Last night Edison shut off our entire blocks power (50+ houses) to do emergency pole maintenance. This morning when I woke up I could no longer get online. Previously I was able to get online with BPI 1.0 and no need for certs just using the stealth settings from my cisco modem.
With Bpi Bypass
------------------------------
Time Priority Code Description
2012-05-17 16:36:27 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:16 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:33:54 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
2012-05-17 16:33:24 Notice M573.0 Modem Is Shutting Down and Rebooting...
With Bpi 1.0
----------------------------------
2012-05-17 16:40:01 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:40:01 Critical I001.0 REG-RSP - invalid format or not recognized
2012-05-17 16:39:56 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:39:44 Critical R002.0 No Ranging Response received - T3 time-out (US 3)
2012-05-17 16:39:40 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:39:40 Critical I001.0 REG-RSP - invalid format or not recognized
2012-05-17 16:39:35 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:39:26 Critical R002.0 No Ranging Response received - T3 time-out (US 3)
2012-05-17 16:39:21 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:39:21 Critical I001.0 REG-RSP - invalid format or not recognized
2012-05-17 16:39:16 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:39:05 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:39:05 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:11 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:06 Notice M571.1 Ethernet link up - ready to pass packets
2012-05-17 16:38:41 Notice M573.0 Modem Is Shutting Down and Rebooting...
With Bpi+
------------------------------------
2012-05-17 16:47:24 Error B301.8 Auth Reject - Permanent Authorization Failure
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
Bpi Disabled.
----------------------------------
2012-05-17 16:49:08 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:49:08 Critical I001.0 REG-RSP - invalid format or not recognized
2012-05-17 16:49:02 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:48:53 Critical R002.0 No Ranging Response received - T3 time-out (US 3)
2012-05-17 16:48:48 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:48:48 Critical I001.0 REG-RSP - invalid format or not recognized
2012-05-17 16:48:43 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:48:32 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:48:32 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:13 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
Downstream
Frequency 687 MHz
Status Locked
Annex DOCSIS
Modulation QAM256
Symbol Rate 5360537 sym/sec
Receive Power -3.4 dBmV
Signal to Noise ratio 38.6 dB
Upstream
Frequency 30 MHz
Channel ID 1
Status Ready
Mode ATDMA
Symbol Rate 5120000 sym/sec
Transmit Power 51.2 dBmV
I can get online directly connected to my Cisco modem and get normal 20/1 speeds, however now I cant really get online with the Cisco modem connected to my Linksys router despite resetting and trying everything. I've tried a bunch of different settings in haxorware, especially not autoserving config and trying different configs file but nothing works.
Whats strange is with BPI Bypass the modem says "Operational" however of course doesnt get online and the even log posted above shows why.
So does this mean they just switched us (Corona/Riverside) to BPI+ or could this be something else?
Here is Telnet log for BPI 1.0 which I have been using for a long time to get online.
I h
With Bpi Bypass
------------------------------
Time Priority Code Description
2012-05-17 16:36:27 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:16 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:33:54 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
2012-05-17 16:33:24 Notice M573.0 Modem Is Shutting Down and Rebooting...
With Bpi 1.0
----------------------------------
2012-05-17 16:40:01 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:40:01 Critical I001.0 REG-RSP - invalid format or not recognized
2012-05-17 16:39:56 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:39:44 Critical R002.0 No Ranging Response received - T3 time-out (US 3)
2012-05-17 16:39:40 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:39:40 Critical I001.0 REG-RSP - invalid format or not recognized
2012-05-17 16:39:35 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:39:26 Critical R002.0 No Ranging Response received - T3 time-out (US 3)
2012-05-17 16:39:21 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:39:21 Critical I001.0 REG-RSP - invalid format or not recognized
2012-05-17 16:39:16 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:39:05 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:39:05 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:11 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:06 Notice M571.1 Ethernet link up - ready to pass packets
2012-05-17 16:38:41 Notice M573.0 Modem Is Shutting Down and Rebooting...
With Bpi+
------------------------------------
2012-05-17 16:47:24 Error B301.8 Auth Reject - Permanent Authorization Failure
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
Bpi Disabled.
----------------------------------
2012-05-17 16:49:08 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:49:08 Critical I001.0 REG-RSP - invalid format or not recognized
2012-05-17 16:49:02 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:48:53 Critical R002.0 No Ranging Response received - T3 time-out (US 3)
2012-05-17 16:48:48 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:48:48 Critical I001.0 REG-RSP - invalid format or not recognized
2012-05-17 16:48:43 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-05-17 16:48:32 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-05-17 16:48:32 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:13 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
Downstream
Frequency 687 MHz
Status Locked
Annex DOCSIS
Modulation QAM256
Symbol Rate 5360537 sym/sec
Receive Power -3.4 dBmV
Signal to Noise ratio 38.6 dB
Upstream
Frequency 30 MHz
Channel ID 1
Status Ready
Mode ATDMA
Symbol Rate 5120000 sym/sec
Transmit Power 51.2 dBmV
I can get online directly connected to my Cisco modem and get normal 20/1 speeds, however now I cant really get online with the Cisco modem connected to my Linksys router despite resetting and trying everything. I've tried a bunch of different settings in haxorware, especially not autoserving config and trying different configs file but nothing works.
Whats strange is with BPI Bypass the modem says "Operational" however of course doesnt get online and the even log posted above shows why.
So does this mean they just switched us (Corona/Riverside) to BPI+ or could this be something else?
Here is Telnet log for BPI 1.0 which I have been using for a long time to get online.
Code:
DHCP completed successfully!
DHCP Settings:
Client Id = htype=1, value=00:25:2e:25:fa:a4
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x7baa997f
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:30:b8:cc:66:10
Ignore NAKs = 0
My offered IP address = 10.251.110.192 (primary IP address)
(1) Subnet Mask = 255.255.240.0
(3) Router IP address = 10.251.96.1
(54) DHCP Server IP address = 76.85.238.35
(82) Relay Agent IP address = 10.251.96.1
TFTP Server IP address = 76.85.237.68
CM Configuration file = '?BExV7iMAJS5Y+qQK+27A@CvtuwExp5op4bIOZvDVqCcZR
lTkUt2vk'
(2) UTC Time Offset = 0 seconds
(4) Time Server IP address = 76.85.237.68
(6) Domain Name Server = 66.75.164.89; 66.75.164.90
(7) Log Server IP address =
(51) Lease time = 574662 seconds
(58) T1 (renew) = 287331 seconds
(59) T2 (rebind) = 502829 seconds
Lease is infinite = 0
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.251.110.192, Subnet=
255.255.240.0, Gateway=10.251.96.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Suppor
t
IP addr = 10.251.110.192
Starting Time Of Day...
0x00024d1a [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress:
(Time Of Day Thread) ToD servers: 76.85.237.68
Connecting to ToD server 76.85.237.68...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.251.110.192:225
Not logging event ID 2291949724, control for level 7 is 0.
UTC returned by ToD server 3546268659; UTC offset 0
Current system time -> Thu May 17 18:37:39 2012
System start time -> Thu May 17 18:35:08 2012
Starting Tftp of configuration file...
Opening file '?BExV7iMAJS5Y+qQK+27A@CvtuwExp5op4bIOZvDVqCcZRlTkUt2vk' on 76.85.2
37.68 for reading...
tftp-enforce bypass is DISABLED
CM> Storing received cfg of size 4243 to memory
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 76.85.237.68
Server Port Number = 49048
Total Blocks Read = 9
Total Bytes Read = 4243
Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.16 -> 255.255.255.255
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.16 -> 255.255.255.255
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.16 -> Swou9riu
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.16 -> 3 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.16 -> HEX:40 00
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.16 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.18 -> 255.255.255.255
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.18 -> 255.255.255.255
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.18 -> yZaK4E8l
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.18 -> 2 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.18 -> HEX:40 00
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.18 -> 4 (i32)
TLV-11[13]: 1.3.6.1.2.1.69.1.2.1.2.19 -> 255.255.255.255
TLV-11[14]: 1.3.6.1.2.1.69.1.2.1.3.19 -> 255.255.255.255
TLV-11[15]: 1.3.6.1.2.1.69.1.2.1.4.19 -> JZjT59SYgbAYo0V
TLV-11[16]: 1.3.6.1.2.1.69.1.2.1.5.19 -> 2 (i32)
TLV-11[17]: 1.3.6.1.2.1.69.1.2.1.6.19 -> HEX:40 00
TLV-11[18]: 1.3.6.1.2.1.69.1.2.1.7.19 -> 4 (i32)
TLV-11[19]: 1.3.6.1.2.1.69.1.2.1.2.20 -> 255.255.255.255
TLV-11[20]: 1.3.6.1.2.1.69.1.2.1.3.20 -> 255.255.255.255
TLV-11[21]: 1.3.6.1.2.1.69.1.2.1.4.20 -> KJy0ptkeC1c5yHr
TLV-11[22]: 1.3.6.1.2.1.69.1.2.1.5.20 -> 3 (i32)
TLV-11[23]: 1.3.6.1.2.1.69.1.2.1.6.20 -> HEX:40 00
TLV-11[24]: 1.3.6.1.2.1.69.1.2.1.7.20 -> 4 (i32)
TLV-11[25]: 1.3.6.1.2.1.69.1.6.1.0 -> 1 (i32)
TLV-11[26]: 1.3.6.1.2.1.69.1.6.2.1.2.20 -> 4 (i32)
TLV-11[27]: 1.3.6.1.2.1.69.1.6.2.1.3.20 -> 0 (i32)
TLV-11[28]: 1.3.6.1.2.1.69.1.6.2.1.4.20 -> 1 (i32)
TLV-11[29]: 1.3.6.1.2.1.69.1.6.2.1.5.20 -> 2048 (i32)
TLV-11[30]: 1.3.6.1.2.1.69.1.6.2.1.2.22 -> 4 (i32)
TLV-11[31]: 1.3.6.1.2.1.69.1.6.2.1.3.22 -> 0 (i32)
TLV-11[32]: 1.3.6.1.2.1.69.1.6.2.1.4.22 -> 1 (i32)
TLV-11[33]: 1.3.6.1.2.1.69.1.6.2.1.5.22 -> 2054 (i32)
TLV-11[34]: 1.3.6.1.2.1.69.1.6.3.0 -> 2 (i32)
TLV-11[35]: 1.3.6.1.2.1.69.1.6.4.1.2.80 -> 4 (i32)
TLV-11[36]: 1.3.6.1.2.1.69.1.6.4.1.4.80 -> 1 (i32)
TLV-11[37]: 1.3.6.1.2.1.69.1.6.4.1.5.80 -> 1 (i32)
TLV-11[38]: 1.3.6.1.2.1.69.1.6.4.1.9.80 -> 10.0.0.0
TLV-11[39]: 1.3.6.1.2.1.69.1.6.4.1.10.80 -> 255.0.0.0
TLV-11[40]: 1.3.6.1.2.1.69.1.6.4.1.2.135 -> 4 (i32)
TLV-11[41]: 1.3.6.1.2.1.69.1.6.4.1.4.135 -> 2 (i32)
TLV-11[42]: 1.3.6.1.2.1.69.1.6.4.1.5.135 -> 1 (i32)
TLV-11[43]: 1.3.6.1.2.1.69.1.6.4.1.11.135 -> 6 (i32)
TLV-11[44]: 1.3.6.1.2.1.69.1.6.4.1.14.135 -> 135 (i32)
TLV-11[45]: 1.3.6.1.2.1.69.1.6.4.1.15.135 -> 139 (i32)
TLV-11[46]: 1.3.6.1.2.1.69.1.6.4.1.2.136 -> 4 (i32)
TLV-11[47]: 1.3.6.1.2.1.69.1.6.4.1.4.136 -> 2 (i32)
TLV-11[48]: 1.3.6.1.2.1.69.1.6.4.1.5.136 -> 1 (i32)
TLV-11[49]: 1.3.6.1.2.1.69.1.6.4.1.11.136 -> 17 (i32)
TLV-11[50]: 1.3.6.1.2.1.69.1.6.4.1.14.136 -> 135 (i32)
TLV-11[51]: 1.3.6.1.2.1.69.1.6.4.1.15.136 -> 139 (i32)
TLV-11[52]: 1.3.6.1.2.1.69.1.6.4.1.2.445 -> 4 (i32)
TLV-11[53]: 1.3.6.1.2.1.69.1.6.4.1.4.445 -> 2 (i32)
TLV-11[54]: 1.3.6.1.2.1.69.1.6.4.1.5.445 -> 1 (i32)
TLV-11[55]: 1.3.6.1.2.1.69.1.6.4.1.11.445 -> 6 (i32)
TLV-11[56]: 1.3.6.1.2.1.69.1.6.4.1.14.445 -> 445 (i32)
TLV-11[57]: 1.3.6.1.2.1.69.1.6.4.1.15.445 -> 445 (i32)
TLV-11[58]: 1.3.6.1.2.1.69.1.6.4.1.2.446 -> 4 (i32)
TLV-11[59]: 1.3.6.1.2.1.69.1.6.4.1.4.446 -> 2 (i32)
TLV-11[60]: 1.3.6.1.2.1.69.1.6.4.1.5.446 -> 1 (i32)
TLV-11[61]: 1.3.6.1.2.1.69.1.6.4.1.11.446 -> 17 (i32)
TLV-11[62]: 1.3.6.1.2.1.69.1.6.4.1.14.446 -> 445 (i32)
TLV-11[63]: 1.3.6.1.2.1.69.1.6.4.1.15.446 -> 445 (i32)
TLV-11[64]: 1.3.6.1.2.1.69.1.6.4.1.2.593 -> 4 (i32)
TLV-11[65]: 1.3.6.1.2.1.69.1.6.4.1.4.593 -> 2 (i32)
TLV-11[66]: 1.3.6.1.2.1.69.1.6.4.1.5.593 -> 1 (i32)
TLV-11[67]: 1.3.6.1.2.1.69.1.6.4.1.11.593 -> 6 (i32)
TLV-11[68]: 1.3.6.1.2.1.69.1.6.4.1.14.593 -> 593 (i32)
TLV-11[69]: 1.3.6.1.2.1.69.1.6.4.1.15.593 -> 593 (i32)
TLV-11[70]: 1.3.6.1.2.1.69.1.6.4.1.2.64 -> 4 (i32)
TLV-11[71]: 1.3.6.1.2.1.69.1.6.4.1.4.64 -> 2 (i32)
TLV-11[72]: 1.3.6.1.2.1.69.1.6.4.1.5.64 -> 1 (i32)
TLV-11[73]: 1.3.6.1.2.1.69.1.6.4.1.11.64 -> 17 (i32)
TLV-11[74]: 1.3.6.1.2.1.69.1.6.4.1.12.64 -> 68 (i32)
TLV-11[75]: 1.3.6.1.2.1.69.1.6.4.1.13.64 -> 68 (i32)
TLV-11[76]: 1.3.6.1.2.1.69.1.6.4.1.14.64 -> 67 (i32)
TLV-11[77]: 1.3.6.1.2.1.69.1.6.4.1.15.64 -> 67 (i32)
TLV-11[78]: 1.3.6.1.2.1.69.1.6.4.1.2.66 -> 4 (i32)
TLV-11[79]: 1.3.6.1.2.1.69.1.6.4.1.4.66 -> 1 (i32)
TLV-11[80]: 1.3.6.1.2.1.69.1.6.4.1.5.66 -> 1 (i32)
TLV-11[81]: 1.3.6.1.2.1.69.1.6.4.1.11.66 -> 17 (i32)
TLV-11[82]: 1.3.6.1.2.1.69.1.6.4.1.12.66 -> 67 (i32)
TLV-11[83]: 1.3.6.1.2.1.69.1.6.4.1.13.66 -> 67 (i32)
TLV-11[84]: 1.3.6.1.2.1.69.1.6.4.1.14.66 -> 68 (i32)
TLV-11[85]: 1.3.6.1.2.1.69.1.6.4.1.15.66 -> 68 (i32)
TLV-11[86]: 1.3.6.1.2.1.69.1.6.4.1.2.172 -> 4 (i32)
TLV-11[87]: 1.3.6.1.2.1.69.1.6.4.1.4.172 -> 2 (i32)
TLV-11[88]: 1.3.6.1.2.1.69.1.6.4.1.5.172 -> 2 (i32)
TLV-11[89]: 1.3.6.1.2.1.69.1.6.4.1.9.172 -> 172.16.0.0
TLV-11[90]: 1.3.6.1.2.1.69.1.6.4.1.10.172 -> 255.240.0.0
TLV-11[91]: 1.3.6.1.2.1.69.1.6.4.1.2.681 -> 4 (i32)
TLV-11[92]: 1.3.6.1.2.1.69.1.6.4.1.4.681 -> 0 (i32)
TLV-11[93]: 1.3.6.1.2.1.69.1.6.4.1.5.681 -> 1 (i32)
TLV-11[94]: 1.3.6.1.2.1.69.1.6.4.1.9.681 -> 239.193.253.0
TLV-11[95]: 1.3.6.1.2.1.69.1.6.4.1.10.681 -> 255.255.255.0
TLV-11[96]: 1.3.6.1.2.1.69.1.6.4.1.2.682 -> 4 (i32)
TLV-11[97]: 1.3.6.1.2.1.69.1.6.4.1.4.682 -> 1 (i32)
TLV-11[98]: 1.3.6.1.2.1.69.1.6.4.1.5.682 -> 3 (i32)
TLV-11[99]: 1.3.6.1.2.1.69.1.6.4.1.9.682 -> 10.128.0.0
TLV-11[100]: 1.3.6.1.2.1.69.1.6.4.1.10.682 -> 255.192.0.0
TLV-11[101]: 1.3.6.1.2.1.69.1.6.4.1.2.683 -> 4 (i32)
TLV-11[102]: 1.3.6.1.2.1.69.1.6.4.1.3.683 -> 2 (i32)
TLV-11[103]: 1.3.6.1.2.1.69.1.6.4.1.4.683 -> 1 (i32)
TLV-11[104]: 1.3.6.1.2.1.69.1.6.4.1.5.683 -> 1 (i32)
TLV-11[105]: 1.3.6.1.2.1.69.1.6.4.1.9.683 -> 224.0.0.9
TLV-11[106]: 1.3.6.1.2.1.69.1.6.4.1.10.683 -> 255.255.255.255
TLV-11[107]: 1.3.6.1.2.1.69.1.6.4.1.11.683 -> 17 (i32)
TLV-11[108]: 1.3.6.1.2.1.69.1.6.4.1.2.684 -> 4 (i32)
TLV-11[109]: 1.3.6.1.2.1.69.1.6.4.1.4.684 -> 1 (i32)
TLV-11[110]: 1.3.6.1.2.1.69.1.6.4.1.5.684 -> 1 (i32)
TLV-11[111]: 1.3.6.1.2.1.69.1.6.4.1.9.684 -> 224.0.0.0
TLV-11[112]: 1.3.6.1.2.1.69.1.6.4.1.10.684 -> 240.0.0.0
TLV-11[113]: 1.3.6.1.2.1.69.1.6.4.1.11.684 -> 17 (i32)
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Facto
ry Support
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.251.110.192:225
Insufficient heap to handle SNMP packet - TOO_BIG.
(PDU = 134224, heap = 135628)
TLV-11 failure: error status=1, error index=0
Invalid TLV-11's: 1 wrong values, 0 duplicate sets.
SNMP Error'd but Haxorware doesn't care AT ALL!
Onwards mateys!
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
While parsing/validating TLVs:
Error Param Set:
appendix C error type: 09 | .
error code: 0x8 (kRejRequiredParamNotPresent)
error string: MUST have IP, Enet, 802.1 or CMIM settings
0x00025620 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ParseAndValidateRegRspMsg:
(CmDocsisCtlThread) ERROR - REG-RSP parse error. continuing.
0x00025620 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisC
tlThread) ERROR -
REG-RSP response code NOT ok! rsp code = 2 (kRejUnrecognizedConfigSetti
ng)
0x00025620 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (Cm
DocsisCtlThread) reason: 17 (kNegOrBadRegRsp)
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
Logging event: TLV-11 - Illegal Set operation failed
Deleting DOCSIS 1.0 CoS Settings for SID 0x1
0x000256e8 [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS
CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along wit
h associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc: Releasing the lease with client id htype=1, value=00:25:2e:25:fa:a4
DHCPc: Sending Release packet; client id htype=1, value=00:25:2e:25:fa:a4
0x000256f2 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket: (DHCP ClientIf
for IP Stack1) WARNING - Failed to send packet!
0x000256f2 [DHCP Client Thread] BcmDhcpClientIf::SendRelease: (DHCP ClientIf fo
r IP Stack1) WARNING - Failed to create/send Release packet! Oh, well, no biggi
e...
0x000256f2 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 Hal
If) Removing lease IP address 10.251.110.192 from IP stack 1
0x000256fc [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 Hal
If) This is the last address on the stack; shutting the stack down:numberOfAddre
sses=1
0x000256fc [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1
HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0
, Gateway=0.0.0.0
Logging event: REG-RSP - invalid format or not recognized
Not logging event ID 2436694040, control for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory
Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x000257f6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCt
lThread)
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x000257f6 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:
(Scan Downstream Thread) Downstream Channel scan stopped!
0x0002580a [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:
(Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 0
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 111000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 117000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 495000000 Hz, QAM64
Found energy at frequency 495000000Hz! Publishing event kEventEnergyDetected...
Attempting Downstream FEC lock @ freq= 489000000 Hz, QAM64
Non-Vol Settings successfully written to the device.
Attempting Downstream FEC lock @ freq= 483000000 Hz, QAM64
CM> Attempting Downstream FEC lock @ freq= 477000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 471000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 465000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 459000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 453000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 447000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 441000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 435000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 429000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 423000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 417000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 411000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 405000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 399000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 393000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 387000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 381000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 375000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 369000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 363000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 357000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 351000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 345000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 339000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 333000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 327000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 321000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 315000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 309000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 303000000 Hz, QAM64I h