15-01-2012, 06:35 AM
ok, finally got around to this again. could not get the 5101 to work with subbed 5100 flash, so i bought a 5100 and flashed it with the subbed 5100. NOW here comes the problems... i had it working fine, so i then added the haxoware firmware and now there seems to be a problem...
LibUsbDotNet version: 2.2.8.104
BlackcatUSB Script Engine running, build: 200
Welcome to BlackcatUSB interfacing software, build: 300
Running on: Microsoft Windows 7 Professional (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 7.01
JTAG engine setup successfully
Detected CPU ID: 0x334817F IMP CODE: 0x800908
Manufacturer ID: 0xBF Part ID: 0x3348
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading device specific script: SB5100_JTAG.bcs
Loading script: SB5100_JTAG.bcs
MemoryInit: Failed - device parameters failed Init
Setting device parameter (Intel Flash delay) to 0x64
Setting device parameter (AMD Flash delay) to 0xFA
Setting device parameter (Memory Read Delay) to 0x64
Error in script SB5100_JTAG.bcs on line 21
Reason: Error processing: CFGFLASH
Script file (SB5100_JTAG.bcs) unloaded
Disconnected from BlackcatUSB
Device connected in DFU bootloader mode
Sending AVR DFU erase command
AVR DFU command successful
Beginning AVR flash write (12898 bytes)
AVR flash written successfully
Disconnected from BlackcatUSB
Initializing EJTAG engine
Device connected in JTAG mode: 7.01
JTAG engine setup successfully
Detected CPU ID: 0x334817F IMP CODE: 0x800908
Manufacturer ID: 0xBF Part ID: 0x3348
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading device specific script: SB5100_JTAG.bcs
Loading script: SB5100_JTAG.bcs
MemoryInit: Failed - device parameters failed Init
Setting device parameter (Intel Flash delay) to 0x64
Setting device parameter (AMD Flash delay) to 0xFA
Setting device parameter (Memory Read Delay) to 0x64
Error in script SB5100_JTAG.bcs on line 21
Reason: Error processing: CFGFLASH
LibUsbDotNet version: 2.2.8.104
BlackcatUSB Script Engine running, build: 200
Welcome to BlackcatUSB interfacing software, build: 300
Running on: Microsoft Windows 7 Professional (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 7.01
JTAG engine setup successfully
Detected CPU ID: 0x334817F IMP CODE: 0x800908
Manufacturer ID: 0xBF Part ID: 0x3348
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading device specific script: SB5100_JTAG.bcs
Loading script: SB5100_JTAG.bcs
MemoryInit: Failed - device parameters failed Init
Setting device parameter (Intel Flash delay) to 0x64
Setting device parameter (AMD Flash delay) to 0xFA
Setting device parameter (Memory Read Delay) to 0x64
Error in script SB5100_JTAG.bcs on line 21
Reason: Error processing: CFGFLASH
Script file (SB5100_JTAG.bcs) unloaded
Disconnected from BlackcatUSB
Device connected in DFU bootloader mode
Sending AVR DFU erase command
AVR DFU command successful
Beginning AVR flash write (12898 bytes)
AVR flash written successfully
Disconnected from BlackcatUSB
Initializing EJTAG engine
Device connected in JTAG mode: 7.01
JTAG engine setup successfully
Detected CPU ID: 0x334817F IMP CODE: 0x800908
Manufacturer ID: 0xBF Part ID: 0x3348
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading device specific script: SB5100_JTAG.bcs
Loading script: SB5100_JTAG.bcs
MemoryInit: Failed - device parameters failed Init
Setting device parameter (Intel Flash delay) to 0x64
Setting device parameter (AMD Flash delay) to 0xFA
Setting device parameter (Memory Read Delay) to 0x64
Error in script SB5100_JTAG.bcs on line 21
Reason: Error processing: CFGFLASH