(29-08-2012, 08:10 PM)mohitomish Wrote: for dpc2100r2 its easy to flash (wid ur ethernet) ,through 1 click flasher
for sb u hav to open it n use pjtag

(29-08-2012, 08:23 PM)mohitomish Wrote: firmware ver: v202r1256-060303

for sb ask some1 else

(29-08-2012, 08:24 PM)conazo Wrote:

(29-08-2012, 08:23 PM)mohitomish Wrote: firmware ver: v202r1256-060303

for sb ask some1 else

ok thanks

---

anyone knows for the sb5101 do i have to put in a 10 pin header and what program do i use to flash the modem using a usb blackcat?

(29-08-2012, 08:34 PM)kornwood Wrote:

(29-08-2012, 08:24 PM)conazo Wrote: [quote='mohitomish' pid='13528' dateline='1346268238']
firmware ver: v202r1256-060303

for sb ask some1 else

ok thanks

---

anyone knows for the sb5101 do i have to put in a 10 pin header and what program do i use to flash the modem using a usb blackcat?

(29-08-2012, 08:39 PM)mohitomish Wrote: e are going to Flas the Webstar DPC2100R2 Without open it and only by Ethernet cable!!!!

First install The program net-snmp-5.4.2.1.win32
Make sure that the Firmware is called "haxorware.bin" Copy the Firmware that is in this folder or change the name
of your bin file for (haxorware.bin) And add to the TFTP Folder.

SET UP TCP/IP:
192.168.100.10
255.255.255.0
192.168.100.1

1. Open your TFTP server and be sure that the haxorware.bin is in the Folder:


This method work when is the Modem DPC2100R2 With the firmware ver: v202r1256-060303

Just open The DPC2100R2.bat File and follow the intructions is very easy When You see that the TFTP Server
Finish Sending the bin file wait 5 seconds and reboot the modem!!
And Enjoy Haxorware.


NOTE:
For this method work you need to install First net-snmp-5.4.2.1.win32 add in the folder
And that the TFTP is Ready to Sent the bin File called (haxorware.bin) add in the folder is the last version 11rev39

Thanks To sbhacker.