15-04-2015, 04:18 PM
(This post was last modified: 15-04-2015, 04:22 PM by newprogram.)
(15-04-2015, 04:06 PM)drewmerc Wrote: stop forcing your modded config and take the one served by the tftp and see what your speed is
as in both the above logs your using/forcing the same config
I delete haxorware config file and custom file from file manager,"Disable Firmware Upgrades" and "Force Network Access" is turn on,but
the speed still save 512KB and 2.7MB,below is telnet log,
Code:
Haxorware integrated telnet daemon
Username: root
Password: **********
Welcome.
CM>
CM> run_app
Running the system...
BcmCmDocsisStatusEventCodes::kCmIsNotOperational
CamDeleteAddress: Deleted address from cam segment 0
CM> Non-Vol Settings successfully written to the device.
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
mot_scanList: Setting override freq @ 7000000
Scanning DS Channel at 7000000 Hz... (Initial target freq)
mot_scanList: Setting override freq @ 0
Favorite[1].freq = 603000000
Attempting Downstream FEC lock @ freq= 603000000 Hz, QAM64/256
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 603000000 Hz
Carrier Offset = -2 Hz
Symbol rate = 5360537 sym/sec
SNR = 35 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x16267eb8
Power Level = 0 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM> Selecting UCD for Us Channel 1
RNG-RSP Adj: tim=2707 power=74 freq=0 Stat=Continue
Non-Vol Settings successfully written to the device.
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
Selecting UCD for Us Channel 3
RNG-RSP Adj: tim=2707 power=24 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 33000000 Hz
Upstream Power = 39 dBmV
Ranging SID = 0x2fb
Upstream Symbol Rate = 2560000 sym/sec
******************************************
Starting IP Initialization with DHCP...
CM> ARPing for default GW IP = 192.168.176.1
MAC = 64:00:f1:3f:4d:d9
DHCP completed successfully!
DHCP: IP address = 192.168.176.23
Starting Time Of Day...
Current system time -> Wed Apr 15 17:30:40 2015
System start time -> Wed Apr 15 17:26:16 2015
Starting Tftp of configuration file...
Resuming SNMP Thread
tftp-enforce bypass is DISABLED
Storing received cfg of size 148 to memory
Time Of Day completed...
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.
mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
Suspending SNMP Thread
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
Scanning DS Channel at 621000000 Hz...
Found carrier at 621000000 Hz!
Signal quality = 34.8 dB SNR
Selecting UCD for Us Channel 3
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
Enabling network access for all CPE ports.
mot_scanList: Writing to Flash!Is this problem from BPI?[/code]I do not have cert file
when i turn on Tftp Enforce Bypass,BPI initialization completed
Code:
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.when i turn off Tftp Enforce Bypass,log show:
Code:
Non-Vol Settings successfully written to the device.
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17