Haxorware Forums › General › Modems v
OneClick

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
OneClick
AC/POLO Offline
Junior Member
**
Posts: 16
Threads: 2
Joined: Jun 2013
Reputation: 0
#1
09-08-2013, 06:43 AM (This post was last modified: 09-08-2013, 06:44 AM by AC/POLO.)
Been tryng but I need help...* One-click Webstar flash utility *
(visit www.sbhacker.net for more inforamtion)

- Make sure that your current modem firmware is v202r1256-060303 or later
- Make sure that your firewall is off
- Enter your Windows Network Connection Name (none=default):
-
Access is denied.
The filename, directory name, or volume label syntax is incorrect.


The system cannot find the file tftpd32.exe.
The system cannot find the path specified.
The system cannot find the path specified.
'snmpd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmptrapd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpget' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.

- Wait until the TFTP Sent the Firmware (~17 seconds)
- Wait ~5 more seconds and reboot your modem
- Press enter to continue...
Find
Reply
Box3r Offline
^Knowledge is Power^
*****
Posts: 277
Threads: 32
Joined: Jun 2011
Reputation: 11
#2
09-08-2013, 08:31 AM
Looks Like You Dont Have SNMP Or Something Try This 1

http://www.mediafire.com/download/iapqee...kFlash.zip

Make sure u set your STATIC IP TO AS FOLLOWS

//Internet Protocol Version 6 Uncheck

Internet Protocol Version 4
192.168.100.10
255.255.255.0
192.168.100.1

Set This Before Trying To Use OCF<-
[Image: 263u88n.png]
[Image: n55wtw.png]
https://cable-wizardz.co.uk/user/1220-gr3atbox3r/
Find
Reply
AC/POLO Offline
Junior Member
**
Posts: 16
Threads: 2
Joined: Jun 2013
Reputation: 0
#3
09-08-2013, 06:00 PM
(09-08-2013, 08:31 AM)Box3r Wrote: Looks Like You Dont Have SNMP Or Something Try This 1

http://www.mediafire.com/download/iapqee...kFlash.zip

Make sure u set your STATIC IP TO AS FOLLOWS

//Internet Protocol Version 6 Uncheck

Internet Protocol Version 4
192.168.100.10
255.255.255.0
192.168.100.1

Set This Before Trying To Use OCF<-
Is it necessary that I put anything when it request Windows Network Connection Name???
Find
Reply
Box3r Offline
^Knowledge is Power^
*****
Posts: 277
Threads: 32
Joined: Jun 2011
Reputation: 11
#4
09-08-2013, 06:08 PM
ermm im not to sure ive never had a problem with it ....

i just press enter
[Image: 263u88n.png]
[Image: n55wtw.png]
https://cable-wizardz.co.uk/user/1220-gr3atbox3r/
Find
Reply
AC/POLO Offline
Junior Member
**
Posts: 16
Threads: 2
Joined: Jun 2013
Reputation: 0
#5
09-08-2013, 07:17 PM
Just checking to make certain before I try it, Thanx...
Find
Reply
AC/POLO Offline
Junior Member
**
Posts: 16
Threads: 2
Joined: Jun 2013
Reputation: 0
#6
10-08-2013, 02:00 AM (This post was last modified: 10-08-2013, 02:06 AM by AC/POLO.)
Here goes my latest situation
* One-click Webstar flash utility *
(visit www.sbhacker.net for more inforamtion)

- Make sure that your current modem firmware is v202r1256-060303 or later
- Make sure that your firewall is off
- Enter your Windows Network Connection Name (none=default):
-
Failed to configure the DHCP service. The interface may be disconnected.
The system cannot find the file specified.


The system cannot find the file tftpd32.exe.
The system cannot find the path specified.
The system cannot find the path specified.
'snmpd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmptrapd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpget' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.

- Wait until the TFTP Sent the Firmware (~17 seconds)
- Wait ~5 more seconds and reboot your modem
- Press enter to continue...
Sorry about last post forgot to turn off firewalls but this is what I got* One-click Webstar flash utility *
(visit www.sbhacker.net for more inforamtion)

- Make sure that your current modem firmware is v202r1256-060303 or later
- Make sure that your firewall is off
- Enter your Windows Network Connection Name (none=default):
-
The requested operation requires elevation (Run as administrator).

Error in packet.
Reason: notWritable (That object does not support modification)
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.1.2.1.2.1

SNMPv2-MIB:ConfusedysDescr.0 = STRING: Cisco DPC2100R2 DOCSIS 2.0 Cable Modem <<HW_REV
: 2.1; VENDOR: Cisco; BOOTR: 2.1.6d; SW_REV: dpc2100R2-v2.0.2r1256-110419as-COX;
MODEL: DPC2100R2>>
SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this
MIB View (It is past the end of the MIB tree)
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.1.0

Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.2.0

Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.3.0

Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.4.0

Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.5.0

Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.6.0

SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this
MIB View (It is past the end of the MIB tree)
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.6.0


- Wait until the TFTP Sent the Firmware (~17 seconds)
- Wait ~5 more seconds and reboot your modem
- Press enter to continue...
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#7
10-08-2013, 03:59 AM
downgrade your firmware http://www.haxorware.com/forums/thread-2...l#pid15813
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
AC/POLO Offline
Junior Member
**
Posts: 16
Threads: 2
Joined: Jun 2013
Reputation: 0
#8
10-08-2013, 02:20 PM
Still doing a little reading I'll let you know when it's completed...
Find
Reply
AC/POLO Offline
Junior Member
**
Posts: 16
Threads: 2
Joined: Jun 2013
Reputation: 0
#9
11-08-2013, 03:43 PM
Whenever I try to setup the tftpd32 I get tftpd msg cannot initialize dhcp serever, then recv error 10038...
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#10
11-08-2013, 04:02 PM
right click run as admin
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)