Posts: 20
Threads: 3
Joined: Jun 2012
Reputation:
0
This is what I get with the CM online and with Internet:
2012-07-27 22:12:32
Critical
I402.0
TLV-11 - Illegal Set operation failed
2012-07-27 22:12:00
Error
D004.3
ToD request sent- No Response received
2012-07-27 22:12:00
Critical
D002.0
DHCP FAILED - Request sent, No response
2012-07-27 22:11:44
Notice
M572.0
Rng Rsp Abort Status - Reinitialize MAC...
2012-07-27 22:11:44
Critical
R007.0
Unicast Ranging Received Abort Response - Re- initializing MAC
2012-07-27 22:10:11
Critical
R005.0
Started Unicast Maintenance Ranging - No Response received - T3 time-out
Posts: 1,516
Threads: 16
Joined: Dec 2009
Reputation:
79
28-07-2012, 01:37 PM
(This post was last modified: 28-07-2012, 01:50 PM by ABMJR.)
It gets booted because you cant seem to respond to unicast maintenance, which is used to keep all the CM's synced to the master (CMTS).. Offsets for timing are used and since all the CM's are using TDMA, this is where the "T" is critical, as each modem can only burst in its own allocated time slot. If the offset is too great, you will collide with other cm's and cause collisions. Seems your CMTS does this maintenance when more cm's are active. Maybe subscribers getting home and using their internet more, but for whatever reason, your modem isnt responding to T-3 requests and the CMTS is dropping you, most likely a DocsDevReset command sent. Dont have IGNORE any timeouts what so ever in the Haxorware GUI. No ticks
Started Unicast Maintenance Ranging - No Response received - T3 time-out
Since we use an access method known as TDMA and A-TDMA, read what TDMA means it based on Time Division Multiple Access. Again, Time is critical.
A simple analogy would be a large auditorium with a speaker at the podium (he will be the CMTS) He speaks and then audience members (the CM's) are all listening. If anyone wants to respond (ask a question/send a querie) it can only be done one at a time. If all the people in the audience stood up at once and began asking questions, the Podium (CMTS) would never hear anyone as they are all talking at the same time. This is where we use Unicast management. So, now, only one modem stands up and speaks and the podium (CMTS) hears that message.
Kapisch?
P.S
and the larger the audience (more subscribers with CM's) the more critical it is to keep everyone synced so no 2 or 3 or (X) cable modems (CM's) will ever querie at the same time and collide..Collisions which have HTTP headers are ACK and NACK and cause a re-transmit. Ironically, this shows up as a higher PING as the packet had to be retransmitted again. VOIP doesnt re-transmit, so any packet here is lost/collided and is generally seen by a drop or gap or stuttering on the other end..
Knowledge=Power
Posts: 129
Threads: 25
Joined: Mar 2012
Reputation:
5
Posts: 90
Threads: 1
Joined: Jul 2012
Reputation:
2
Free Lunch is Always Yummy. 
Posts: 20
Threads: 3
Joined: Jun 2012
Reputation:
0
29-07-2012, 04:34 AM
(This post was last modified: 29-07-2012, 04:36 AM by lefont.)
(28-07-2012, 01:37 PM)ABMJR Wrote: It gets booted because you cant seem to respond to unicast maintenance, which is used to keep all the CM's synced to the master (CMTS).. Offsets for timing are used and since all the CM's are using TDMA, this is where the "T" is critical, as each modem can only burst in its own allocated time slot. If the offset is too great, you will collide with other cm's and cause collisions. Seems your CMTS does this maintenance when more cm's are active. Maybe subscribers getting home and using their internet more, but for whatever reason, your modem isnt responding to T-3 requests and the CMTS is dropping you, most likely a DocsDevReset command sent. Dont have IGNORE any timeouts what so ever in the Haxorware GUI. No ticks
Started Unicast Maintenance Ranging - No Response received - T3 time-out
Since we use an access method known as TDMA and A-TDMA, read what TDMA means it based on Time Division Multiple Access. Again, Time is critical.
A simple analogy would be a large auditorium with a speaker at the podium (he will be the CMTS) He speaks and then audience members (the CM's) are all listening. If anyone wants to respond (ask a question/send a querie) it can only be done one at a time. If all the people in the audience stood up at once and began asking questions, the Podium (CMTS) would never hear anyone as they are all talking at the same time. This is where we use Unicast management. So, now, only one modem stands up and speaks and the podium (CMTS) hears that message.
Kapisch?
P.S
and the larger the audience (more subscribers with CM's) the more critical it is to keep everyone synced so no 2 or 3 or (X) cable modems (CM's) will ever querie at the same time and collide..Collisions which have HTTP headers are ACK and NACK and cause a re-transmit. Ironically, this shows up as a higher PING as the packet had to be retransmitted again. VOIP doesnt re-transmit, so any packet here is lost/collided and is generally seen by a drop or gap or stuttering on the other end..
I use to have the T2, T3, and T4 checked. But now there are not, and again the modems keeps doing it. Logs are viciously clear all the time, I dont think that alone will do anything. But again thats my thought. Speedtier mac I have, is able to connect and I'm able to browse, but will not last 5 minutes and the modem reboots.
Posts: 1,516
Threads: 16
Joined: Dec 2009
Reputation:
79
You changed the 1st NIC's MAC addy? Router or NIC card?
Knowledge=Power
Posts: 20
Threads: 3
Joined: Jun 2012
Reputation:
0
(29-07-2012, 04:37 AM)ABMJR Wrote: You changed the 1st NIC's MAC addy? Router or NIC card?
Yes, I change the mac of the nic and then clone the pc's mac on the router. Why?
Posts: 185
Threads: 3
Joined: Feb 2011
Reputation:
12
(29-07-2012, 05:26 AM)lefont Wrote: Yes, I change the mac of the nic and then clone the pc's mac on the router. Why?
Because that is what the ISP logs.. And if you didn't change it they would know it is you and make your modem reboot.
Posts: 20
Threads: 3
Joined: Jun 2012
Reputation:
0
(29-07-2012, 05:36 AM)SlowGrind6 Wrote: (29-07-2012, 05:26 AM)lefont Wrote: Yes, I change the mac of the nic and then clone the pc's mac on the router. Why?
Because that is what the ISP logs.. And if you didn't change it they would know it is you and make your modem reboot. Even doing that, the modem takes a while to get bank online. It will not go pass the receive light. But once it connects, after 2-3 hours of attempt, than any mac will connect with no problem. That is until the very next day around 5:00 pm or so.
Posts: 20
Threads: 3
Joined: Jun 2012
Reputation:
0
29-07-2012, 06:15 AM
(This post was last modified: 29-07-2012, 06:21 AM by lefont.)
(29-07-2012, 06:11 AM)Tropical Wrote: lol Your Crying About Not Having Internet For About 2-3 Hours.... Go Kiss A Girl, Hump A Tree, Watch Tv, Masturbate, Do Something.
Tropical, how did you do in Physics in school? You know I don't know much, but please keep your unproductive comments to yourself. I dont joke with anyone here nor do I offend anyone. I dont know you nor do you know me. If nothing fruitful to say, just simply watch from afar off. You have the tendency to engage is arguments and such, but just lend a hand if you can, that's all.
|
