+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: OneClick (/showthread.php?tid=2709)
OneClick - AC/POLO - 09-08-2013
Been tryng but I need help...* One-click Webstar flash utility *
(visit www.sbhacker.net for more inforamtion)
- Make sure that your current modem firmware is v202r1256-060303 or later
- Make sure that your firewall is off
- Enter your Windows Network Connection Name (none=default):
-
Access is denied.
The filename, directory name, or volume label syntax is incorrect.
The system cannot find the file tftpd32.exe.
The system cannot find the path specified.
The system cannot find the path specified.
'snmpd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmptrapd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpget' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
- Wait until the TFTP Sent the Firmware (~17 seconds)
- Wait ~5 more seconds and reboot your modem
- Press enter to continue...
RE: OneClick - Box3r - 09-08-2013
Looks Like You Dont Have SNMP Or Something Try This 1
http://www.mediafire.com/download/iapqeec296ap2ta/OneClickFlash.zip
Make sure u set your STATIC IP TO AS FOLLOWS
//Internet Protocol Version 6 Uncheck
Internet Protocol Version 4
192.168.100.10
255.255.255.0
192.168.100.1
Set This Before Trying To Use OCF<-
RE: OneClick - AC/POLO - 09-08-2013
(09-08-2013, 08:31 AM)Box3r Wrote: Looks Like You Dont Have SNMP Or Something Try This 1Is it necessary that I put anything when it request Windows Network Connection Name???
http://www.mediafire.com/download/iapqeec296ap2ta/OneClickFlash.zip
Make sure u set your STATIC IP TO AS FOLLOWS
//Internet Protocol Version 6 Uncheck
Internet Protocol Version 4
192.168.100.10
255.255.255.0
192.168.100.1
Set This Before Trying To Use OCF<-
RE: OneClick - Box3r - 09-08-2013
ermm im not to sure ive never had a problem with it ....
i just press enter
RE: OneClick - AC/POLO - 09-08-2013
Just checking to make certain before I try it, Thanx...
RE: OneClick - AC/POLO - 10-08-2013
Here goes my latest situation
* One-click Webstar flash utility *
(visit www.sbhacker.net for more inforamtion)
- Make sure that your current modem firmware is v202r1256-060303 or later
- Make sure that your firewall is off
- Enter your Windows Network Connection Name (none=default):
-
Failed to configure the DHCP service. The interface may be disconnected.
The system cannot find the file specified.
The system cannot find the file tftpd32.exe.
The system cannot find the path specified.
The system cannot find the path specified.
'snmpd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmptrapd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpget' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
- Wait until the TFTP Sent the Firmware (~17 seconds)
- Wait ~5 more seconds and reboot your modem
- Press enter to continue...
Sorry about last post forgot to turn off firewalls but this is what I got* One-click Webstar flash utility *
(visit www.sbhacker.net for more inforamtion)
- Make sure that your current modem firmware is v202r1256-060303 or later
- Make sure that your firewall is off
- Enter your Windows Network Connection Name (none=default):
-
The requested operation requires elevation (Run as administrator).
Error in packet.
Reason: notWritable (That object does not support modification)
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.1.2.1.2.1
SNMPv2-MIB:
ysDescr.0 = STRING: Cisco DPC2100R2 DOCSIS 2.0 Cable Modem <<HW_REV: 2.1; VENDOR: Cisco; BOOTR: 2.1.6d; SW_REV: dpc2100R2-v2.0.2r1256-110419as-COX;
MODEL: DPC2100R2>>
SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this
MIB View (It is past the end of the MIB tree)
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.1.0
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.2.0
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.3.0
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.4.0
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.5.0
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.6.0
SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this
MIB View (It is past the end of the MIB tree)
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.6.0
- Wait until the TFTP Sent the Firmware (~17 seconds)
- Wait ~5 more seconds and reboot your modem
- Press enter to continue...
RE: OneClick - drewmerc - 10-08-2013
downgrade your firmware http://www.haxorware.com/forums/thread-2121-post-15813.html#pid15813
RE: OneClick - AC/POLO - 10-08-2013
Still doing a little reading I'll let you know when it's completed...
RE: OneClick - AC/POLO - 11-08-2013
Whenever I try to setup the tftpd32 I get tftpd msg cannot initialize dhcp serever, then recv error 10038...
RE: OneClick - drewmerc - 11-08-2013
right click run as admin