Here is my telnet logs. It may helps...
I understand it's failed while getting dynamic config file. Because it cannot find the same named config file on TFTP server. So, is there any way to connect again?
Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.10.15 17:26:28 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon
Username: root
Password: *****
Welcome.
CM>
CM> run
CM>
CM> run_app
Running the system...
Beginning Cable Modem operation...
0x00004290 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 0
Favorite[0].freq = 537000000
Attempting Downstream FEC lock @ freq= 537000000 Hz, QAM64/256
CM> Found energy at frequency 537000000Hz! Publishing event kEventEnergyDetected...
0x000044de [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 537000000 Hz
Carrier Offset = 4 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x15a3ab02
Power Level = -3 dB
QAM = LOCKED
FEC = LOCKED
******************************************
0x00004588 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RxMsgEvent: (CmDocsisCtlThread) WARNING - iteration limit reached. giving up control...
CM> Selecting UCD for Us Channel 6
0x00004ce0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x00004f7e [CmDocsisCtlThread] BcmCmDocsisCtlThread::RxMsgEvent: (CmDocsisCtlThread) WARNING - iteration limit reached. giving up control...
0x00004f9c [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x00004f9c [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 44.0 dBmV
0x00004f9c [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
CM>
RNG-RSP Adj: tim=2325 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 6
Upstream Frequency = 37200000 Hz
Upstream Power = 44 dBmV
Ranging SID = 0xac
Upstream Symbol Rate = 2560000 sym/sec
******************************************
Calculating maximum number of IP filters:
Each IP filter consumes 1848 bytes of RAM.
Current free RAM is 478300 bytes.
Max heap reserved for IP filters (25%) = 119575
We can support 64 IP filters.
Calculating maximum number of LLC filters:
Each LLC filter consumes 732 bytes of RAM.
Current free RAM is 478280 bytes.
Max heap reserved for LLC filters (25%) = 119570
We can support 163 LLC filters.
Starting IP Initialization with DHCP...
DHCPc: Waiting 3 seconds before sending Discover; client id htype=1, value=00:1e:46:ae:13:ca
Not logging event ID 2307948624, control for level 7 is 0.
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:1e:46:ae:13:ca
DHCPc: Received an Offer from DHCP server 44:d3:ca:27:83:d9 (10.6.0.1); lease client id htype=1, value=00:1e:46:ae:13:ca
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:1e:46:ae:13:ca
DHCPc: Sending Request packet; client id htype=1, value=00:1e:46:ae:13:ca
DHCPc: Received an Ack from DHCP server 44:d3:ca:27:83:d9 (10.6.0.1); lease client id htype=1, value=00:1e:46:ae:13:ca
Current IP address is default 0.0.0.0.
0x00007634 [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.6.5.90 (primary IP address)
Subnet Mask = 255.255.0.0
Router = 10.6.0.1
IsPrimaryInterface = 1
Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP = 10.6.0.1
MAC = 44:d3:ca:27:83:d9
DHCP completed successfully!
DHCP Settings:
Client Id = htype=1, value=00:1e:46:ae:13:ca
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x159038a2
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 44:d3:ca:27:83:d9
Ignore NAKs = 0
My offered IP address = 10.6.5.90 (primary IP address)
(1) Subnet Mask = 255.255.0.0
(3) Router IP address = 10.6.0.1
(54) DHCP Server IP address = 176.240.92.205
(82) Relay Agent IP address = 10.6.0.1
TFTP Server IP address = 10.6.0.1
CM Configuration file = '873254k'
(2) UTC Time Offset = 1 seconds
(4) Time Server IP address = 176.240.92.201
(6) Domain Name Server =
(7) Log Server IP address =
(51) Lease time = 604729 seconds
(58) T1 (renew) = 302364 seconds
(59) T2 (rebind) = 529137 seconds
Lease is infinite = 0
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.6.5.90, Subnet=255.255.0.0, Gateway=10.6.0.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.6.5.90
Starting Time Of Day...
0x000076ca [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 176.240.92.201
Connecting to ToD server 176.240.92.201...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.6.5.90:161
Not logging event ID 2291949724, control for level 7 is 0.
CM> UTC returned by ToD server 3559300027; UTC offset 1
Current system time -> Mon Oct 15 14:27:08 2012
System start time -> Mon Oct 15 14:26:38 2012
Starting Tftp of configuration file...
Opening file '873254k' on 10.6.0.1 for reading...
tftp-enforce bypass is using 10.6.0.1:873254k
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass failed.Error Unknown
Forcing Config TFTP IP to 176.240.92.201
Forcing Config File name to 20480.cm
Storing received cfg of size 210 to memory
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 10.6.0.1
Server Port Number = 48528
Total Blocks Read = 1
Total Bytes Read = 210
Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.4.1 -> public
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.5.1 -> 3 (i32)
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.7.1 -> 4 (i32)
TLV-11[4]: 1.3.6.1.4.1.4491.2.1.20.1.16.1.7.0 -> 1 (i32) UNKNOWN, ignoring.
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.6.5.90:161
4 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Logging event: TLV-11 - unrecognized OID
Received a REG-RSP message from the CMTS...
MAC MGT msg buf, len=23
00 1e 46 ae 13 ca 44 d3 ca 27 83 74 00 09 00 00 | ..F...D..'.t....
03 01 07 00 00 ac 0b | .......
MAC MGT header:
dest addr: 00:1e:46:ae:13:ca
src addr: 44:d3:ca:27:83:74
msg len: 0x9 (9)
DSAP: 0
SSAP: 0
control: 0x3
version: 0x1
msg_type: 0x7 REG_RSP
fka reserved: 0
MSG PDU:
primary sid: 0xac
response code: 0xb (kRejAuthFailureBadHmac)
0x000078d2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ParseAndValidateRegRspMsg: (CmDocsisCtlThread) ERROR - REG-RSP parse error. continuing.
0x000078d2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) ERROR -
REG-RSP response code NOT ok! rsp code = 11 (kRejAuthFailureBadHmac)
0x000078d2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 17 (kNegOrBadRegRsp)
Logging event: REG-RSP - invalid format or not recognized
Not logging event ID 2436694040, control for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0xac
0x0000799a [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc: Releasing the lease with client id htype=1, value=00:1e:46:ae:13:ca
DHCPc: Sending Release packet; client id htype=1, value=00:1e:46:ae:13:ca
0x000079a4 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket: (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x000079a4 [DHCP Client Thread] BcmDhcpClientIf::SendRelease: (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet! Oh, well, no biggie...
0x000079a4 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.6.5.90 from IP stack 1
0x000079ae [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x000079ae [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0, Gateway=0.0.0.0
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x00007aa8 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x00007aa8 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x00007abc [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 537000000
Scanning DS Channel at 537000000 Hz... (Initial target freq)
CM> Found energy at frequency 537000000Hz! Publishing event kEventEnergyDetected...
0x00007d0a [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 537000000 Hz
Carrier Offset = 3 Hz
Symbol rate = 5360537 sym/sec
SNR = 35 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x15968f9d
Power Level = -2 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM> Selecting UCD for Us Channel 6
0x00008b38 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x00008dd6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RxMsgEvent: (CmDocsisCtlThread) WARNING - iteration limit reached. giving up control...
0x00008df4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x00008df4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 44.0 dBmV
0x00008df4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
CM>
RNG-RSP Adj: tim=2340 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 6
Upstream Frequency = 37200000 Hz
Upstream Power = 44 dBmV
Ranging SID = 0xac
Upstream Symbol Rate = 2560000 sym/sec
******************************************
Starting IP Initialization with DHCP...
DHCPc: Waiting 3 seconds before sending Discover; client id htype=1, value=00:1e:46:ae:13:ca
Not logging event ID 2307948624, control for level 7 is 0.
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:1e:46:ae:13:ca
DHCPc: Received an Offer from DHCP server 44:d3:ca:27:83:d9 (10.6.0.1); lease client id htype=1, value=00:1e:46:ae:13:ca
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:1e:46:ae:13:ca
DHCPc: Sending Request packet; client id htype=1, value=00:1e:46:ae:13:ca
DHCPc: Received an Ack from DHCP server 44:d3:ca:27:83:d9 (10.6.0.1); lease client id htype=1, value=00:1e:46:ae:13:ca
Current IP address is default 0.0.0.0.
0x0000b298 [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.6.5.90 (primary IP address)
Subnet Mask = 255.255.0.0
Router = 10.6.0.1
IsPrimaryInterface = 1
Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP = 10.6.0.1
MAC = 44:d3:ca:27:83:d9
DHCP completed successfully!
DHCP Settings:
Client Id = htype=1, value=00:1e:46:ae:13:ca
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x159038a4
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 44:d3:ca:27:83:d9
Ignore NAKs = 0
My offered IP address = 10.6.5.90 (primary IP address)
(1) Subnet Mask = 255.255.0.0
(3) Router IP address = 10.6.0.1
(54) DHCP Server IP address = 176.240.92.205
(82) Relay Agent IP address = 10.6.0.1
TFTP Server IP address = 10.6.0.1
CM Configuration file = '3254k;f'
(2) UTC Time Offset = 1 seconds
(4) Time Server IP address = 176.240.92.201
(6) Domain Name Server =
(7) Log Server IP address =
(51) Lease time = 604713 seconds
(58) T1 (renew) = 302356 seconds
(59) T2 (rebind) = 529123 seconds
Lease is infinite = 0
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.6.5.90, Subnet=255.255.0.0, Gateway=10.6.0.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.6.5.90
Starting Time Of Day...
0x0000b324 [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 176.240.92.201
Connecting to ToD server 176.240.92.201...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.6.5.90:161
Not logging event ID 2291949724, control for level 7 is 0.
UTC returned by ToD server 3559300042; UTC offset 1
Current system time -> Mon Oct 15 14:27:23 2012
System start time -> Mon Oct 15 14:26:37 2012
Starting Tftp of configuration file...
Opening file '3254k;f' on 10.6.0.1 for reading...
tftp-enforce bypass is using 10.6.0.1:3254k;f
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass failed.Error Unknown
Forcing Config TFTP IP to 176.240.92.201
Forcing Config File name to 20480.cm
Storing received cfg of size 210 to memory
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 10.6.0.1
Server Port Number = 47039
Total Blocks Read = 1
Total Bytes Read = 210
Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.4.1 -> public
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.5.1 -> 3 (i32)
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.7.1 -> 4 (i32)
TLV-11[4]: 1.3.6.1.4.1.4491.2.1.20.1.16.1.7.0 -> 1 (i32) UNKNOWN, ignoring.
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.6.5.90:161
4 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Logging event: TLV-11 - unrecognized OID
Received a REG-RSP message from the CMTS...
MAC MGT msg buf, len=23
00 1e 46 ae 13 ca 44 d3 ca 27 83 74 00 09 00 00 | ..F...D..'.t....
03 01 07 00 00 ac 0b | .......
MAC MGT header:
dest addr: 00:1e:46:ae:13:ca
src addr: 44:d3:ca:27:83:74
msg len: 0x9 (9)
DSAP: 0
SSAP: 0
control: 0x3
version: 0x1
msg_type: 0x7 REG_RSP
fka reserved: 0
MSG PDU:
primary sid: 0xac
response code: 0xb (kRejAuthFailureBadHmac)
0x0000b536 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ParseAndValidateRegRspMsg: (CmDocsisCtlThread) ERROR - REG-RSP parse error. continuing.
0x0000b536 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) ERROR -
REG-RSP response code NOT ok! rsp code = 11 (kRejAuthFailureBadHmac)
0x0000b536 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 17 (kNegOrBadRegRsp)
Logging event: REG-RSP - invalid format or not recognized
Not logging event ID 2436694040, control for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0xac
0x0000b608 [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc: Releasing the lease with client id htype=1, value=00:1e:46:ae:13:ca
DHCPc: Sending Release packet; client id htype=1, value=00:1e:46:ae:13:ca
0x0000b612 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket: (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x0000b612 [DHCP Client Thread] BcmDhcpClientIf::SendRelease: (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet! Oh, well, no biggie...
0x0000b612 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.6.5.90 from IP stack 1
0x0000b61c [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x0000b61c [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0, Gateway=0.0.0.0
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x0000b716 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x0000b716 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
NonVolDeviceDriver::NonVolDriverWrite: WARNING - Current segment size < buffer size! Increasing the segment size!
0x0000b72a [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 0
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 501000000 Hz, QAM64
Found energy at frequency 501000000Hz! Publishing event kEventEnergyDetected...
Attempting Downstream FEC lock @ freq= 507000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 513000000 Hz, QAM64
CM> Attempting Downstream FEC lock @ freq= 519000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 525000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 531000000 Hz, QAM64
...
...I understand it's failed while getting dynamic config file. Because it cannot find the same named config file on TFTP server. So, is there any way to connect again?