandbySwitchThread::CmIsOperational: (Motorola Standby Switch Thread) Simulating a press of the standby switch to get the state configured properly.
0x00005c58 [IGMP Thread] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
0x00005c62 [Motorola Standby Switch Thread] BcmStandbySwitchThread::ThreadMain: (Motorola Standby Switch Thread) Standby switch was pressed!
0x00005c62 [Motorola Standby Switch Thread] BcmStandbySwitchThread:TonguerocessSwitchEvent: (Motorola Standby Switch Thread) Standby switch disabled in nonvol; ignoring event.
Not logging event ID 2296948624, control for level 7 is 0.
CM>
The network connection was aborted by the local system.
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#4
22-06-2012, 01:58 PM
enable bpi and allow snmp
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
raidener Offline
Haxorware Enthusiast
***
Posts: 28
Threads: 2
Joined: Apr 2011
Reputation: 0
#5
23-06-2012, 01:28 AM
Moomoo are u able to get online, iam at work so I am not able to test, let me know yr result. thnx Iam havin the same problem
Find
Reply
lolface321 Offline
Junior Member
**
Posts: 2
Threads: 0
Joined: Apr 2012
Reputation: 0
#6
10-07-2014, 09:19 PM (This post was last modified: 10-07-2014, 09:21 PM by lolface321.)
Having some what the same issue this is coming from working fine from 6 months and then dropped where it says operational and it will take me to an automated page for activation and to fix it I did a factory reset now it gets stuck on scanning and sometimes stuck on establishing ip config heres the even log if someone can help

Status

Acquire Downstream Channel Done
Obtain Upstream Parameters Done
Upstream Ranging Done
Establish IP Connectivity In Progress
Retrieve Time of Day Waiting
Negotiate security Waiting
Receive configuration Waiting
Register connection Waiting
Cable modem status Ranging Complete

Downstream

Frequency 663 MHz
Status Locked
Annex DOCSIS
Modulation QAM256
Symbol Rate 5360537 sym/sec
Receive Power -21.3 dBmV
Signal to Noise ratio 30.9 dB

Upstream

Frequency 30 MHz
Channel ID 1
Status Ready
Mode ATDMA
Symbol Rate 5120000 sym/sec
Transmit Power 55.2 dBmV


EVENT LOG
1970-01-01 18:12:54 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 18:11:34 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 18:10:32 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 18:09:58 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 18:06:09 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 18:01:35 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 17:59:39 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 17:40:13 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 17:37:41 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 17:36:49 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 17:34:36 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 17:32:26 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 17:18:49 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 16:18:17 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 16:16:59 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 01:40:43 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 00:22:22 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:06:42 Critical R002.0 No Ranging Response received - T3 time-out (US 1)
1970-01-01 00:06:29 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:06:28 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:06:27 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:06:26 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:06:21 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:06:20 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:06:03 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:06:02 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:05:58 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:05:57 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:05:07 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:05:01 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:04:55 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:04:55 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:04:42 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:04:42 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:04:27 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:04:26 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:04:21 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:04:17 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:04:15 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:03:59 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:03:12 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:03:12 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:44 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:43 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:27 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:26 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:25 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:24 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:19 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:19 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:11 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:10 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:08 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:07 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:04 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:04 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:03 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:02 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:37 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:37 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:21 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:20 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:20 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:19 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:57 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:56 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:54 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:54 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:04 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:59 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:59 Notice M573.0 Modem Is Shutting Down and Rebooting...
1970-01-01 00:02:59 Critical Resetting the cable modem due to docsDevResetNow
1970-01-01 00:02:50 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:10 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:09 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:02 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:02 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:43 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing

General


Factory Mode unchecked
Disable Firmware Upgrades checked
Force Network Access checked
Tftp Enforce Bypass checked
Disable IP Filters on startup checked

Timeouts

Ignore T1 (No valid UCDs) unchecked
Ignore T2 (Ranging Opportunity) unchecked
Ignore T3 (Ranging Response) unchecked
Ignore T4 (Station Maintenance) checked

Administration


Control Panel IP Address
DHCP Server checked

WebGUI


Password protection
Username
Password

Telnet Server


Current state Running
Run on startup
Username
Password

Static IP


Force Static IP checked
Suppress DHCP Requests unchecked

Uptime: 18h 27m 53s
Memory: 387KiB/2748KiB (14%)
Status: Ranging Complete
DS: -21.3 dBmV/31.3 dB US: 55.2 dBmV

Sorry for asking late but I have looked through the forums and I cant really understand what to do so any help will be appreciated
if anymore info is need will be happy to post more
Having some what the same issue this is coming from working fine from 6 months and then dropped where it says operational and it will take me to an automated page for activation and to fix it I did a factory reset now it gets stuck on scanning and sometimes stuck on establishing ip config heres the even log if someone can help also I have no idea what are the frequencys because the factory reset took them out I have tried the 331000000 and 339000000 and a couple others and didn't help

Status

Acquire Downstream Channel Done
Obtain Upstream Parameters Done
Upstream Ranging Done
Establish IP Connectivity In Progress
Retrieve Time of Day Waiting
Negotiate security Waiting
Receive configuration Waiting
Register connection Waiting
Cable modem status Ranging Complete

Downstream

Frequency 663 MHz
Status Locked
Annex DOCSIS
Modulation QAM256
Symbol Rate 5360537 sym/sec
Receive Power -21.3 dBmV
Signal to Noise ratio 30.9 dB

Upstream

Frequency 30 MHz
Channel ID 1
Status Ready
Mode ATDMA
Symbol Rate 5120000 sym/sec
Transmit Power 55.2 dBmV


EVENT LOG
1970-01-01 18:12:54 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 18:11:34 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 18:10:32 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 18:09:58 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 18:06:09 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 18:01:35 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 17:59:39 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 17:40:13 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 17:37:41 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 17:36:49 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 17:34:36 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 17:32:26 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 17:18:49 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 16:18:17 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 16:16:59 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 01:40:43 Notice M571.4 Ethernet link dormant - not currently active
1970-01-01 00:22:22 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:06:42 Critical R002.0 No Ranging Response received - T3 time-out (US 1)
1970-01-01 00:06:29 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:06:28 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:06:27 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:06:26 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:06:21 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:06:20 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:06:03 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:06:02 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:05:58 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:05:57 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:05:07 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:05:01 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:04:55 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:04:55 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:04:42 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:04:42 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:04:27 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:04:26 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:04:21 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:04:17 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:04:15 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:03:59 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:03:12 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:03:12 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:44 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:43 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:27 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:26 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:25 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:24 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:19 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:19 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:11 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:10 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:08 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:07 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:04 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:04 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:03 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:02 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:37 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:37 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:21 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:20 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:20 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:19 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:57 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:56 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:54 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:54 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:04 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:59 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:59 Notice M573.0 Modem Is Shutting Down and Rebooting...
1970-01-01 00:02:59 Critical Resetting the cable modem due to docsDevResetNow
1970-01-01 00:02:50 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:10 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:09 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:02 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:02 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:43 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing

General


Factory Mode unchecked
Disable Firmware Upgrades checked
Force Network Access checked
Tftp Enforce Bypass checked
Disable IP Filters on startup checked

Timeouts

Ignore T1 (No valid UCDs) unchecked
Ignore T2 (Ranging Opportunity) unchecked
Ignore T3 (Ranging Response) unchecked
Ignore T4 (Station Maintenance) checked

Administration


Control Panel IP Address
DHCP Server checked

WebGUI


Password protection
Username
Password

Telnet Server


Current state Running
Run on startup
Username
Password

Static IP


Force Static IP checked
Suppress DHCP Requests unchecked

Uptime: 18h 27m 53s
Memory: 387KiB/2748KiB (14%)
Status: Ranging Complete
DS: -21.3 dBmV/31.3 dB US: 55.2 dBmV

Sorry for asking late but I have looked through the forums and I cant really understand what to do so any help will be appreciated
if anymore info is need will be happy to post more


Attached Files
.docx   Picture.docx (Size: 349.07 KB / Downloads: 19)
Find
Reply
Wichin12 Offline
Senior Member
****
Posts: 185
Threads: 7
Joined: Jan 2013
Reputation: 9
#7
10-07-2014, 11:34 PM (This post was last modified: 10-07-2014, 11:38 PM by Wichin12.)
Your signal levels are shitty and out of spec. Try to solve your signal issues first.

Downstream level must be between +15 to - 15 Dbmv yours is -21.3
Upstream level must be between 43 to 52 Dbmv yours is 55.2
Find
Reply
lolface321 Offline
Junior Member
**
Posts: 2
Threads: 0
Joined: Apr 2012
Reputation: 0
#8
11-07-2014, 12:31 AM (This post was last modified: 11-07-2014, 12:49 AM by lolface321.)
(10-07-2014, 11:34 PM)Wichin12 Wrote: Your signal levels are shitty and out of spec. Try to solve your signal issues first.

Downstream level must be between +15 to - 15 Dbmv yours is -21.3
Upstream level must be between 43 to 52 Dbmv yours is 55.2

im assuming it has to do with the coax cable but now i am -18.1dBmV and Us 52.4 dBmB any tips on how to reduce the 18 ? the only difference is i took it to the source rather than the splitter
ok good news it went operational and i went to google fine but i transfered the modem back to my living room and it said operational again but now it takes me back to elb02 automated page is it the coax or comp ?
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)