new but doing a pretty good job...i think? fully operational on sb5101 but....

[KnoxK]

when I run telnet non-vol it shows my keys and certs but I noticed on the bottom I see Shadow bpi then it has sb5100 2.4.4 I know that's the firmware but is that from the clone its from ill print log

---

otorola Dynamic NonVol Settings:

cmFreqPlanType = 0
cmDhcpServerEnable = 1
cmCfgConcatEnabled = 1
cmDocsis20Capable = 1
cmAnnexMode = 0
cmBabbleControl = 0
cmConfigFreq1 = 699000000 Hz (shadowed from DOCSIS, DsFreq)
cmConfigFreq2 = 813000000 Hz
cmConfigFreq3 = 387000000 Hz
cmUpstreamChannelId1 = 19 (shadowed from DOCSIS, UsChan)
cmUpstreamChannelId2 = 2
cmUpstreamChannelId3 = 1
cmUpstreamPower1 = 50.50 dBmV (shadowed from DOCSIS, UsPower)
cmUpstreamPower2 = 53.50 dBmV
cmUpstreamPower3 = 16.50 dBmV

cmFactoryCodeSigningTime = (shadowed from BPI, Code Access Start)
30 32 30 32 30 38 30 30 30 30 30 30 | 020208000000

cmFactoryCVCValidityStartTime = (shadowed from BPI, CVC Access Start)
30 31 30 37 31 31 30 30 30 30 30 30 | 010711000000

cmFactorySwServer = 69.252.208.77 (shadowed from SNMP, docsDevSwServer)
cmFactorySwFilename = SB5100-2.3.8.0-GA-00-NOSH-NNDMN.p7.csg (shadowed from SNMP, docsDevSwFilename)
cmStandbyMode = 0
cmStandbyCapable = 1
cmSunboxCapable = 0
cmDhcpUnicastTrafficOnly = 0
cmConfigGuiHfcAccessEnable = 0
cmConfigEnableAllEventLogPriorities = 0
cmConfigT3TimeoutInitRngRetries = 
fCmFreqCustomListEntries = 5
fCmDocsis1xHackFor20CmtsEnable = 0
fDocsDevSTPControl = 
fCmClearUpstreamFavChanID = 0

Extra Dynamic Settings data (stored because of downgrade):

00 00 00 00 01 00 0a 00 00 | .........


+--------------------------------------+
| |
| VendorSecureFactoryMibNonVolSettings
+--------------------------------------+
Magic Number = 0x464d6962 'FMib'
Version (Permanent) = 0.1
Version (Dynamic) = 0.1
Is Default (Permanent) = 0
Is Default (Dynamic) = 0
Is Manufactured (Permanent) = 1
Is Manufactured (Dynamic) = 1

Vendor NonVol Settings:

FmibTimerCounter = 0
FmibUserLevel = 1


+------------------------------------+
| |
| Unrecognized NonVol Settings Group
+------------------------------------+
Magic Number = 0x5253544c 'RSTL'
Version (Permanent) = 0.0
Version (Dynamic) = 0.1
Is Default (Permanent) = 1
Is Default (Dynamic) = 0
Is Manufactured (Permanent) = 1
Is Manufactured (Dynamic) = 1

Extra Dynamic Settings data (stored because of downgrade):
00 00 | ..


+------------------------------------+
| |
| Unrecognized NonVol Settings Group
+------------------------------------+
Magic Number = 0xd0c20300 '....'
Version (Permanent) = 0.0
Version (Dynamic) = 0.4
Is Default (Permanent) = 1
Is Default (Dynamic) = 0
Is Manufactured (Permanent) = 1
Is Manufactured (Dynamic) = 1

Extra Dynamic Settings data (stored because of downgrade):
00 00 00 02 40 00 00 | ....@..


and as you know I have a sb5101 other lines above that specify a factory mac can that be used