Can't Connect with Random Config

Can't Connect with Random Config - Printable Version

+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: Can't Connect with Random Config (/showthread.php?tid=2050)

Pages: 1 2

Can't Connect with Random Config - deathroll - 14-10-2012

Hi there!

My ISP made some improvements. Now, my ISP is using randomly generated config filenames. I'm trying to connect with using TFTP enforce bypass and autoserving config file. My modem can't be operational with my recent config file. I encounter "Neg Or Bad Reg Rsp - Reinitialize MAC..." error. How can I connect again? Any help would be awesome.

RE: Can't Connect with Random Config - Box3r - 14-10-2012

Ermm Would Be Worth A Shot Of Using ' An Old List Of Macs Mate '

RE: Can't Connect with Random Config - haroldstein - 14-10-2012

If you guys would read previous threads first, you would know
that just about every ISP has gone to the new Security.

RE: Can't Connect with Random Config - Box3r - 14-10-2012

how do i find out if my ISP has new security ?

RE: Can't Connect with Random Config - haroldstein - 14-10-2012

Post a Telnet Log here!

RE: Can't Connect with Random Config - Box3r - 14-10-2012

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.10.14 19:45:46 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon

Username: box3r
Password: ***** ******
Welcome.

CM>
CM> run_apprun_app
CM>
CM> run_app

Running the system...

Beginning Cable Modem operation...

BcmCmDocsisStatusEventCodes::kCmIsNotOperational
0x00029edc [CmDocsisCtlThread] BcmVendorCmApplication::StartDhcpServer: (VendorExtension CmApp) Starting DHCP Server!
0x00029edc [IGMP Thread] BcmIgmpThread::Stopping Igmp Thread...: (IGMP Thread)
CamDeleteAddress: Deleted address from cam segment 0
0x00029ee6 [CmBpiManagerThd] BcmDocsisCmHalIf::SelectActiveBpiKey: (DOCSIS CableModem HalIf) WARNING - BPI is now disabled!

CM> Deleting DOCSIS 1.0 CoS Settings for SID 0x1434
0x00029fa4 [CmDocsisCtlThread] BcmDocsisCmHalIf: Big Grin

eleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc: Releasing the lease with client id htype=1, value=00:08:0e:5d:72:4c
DHCPc: Sending Release packet; client id htype=1, value=00:08:0e:5d:72:4c
0x00029fb8 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket: (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x00029fb8 [DHCP Client Thread] BcmDhcpClientIf::SendRelease: (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet! Oh, well, no biggie...
0x00029fb8 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.228.43.176 from IP stack 1
0x00029fc2 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x00029fc2 [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0, Gateway=0.0.0.0
SB5102 CM Agent w/ BRCM Factory Support disabling management.
SB5102 CM Agent w/ BRCM Factory Support defering traps.
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x0002a0b2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x0002a0bc [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x0002a0d0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncStop: (CmDocsisCtlThread)

*
* Locking off-frequency so that we don't receive any
* messages or data. Ignore the scan messages that follow...
*

0x0002a0d0 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 7000000
Scanning DS Channel at 7000000 Hz... (Initial target freq)
0x0002a0d0 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Favorite[1].freq = 339000000
Attempting Downstream FEC lock @ freq= 339000000 Hz, QAM64/256

CM> Found energy at frequency 339000000Hz! Publishing event kEventEnergyDetected...
Favorite[2].freq = 402750000
Attempting Downstream FEC lock @ freq= 402750000 Hz, QAM64/256
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 90000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 98000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 106000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 114000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 122000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 130000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 138000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 146000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 154000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 162000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 170000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 178000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 186000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 194000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 202000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 210000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 218000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 226000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 234000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 242000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 250000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 258000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 266000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 274000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 282000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 290000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 298000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 306000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 314000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 322000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 330000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 338000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 346000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 354000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 362000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 370000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 378000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 386000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 394000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 402000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 410000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 418000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 426000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 434000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 442000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 450000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 458000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 466000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 474000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 482000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 490000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 498000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 506000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 514000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 522000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 530000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 538000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 546000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 554000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 562000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 570000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 578000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 586000000 Hz, QAM64
Favorite[0].freq = 331000000
Attempting Downstream FEC lock @ freq= 331000000 Hz, QAM64/256
0x00033fae [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 331000000 Hz
Carrier Offset = -13 Hz
Symbol rate = 5360537 sym/sec
SNR = 39 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x12fecdd2
Power Level = 8 dB
QAM = LOCKED
FEC = LOCKED
******************************************

CM> Selecting UCD for Us Channel 1

0x000352e6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x00035566 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x00035566 [CmDocsisCtlThread] BcmCmDocsisCtlThread: Big Grin

sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 36.0 dBmV
0x00035570 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.

CM>
RNG-RSP Adj: tim=2891 power=0 freq=0 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 1
Upstream Frequency = 18800000 Hz
Upstream Power = 36 dBmV
Ranging SID = 0x1434
Upstream Symbol Rate = 2560000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc: Waiting 2 seconds before sending Discover; client id htype=1, value=00:08:0e:5d:72:4c
Not logging event ID 2307948624, control for level 7 is 0.

CM> DHCPc: Sending Discover packet; client id htype=1, value=00:08:0e:5d:72:4c
DHCPc: Received an Offer from DHCP server 00:09:7b:8f:5c:01 (10.4.64.1); lease client id htype=1, value=00:08:0e:5d:72:4c

CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:08:0e:5d:72:4c
DHCPc: Sending Request packet; client id htype=1, value=00:08:0e:5d:72:4c
DHCPc: Received an Ack from DHCP server 00:09:7b:8f:5c:01 (10.4.64.1); lease client id htype=1, value=00:08:0e:5d:72:4c
Current IP address is default 0.0.0.0.
0x00036b78 [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.228.43.176 (primary IP address)
Subnet Mask = 255.255.248.0
Router = 10.228.40.1
IsPrimaryInterface = 1

Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP = 10.228.40.1
MAC = 00:09:7b:8f:5c:01
DHCP completed successfully!

DHCP Settings:
Client Id = htype=1, value=00:08:0e:5d:72:4c
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x67ba7dd
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:09:7b:8f:5c:01
Ignore NAKs = 0
My offered IP address = 10.228.43.176 (primary IP address)
(1) Subnet Mask = 255.255.248.0
(3) Router IP address = 10.228.40.1
(54) DHCP Server IP address = 62.253.131.172
(82) Relay Agent IP address = 10.4.64.1
TFTP Server IP address = 10.228.40.1
CM Configuration file = 'wrkldJKDHSUBsgvca698'
(2) UTC Time Offset = 0 seconds
(4) Time Server IP address = 10.137.103.1
(6) Domain Name Server =
(7) Log Server IP address =
(51) Lease time = 487951 seconds
(58) T1 (renew) = 243975 seconds
(59) T2 (rebind) = 426957 seconds
Lease is infinite = 0

SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.228.43.176, Subnet=255.255.248.0, Gateway=10.228.40.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.228.43.176
Starting Time Of Day...
0x00036c0e [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 10.137.103.1
Connecting to ToD server 10.137.103.1...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.228.43.176:225
Not logging event ID 2291949724, control for level 7 is 0.

CM> UTC returned by ToD server 3559229209; UTC offset 0
Current system time -> Sun Oct 14 18:46:49 2012

System start time -> Sun Oct 14 18:43:05 2012

Starting Tftp of configuration file...
Opening file 'wrkldJKDHSUBsgvca698' on 10.228.40.1 for reading...
tftp-enforce bypass is using 10.228.40.1:wrkldJKDHSUBsgvca698
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass succeeded.File was 428 bytes
Storing received cfg of size 428 to memory
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 10.228.40.1
Server Port Number = 69
Total Blocks Read = 1
Total Bytes Read = 428

Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.1 -> 255.255.255.255
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.1 -> 255.255.255.255
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.1 -> woofread
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.1 -> 2 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.1 -> @
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.1 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.2 -> 255.255.255.255
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.2 -> 255.255.255.255
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.2 -> woofreadwrite
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.2 -> 3 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.2 -> @
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.2 -> 4 (i32)
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.228.43.176:225
12 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x00036ef2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.0 config file!
Adding DOCSIS 1.0 CoS Settings for SID 0x1434

Class Of Service Settings:
SID = 0x1434
Max Us Burst = 1600 bytes
Max Us Rate = 1034000 bits per second
Max Bucket size = 24288 bits
Bits In Bucket = 24288
Last Bucket Update Time = 226011 ms
Last Bucket Flush Time = 226011 ms
Packet Delay Time = 0 ms

Global CONCAT has been enabled for all upstream queues.
The CONCAT threshold is set to 2 packets (128 packets max).
Fragmentation is ENABLED in DOCSIS 1.0 mode!
Registration complete!
Process CVC
0x00036f06 [CmDocsisCtlThread] CmSecureDownload: Tongue

rocessConfigFileManufAndCosignerCvcs: (Secure Software Download) WARNING - No CVC included in config file; software upgrade can't be performed!
0x00036f06 [CmDocsisCtlThread] BcmCmDocsisCtlThread: Tongue

rocessCVC: (CmDocsisCtlThread) ERROR - Config file does not include a valid CVC!
DOCSIS CoS/QoS rate shaping enable is now 1
CmSnmpAgent::CmOperationalEvent for SB5102 CM Agent w/ BRCM Factory Support
CmSnmpAgent operating in 1.0 mode, including docsBpi, excluding docsQos
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
SB5102 CM Agent w/ BRCM Factory Support enabling management.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
0x00036f10 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM enabled. starting BPKM key requests.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
Not logging event ID 66040100, control for level 7 is 0.
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
0x00037078 [CmDocsisCtlThread] BcmDocsisCmHalIf::ConfigOperational: (DOCSIS CableModem HalIf) Running IGMP in DOCSIS 1.0 mode!
BcmCmDocsisStatusEventCodes::kCmIsOperational
0x00037078 [CmDocsisCtlThread] BcmVendorCmApplication::StopDhcpServer: (VendorExtension CmApp) Shutting down DHCP Server...
0x00037078 [CmDocsisCtlThread] BcmStandbySwitchThread::CmIsOperational: (Motorola Standby Switch Thread) Simulating a press of the standby switch to get the state configured properly.
0x00037082 [IGMP Thread] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
0x00037082 [Motorola Standby Switch Thread] BcmStandbySwitchThread::ThreadMain: (Motorola Standby Switch Thread) Standby switch was pressed!
0x00037082 [Motorola Standby Switch Thread] BcmStandbySwitchThread: Tongue

rocessSwitchEvent: (Motorola Standby Switch Thread) Standby switch disabled in nonvol; ignoring event.
Not logging event ID 2296948624, control for level 7 is 0.

CM>

RE: Can't Connect with Random Config - ABMJR - 14-10-2012

Quote:0x00036f06 [CmDocsisCtlThread] CmSecureDownload:rocessConfigFileManufAndCosignerCvcs: (Secure Software Download) WARNING - No CVC included in config file; software upgrade can't be performed!
0x00036f06 [CmDocsisCtlThread] BcmCmDocsisCtlThread:rocessCVC: (CmDocsisCtlThread) ERROR - Config file does not include a valid CVC!

BPI + enforced...

I could fix this in 3 steps...

But, I dont work here and I keep things "tight"

RE: Can't Connect with Random Config - drewmerc - 14-10-2012

Quote:Initiating fake TFTP Get (tftp-enforce bypass)

can i ban everybody that posts a log with this in it?

RE: Can't Connect with Random Config - ABMJR - 14-10-2012

Sure...

Its as if they are still in 2009

RE: Can't Connect with Random Config - haroldstein - 15-10-2012

(14-10-2012, 09:04 PM)ABMJR Wrote:
Quote:0x00036f06 [CmDocsisCtlThread] CmSecureDownload:rocessConfigFileManufAndCosignerCvcs: (Secure Software Download) WARNING - No CVC included in config file; software upgrade can't be performed!
0x00036f06 [CmDocsisCtlThread] BcmCmDocsisCtlThread:rocessCVC: (CmDocsisCtlThread) ERROR - Config file does not include a valid CVC!

BPI + enforced...

I could fix this in 3 steps...

But, I dont work here and I keep things "tight"

With TELNET correct?