How to flash haxorware to sb5101 and dpc2100r2?

[conazo]

I'm new to this and would like to know how to flash haxorware 1.1 39 to sb5101 and dpc2100r2? any guides or step by step instruction will be appreciated. Thanks in advance
the tools i have is USB blackcat what other tools or programs i need?

[mohitomish]

for dpc2100r2 its easy to flash (wid ur ethernet) ,through 1 click flasher
for sb u hav to open it n use pjtag

[conazo]

for dpc2100r2 its easy to flash (wid ur ethernet) ,through 1 click flasher
for sb u hav to open it n use pjtag

ok, for the dpc2100r2 does it have to be a specific firmware? and for the sb5101 do i have to put in a 10 pin header?

[mohitomish]

firmware ver: v202r1256-060303

for sb ask some1 else

[conazo]

firmware ver: v202r1256-060303

for sb ask some1 else

ok thanks

---

anyone knows for the sb5101 do i have to put in a 10 pin header and what program do i use to flash the modem using a usb blackcat?

[kornwood]

firmware ver: v202r1256-060303

for sb ask some1 else

ok thanks

---

anyone knows for the sb5101 do i have to put in a 10 pin header and what program do i use to flash the modem using a usb blackcat?

YES
and its own software

[conazo]

[quote='mohitomish' pid='13528' dateline='1346268238']
firmware ver: v202r1256-060303

for sb ask some1 else

ok thanks

---

anyone knows for the sb5101 do i have to put in a 10 pin header and what program do i use to flash the modem using a usb blackcat?

YES
and its own software
[/quote
also is there a step by step instructions guide or tutorial on how to do this?

[mohitomish]

e are going to Flas the Webstar DPC2100R2 Without open it and only by Ethernet cable!!!!

First install The program net-snmp-5.4.2.1.win32
Make sure that the Firmware is called "haxorware.bin" Copy the Firmware that is in this folder or change the name
of your bin file for (haxorware.bin) And add to the TFTP Folder.

SET UP TCP/IP:
192.168.100.10
255.255.255.0
192.168.100.1

1. Open your TFTP server and be sure that the haxorware.bin is in the Folder:


This method work when is the Modem DPC2100R2 With the firmware ver: v202r1256-060303

Just open The DPC2100R2.bat File and follow the intructions is very easy When You see that the TFTP Server
Finish Sending the bin file wait 5 seconds and reboot the modem!!
And Enjoy Haxorware.


NOTE:
For this method work you need to install First net-snmp-5.4.2.1.win32 add in the folder
And that the TFTP is Ready to Sent the bin File called (haxorware.bin) add in the folder is the last version 11rev39

Thanks To sbhacker.

[conazo]

e are going to Flas the Webstar DPC2100R2 Without open it and only by Ethernet cable!!!!

First install The program net-snmp-5.4.2.1.win32
Make sure that the Firmware is called "haxorware.bin" Copy the Firmware that is in this folder or change the name
of your bin file for (haxorware.bin) And add to the TFTP Folder.

SET UP TCP/IP:
192.168.100.10
255.255.255.0
192.168.100.1

1. Open your TFTP server and be sure that the haxorware.bin is in the Folder:


This method work when is the Modem DPC2100R2 With the firmware ver: v202r1256-060303

Just open The DPC2100R2.bat File and follow the intructions is very easy When You see that the TFTP Server
Finish Sending the bin file wait 5 seconds and reboot the modem!!
And Enjoy Haxorware.


NOTE:
For this method work you need to install First net-snmp-5.4.2.1.win32 add in the folder
And that the TFTP is Ready to Sent the bin File called (haxorware.bin) add in the folder is the last version 11rev39

Thanks To sbhacker.

Thanks a lot for the info

[conazo]

Does anyone know if this firmware version works with ethernet cable one click method v2.0.2r1256-071128a-PCM ????