29-04-2014, 02:35 PM
(This post was last modified: 29-04-2014, 04:06 PM by franklinzero.)
Hello, I have a 5101 with haxorware, he gets to be operational and navigating, but is randomly restarting, sometimes it gets 5min online and reboot, others go online for hours.
I searched the forum and found various answers to similar problems and tried all the solutions and nothing helped me. I also saw that post the log of haxor interface dont help and learned to do the telnet log.
Log1 - The log from giving "run" on the modem to the extent that it is operating
Log2 - The log from "operational" to the random reboot.
Already tried to Spoof modem, eneable the smnp, change the smnp port, eneable to ignore t4 timeout (who let me operational but not navigating). Already tried with and without an split in cable. And change the certificates too, it happens with all 4 what i tried (1 of 1MB, 2 of 10MB and 1 of 20MB).
I searched the forum and found various answers to similar problems and tried all the solutions and nothing helped me. I also saw that post the log of haxor interface dont help and learned to do the telnet log.
Log1 - The log from giving "run" on the modem to the extent that it is operating
Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.04.28 22:25:03 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon
Username: o root
Password: *****
Welcome.
CM>
CM> run
CM>
CM> run_app
Running the system...
Beginning Cable Modem operation...
0x00019a28 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 0
Favorite[0].freq = 507000000
Attempting Downstream FEC lock @ freq= 507000000 Hz, QAM64/256
CM> Found energy at frequency 507000000Hz! Publishing event kEventEnergyDetected...
0x00019c80 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 507000000 Hz
Carrier Offset = 8 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode =
Tuner AGC =
IF AGC =
Power Level = -2 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM> Calculating maximum number of IP filters:
Each IP filter consumes 8112 bytes of RAM.
Current free RAM is 482036 bytes.
Max heap reserved for IP filters (25%) = 120509
We can support 16 IP filters.
Calculating maximum number of LLC filters:
Each LLC filter consumes 720 bytes of RAM.
Current free RAM is 475760 bytes.
Max heap reserved for LLC filters (25%) = 118940
We can support 165 LLC filters.
0x00019e4c [CmDocsisCtlThread] BcmCmDocsisCtlThread::RxMsgEvent: (CmDocsisCtlThread) WARNING - iteration limit reached. giving up control...
CM> Selecting UCD for Us Channel 2
0x0001a5fe [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x0001a888 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RxMsgEvent: (CmDocsisCtlThread) WARNING - iteration limit reached. giving up control...
0x0001a8a6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x0001a8a6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 46.0 dBmV
0x0001a8a6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
RNG-RSP Adj: tim=2508 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 2
Upstream Frequency = 36200000 Hz
Upstream Power = 47 dBmV
Ranging SID = 0x7d0
Upstream Symbol Rate = 2560000 sym/sec
******************************************
Starting IP Initialization with DHCP...
DHCPc: Waiting 1 seconds before sending Discover; client id htype=1, value=
Not logging event ID 2307948624, control for level 7 is 0.
CM> DHCPc: Sending Discover packet; client id htype=1, value=
DHCPc: Received an Offer from DHCP server (); lease client id htype=1, value=
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=
DHCPc: Sending Request packet; client id htype=1, value=
DHCPc: Received an Ack from DHCP server (); lease client id htype=1, value=
Current IP address is default 0.0.0.0.
0x0001c53e [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = (primary IP address)
Subnet Mask =
Router =
IsPrimaryInterface = 1
Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP =
MAC =
DHCP completed successfully!
DHCP Settings:
Client Id = htype=1, value=
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID =
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr =
Ignore NAKs = 0
My offered IP address = (primary IP address)
(1) Subnet Mask =
(3) Router IP address =
(54) DHCP Server IP address =
(82) Relay Agent IP address =
TFTP Server IP address =
CM Configuration file = ''
(2) UTC Time Offset = -10800 seconds
(4) Time Server IP address = ;
(6) Domain Name Server =
(7) Log Server IP address =
(51) Lease time = 604800 seconds
(58) T1 (renew) = 302400 seconds
(59) T2 (rebind) = 529200 seconds
Lease is infinite = 0
(122) PacketCable/CableHome -== SubOptions ==-
SubOpt(1) Primary Dhcp Server =
SubOpt(2) Secondary Dhcp Server =
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=, Subnet=, Gateway=
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr =
Starting Time Of Day...
0x0001c5e8 [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: ;
Connecting to ToD server ...
Sending UDP ToD request to server...
SNMP Agent Binding to :225
Not logging event ID 2291949724, control for level 7 is 0.
UTC returned by ToD server 3607723540; UTC offset -10800
Current system time -> Mon Apr 28 22:25:40 2014
System start time -> Mon Apr 28 22:23:44 2014
Starting Tftp of configuration file...
Opening file '' on for reading...
tftp-enforce bypass is DISABLED
Storing received cfg of size 2956 to memory
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address =
Server Port Number = 69
Total Blocks Read = 6
Total Bytes Read = 2956
Config file was read! IP Initialization completed...
Motorola vendor ID
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.1 ->
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.1 ->
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.1 -> public
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.1 -> 3 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.7.1 -> 4 (i32)
TLV-11[6]: 1.3.6.1.2.1.69.1.6.4.1.2.1 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.6.4.1.3.1 -> 1 (i32)
TLV-11[8]: 1.3.6.1.2.1.69.1.6.4.1.5.1 -> 3 (i32)
TLV-11[9]: 1.3.6.1.2.1.69.1.6.4.1.6.1 -> 2 (i32)
TLV-11[10]: 1.3.6.1.2.1.69.1.6.4.1.11.1 -> 17 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.6.4.1.12.1 -> 135 (i32)
TLV-11[12]: 1.3.6.1.2.1.69.1.6.4.1.13.1 -> 139 (i32)
TLV-11[13]: 1.3.6.1.2.1.69.1.6.4.1.14.1 -> 0 (i32)
TLV-11[14]: 1.3.6.1.2.1.69.1.6.4.1.15.1 -> 65535 (i32)
TLV-11[15]: 1.3.6.1.2.1.69.1.6.4.1.2.2 -> 4 (i32)
TLV-11[16]: 1.3.6.1.2.1.69.1.6.4.1.3.2 -> 1 (i32)
TLV-11[17]: 1.3.6.1.2.1.69.1.6.4.1.5.2 -> 3 (i32)
TLV-11[18]: 1.3.6.1.2.1.69.1.6.4.1.6.2 -> 2 (i32)
TLV-11[19]: 1.3.6.1.2.1.69.1.6.4.1.11.2 -> 17 (i32)
TLV-11[20]: 1.3.6.1.2.1.69.1.6.4.1.12.2 -> 445 (i32)
TLV-11[21]: 1.3.6.1.2.1.69.1.6.4.1.13.2 -> 445 (i32)
TLV-11[22]: 1.3.6.1.2.1.69.1.6.4.1.14.2 -> 0 (i32)
TLV-11[23]: 1.3.6.1.2.1.69.1.6.4.1.15.2 -> 65535 (i32)
TLV-11[24]: 1.3.6.1.2.1.69.1.6.4.1.2.3 -> 4 (i32)
TLV-11[25]: 1.3.6.1.2.1.69.1.6.4.1.3.3 -> 1 (i32)
TLV-11[26]: 1.3.6.1.2.1.69.1.6.4.1.5.3 -> 1 (i32)
TLV-11[27]: 1.3.6.1.2.1.69.1.6.4.1.6.3 -> 2 (i32)
TLV-11[28]: 1.3.6.1.2.1.69.1.6.4.1.11.3 -> 6 (i32)
TLV-11[29]: 1.3.6.1.2.1.69.1.6.4.1.12.3 -> 80 (i32)
TLV-11[30]: 1.3.6.1.2.1.69.1.6.4.1.13.3 -> 80 (i32)
TLV-11[31]: 1.3.6.1.2.1.69.1.6.4.1.14.3 -> 0 (i32)
TLV-11[32]: 1.3.6.1.2.1.69.1.6.4.1.15.3 -> 65535 (i32)
TLV-11[33]: 1.3.6.1.2.1.69.1.6.4.1.2.4 -> 4 (i32)
TLV-11[34]: 1.3.6.1.2.1.69.1.6.4.1.3.4 -> 1 (i32)
TLV-11[35]: 1.3.6.1.2.1.69.1.6.4.1.5.4 -> 1 (i32)
TLV-11[36]: 1.3.6.1.2.1.69.1.6.4.1.6.4 -> 2 (i32)
TLV-11[37]: 1.3.6.1.2.1.69.1.6.4.1.11.4 -> 17 (i32)
TLV-11[38]: 1.3.6.1.2.1.69.1.6.4.1.12.4 -> 53 (i32)
TLV-11[39]: 1.3.6.1.2.1.69.1.6.4.1.13.4 -> 53 (i32)
TLV-11[40]: 1.3.6.1.2.1.69.1.6.4.1.14.4 -> 0 (i32)
TLV-11[41]: 1.3.6.1.2.1.69.1.6.4.1.15.4 -> 65535 (i32)
TLV-11[42]: 1.3.6.1.2.1.69.1.6.4.1.2.5 -> 4 (i32)
TLV-11[43]: 1.3.6.1.2.1.69.1.6.4.1.3.5 -> 1 (i32)
TLV-11[44]: 1.3.6.1.2.1.69.1.6.4.1.5.5 -> 1 (i32)
TLV-11[45]: 1.3.6.1.2.1.69.1.6.4.1.6.5 -> 2 (i32)
TLV-11[46]: 1.3.6.1.2.1.69.1.6.4.1.11.5 -> 6 (i32)
TLV-11[47]: 1.3.6.1.2.1.69.1.6.4.1.12.5 -> 21 (i32)
TLV-11[48]: 1.3.6.1.2.1.69.1.6.4.1.13.5 -> 21 (i32)
TLV-11[49]: 1.3.6.1.2.1.69.1.6.4.1.14.5 -> 0 (i32)
TLV-11[50]: 1.3.6.1.2.1.69.1.6.4.1.15.5 -> 65535 (i32)
TLV-11[51]: 1.3.6.1.2.1.69.1.6.4.1.2.6 -> 4 (i32)
TLV-11[52]: 1.3.6.1.2.1.69.1.6.4.1.3.6 -> 1 (i32)
TLV-11[53]: 1.3.6.1.2.1.69.1.6.4.1.5.6 -> 3 (i32)
TLV-11[54]: 1.3.6.1.2.1.69.1.6.4.1.6.6 -> 2 (i32)
TLV-11[55]: 1.3.6.1.2.1.69.1.6.4.1.11.6 -> 6 (i32)
TLV-11[56]: 1.3.6.1.2.1.69.1.6.4.1.12.6 -> 25 (i32)
TLV-11[57]: 1.3.6.1.2.1.69.1.6.4.1.13.6 -> 25 (i32)
TLV-11[58]: 1.3.6.1.2.1.69.1.6.4.1.14.6 -> 0 (i32)
TLV-11[59]: 1.3.6.1.2.1.69.1.6.4.1.15.6 -> 65535 (i32)
TLV-11[60]: 1.3.6.1.4.1.4115.1.3.1.1.2.3.2.0 -> 4 (i32) UNKNOWN, ignoring.
TLV-11[61]: 1.3.6.1.4.1.4115.10.1.20.0 -> 1066551 (i32) UNKNOWN, ignoring.
TLV-11[62]: 1.3.6.1.4.1.1166.1.19.3.1.27.0 -> 2 (i32)
TLV-11[63]: 1.3.6.1.2.1.69.1.3.3.0 -> 2 (i32)
TLV-11[64]: 1.3.6.1.2.1.69.1.2.1.6.1 -> HEX:40 00
TLV-11[65]: 1.3.6.1.2.1.69.1.2.1.2.2 ->
TLV-11[66]: 1.3.6.1.2.1.69.1.2.1.3.2 ->
TLV-11[67]: 1.3.6.1.2.1.69.1.2.1.4.2 -> public
TLV-11[68]: 1.3.6.1.2.1.69.1.2.1.5.2 -> 3 (i32)
TLV-11[69]: 1.3.6.1.2.1.69.1.2.1.6.2 -> HEX:40 00
TLV-11[70]: 1.3.6.1.2.1.69.1.2.1.7.2 -> 4 (i32)
TLV-11[71]: 1.3.6.1.4.1.4115.10.1.24.0 -> 2 (i32) UNKNOWN, ignoring.
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to :225
71 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x0001ce80 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
Registration complete!
Process CVC
Non-Vol BPI Settings successfully written to the device.
Manufacturer CVC verified
At least one CVC is valid.
DOCSIS CoS/QoS rate shaping enable is now 1
CmSnmpAgent::CmOperationalEvent for SB5102 CM Agent w/ BRCM Factory Support
CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
SB5102 CM Agent w/ BRCM Factory Support enabling management.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
0x0001cf02 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM enabled. starting BPKM key requests.
Logging event: TLV-11 - unrecognized OID
Sending syslog message from IF 1 to :
<133> CABLEMODEM [DOCSIS]: <73040100> TLV-11 - unrecognized OID
Logging event: TLV-11 - unrecognized OID
Sending syslog message from IF 1 to :
<133> CABLEMODEM [DOCSIS]: <73040100> TLV-11 - unrecognized OID
Logging event: TLV-11 - unrecognized OID
Sending syslog message from IF 1 to :
<133> CABLEMODEM [DOCSIS]: <73040100> TLV-11 - unrecognized OID
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
Not logging event ID 66040100, control for level 7 is 0.
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.
mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
Suspending SNMP Thread
0x0001d3c6 [CmDocsisCtlThread] BcmVendorCmApplication::StopDhcpServer: (VendorExtension CmApp) Shutting down DHCP Server...
0x0001d3c6 [CmDocsisCtlThread] BcmStandbySwitchThread::CmIsOperational: (Motorola Standby Switch Thread) Simulating a press of the standby switch to get the state configured properly.
0x0001d3d0 [IGMP Thread] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
0x0001d3d0 [Motorola Standby Switch Thread] BcmStandbySwitchThread::ThreadMain: (Motorola Standby Switch Thread) Standby switch was pressed!
0x0001d3d0 [Motorola Standby Switch Thread] BcmStandbySwitchThread::ProcessSwitchEvent: (Motorola Standby Switch Thread) Standby switch disabled in nonvol; ignoring event.
Not logging event ID 2296948624, control for level 7 is 0.
CM> su auto_console 0
CM> auto_console 0
Error - Unknown command: 'auto_console 0'
CM> cr cd
CM>
CM> cd doc
CM> cd doc
Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)
CM -> docsis_ctl
CM/DocsisCtl> up_dis
CM/DocsisCtl>
CM/DocsisCtl> up_dis
Simulating UP-DIS message.
Received an UP-DIS message from the CMTS!
Mode = disable transmitter
BcmCmDocsisStatusEventCodes::kCmIsNotOperational
0x00033bb2 [CmDocsisCtlThread] BcmVendorCmApplication::StartDhcpServer: (VendorExtension CmApp) Starting DHCP Server!
0x00033bb2 [IGMP Thread] BcmIgmpThread::Stopping Igmp Thread...: (IGMP Thread)
CamDeleteAddress: Deleted address from cam segment 0
Not logging event ID 2436694041, control for level 7 is 0.
0x00033bda [CmBpiManagerThd] BcmDocsisCmHalIf::SelectActiveBpiKey: (DOCSIS CableModem HalIf) WARNING - BPI is now disabled!
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0x7d0
0x00033c7a [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc: Releasing the lease with client id htype=1, value=
DHCPc: Sending Release packet; client id htype=1, value=
0x00033c84 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket: (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x00033c84 [DHCP Client Thread] BcmDhcpClientIf::SendRelease: (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet! Oh, well, no biggie...
0x00033c84 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address from IP stack 1
0x00033c8e [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x00033c8e [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
CM/DocsisCtl> DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x00033d92 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x00033d92 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x00033da6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncStop: (CmDocsisCtlThread)
*
* Locking off-frequency so that we don't receive any
* messages or data. Ignore the scan messages that follow...
*
Timeout is forever; stopping timer.
0x00033dba [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 7000000
Scanning DS Channel at 7000000 Hz... (Initial target freq)
CM/DocsisCtl> Found energy at frequency 7000000Hz! Publishing event kEventEnergyDetected...
cd
CM/DocsisCtl>
CM/DocsisCtl> cd /
CM/DocsisCtl> cd /
Active Command Table: CM DOCSIS Commands (CM)
CM
CM> cd
CM>
CM> cd n/b
CM> cd n/b
Active Command Table: BFC Application Settings Commands (bfcApp)
CM -> non-vol -> bfcApp
CM/NonVol/BfcApp> auto_console
CM/NonVol/BfcApp>
CM/NonVol/BfcApp> auto_console 0
CM/NonVol/BfcApp> auto_console 0
Automatically stop at console = 0
CM/NonVol/BfcApp> write
CM/NonVol/BfcApp>
CM/NonVol/BfcApp> write
Dynamic Non-Vol Settings successfully written to the device.
Permanent Non-Vol Settings successfully written to the device.
CM/NonVol/BfcApp>Log2 - The log from "operational" to the random reboot.
Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.04.29 09:56:13 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon
Username: root
Password: *****
Welcome.
CM>
CM> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
0x00141a36 [CmDocsisCtlThread] BcmCmDocsisCtlThread::T4NoStationMaintEvent: (CmDocsisCtlThread) ERROR - no Station Maint map op -> restart error
*
* We are currently at Freq 507000000 Hz...
* Current US Channel ID 2
* TargetDsFreq 507000000 Hz...
* TargetUsChan 2
* TargetContext 0
*
0x00141a36 [CmDocsisCtlThread] BcmCmDocsisCtlThread::T4NoStationMaintEvent: (CmDocsisCtlThread) MOTOROLA-SPECIFIC -> REBOOTING IN CASE OF T4
DefaultSnmpAgentClass::ShutdownPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support disabling management.
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support disabling management.
SB5102 CPE Agent w/ BRCM Factory Support defering traps.
CmSnmpAgent waiting for packets, events, and traps to clear...
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 timeout
Logging event: Modem Is Shutting Down and Rebooting...
Sending syslog message from IF 1 to :
<133> CABLEMODEM [Motorola Corporation]: <2300955924> Modem Is Shutting Down and Rebooting...
Bandwidth request failure! Status = 0
CM> Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc: Releasing the lease with client id htype=1, value=
DHCPc: Sending Release packet; client id htype=1, value=
0x00141c34 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address from IP stack 1
0x00141c34 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x00141c3e [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
Bandwidth request failure! Status = 0Already tried to Spoof modem, eneable the smnp, change the smnp port, eneable to ignore t4 timeout (who let me operational but not navigating). Already tried with and without an split in cable. And change the certificates too, it happens with all 4 what i tried (1 of 1MB, 2 of 10MB and 1 of 20MB).
