Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OneClick
#11
(11-08-2013, 04:02 PM)drewmerc Wrote: right click run as admin

I'm not sure what happened the program went through I assume it's just I'm unable to see anything on the cm (can't see the homepage) plus all the lights remain on pc light flashes ocassionally
Reply
#12
NOSH firmware
Knowledge=Power
Reply
#13
use portable version in the oneclickflash i sent you
Reply
#14
(11-08-2013, 06:07 PM)Box3r Wrote: use portable version in the oneclickflash i sent you

This is the response I'm getting:* One-click Webstar flash utility *
(visit www.sbhacker.net for more inforamtion)

- Make sure that your current modem firmware is v202r1256-060303 or later
- Make sure that your firewall is off
- Enter your Windows Network Connection Name (none=default):
-
Failed to configure the DHCP service. The interface may be disconnected.
The system cannot find the file specified.


The system cannot find the file tftpd32.exe.
The system cannot find the path specified.
The system cannot find the path specified.
'snmpd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmptrapd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpget' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.

- Wait until the TFTP Sent the Firmware (~17 seconds)
- Wait ~5 more seconds and reboot your modem
- Press enter to continue...

Would the fact that I'm on Win8 OS create a problem???

(11-08-2013, 07:43 PM)AC/POLO Wrote:
(11-08-2013, 06:07 PM)Box3r Wrote: use portable version in the oneclickflash i sent you

This is the response I'm getting:* One-click Webstar flash utility *
(visit www.sbhacker.net for more inforamtion)

- Make sure that your current modem firmware is v202r1256-060303 or later
- Make sure that your firewall is off
- Enter your Windows Network Connection Name (none=default):
-
Failed to configure the DHCP service. The interface may be disconnected.
The system cannot find the file specified.




The system cannot find the file tftpd32.exe.
The system cannot find the path specified.
The system cannot find the path specified.
'snmpd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmptrapd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpget' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.

- Wait until the TFTP Sent the Firmware (~17 seconds)
- Wait ~5 more seconds and reboot your modem
- Press enter to continue...

Would the fact that I'm on Win8 OS create a problem???

I tried it both ways run and run as admin
Reply
#15
try manually downoading NET-SNMP + tftp32 Server
Reply
#16
Ok I think I've tried it all I even got another modem to experiment with, I'm left to think that 1click flash doesn't work on WIN8 OS. Can anyone confirm or deny this for me...
Reply
#17
(24-08-2013, 01:34 AM)AC/POLO Wrote: Ok I think I've tried it all I even got another modem to experiment with, I'm left to think that 1click flash doesn't work on WIN8 OS. Can anyone confirm or deny this for me...

I'm still at it, giving it an honest effort. This is my latest issue:
C:\Users\Clinton\Desktop\Flash Scientific Atlanta 2100R2 With Ethernet>cd\
Press any key to continue . . .

C:\>snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1 s p
assword
Error in packet.
Reason: notWritable (That object does not support modification)
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.1.2.1.2.1

Press any key to continue . . .

C:\>snmpget -v2c -c public 192.168.100.1 1.3.6.1.2.1.1.1.0
SNMPv2-MIB:ConfusedysDescr.0 = STRING: Cisco DOCSIS Cable Modem <<HW_REV: 2.1; VENDOR:
Cisco; BOOTR: 2.1.6d; SW_REV: dpc2100R2-v2.0.2r1256-100324as; MODEL: DPC2100R2>
>
Press any key to continue . . .

C:\>snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2
SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this
MIB View (It is past the end of the MIB tree)
Press any key to continue . . .

C:\>snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.1.0
i 1
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.1.0

Press any key to continue . . .

C:\>snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.2.0
a 192.168.100.10
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.2.0

Press any key to continue . . .

C:\>snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.3.0
s haxorware.bin
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.3.0

Press any key to continue . . .

C:\>snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.4.0
i 1
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.99.1.1.2.4.2.2.2.4.0

Press any key to continue . . .

How can I correct recv error 10038
Reply
#18
(25-08-2013, 08:00 AM)AC/POLO Wrote: C:\>snmpget -v2c -c public 192.168.100.1 1.3.6.1.2.1.1.1.0
SNMPv2-MIB:ConfusedysDescr.0 = STRING: Cisco DOCSIS Cable Modem <<HW_REV: 2.1; VENDOR:
Cisco; BOOTR: 2.1.6d; SW_REV: dpc2100R2-v2.0.2r1256-100324as; MODEL: DPC2100R2>

this line tells you why its not working i suggest you downgrade to v202r1256-060303
http://www.haxorware.com/forums/thread-2...l#pid15163
__________________________________________________________________________________
******new discord chat linkĀ https://discord.gg/5BQQbsb*******
Reply
#19
i,ll post the reason why it isnt working later...
Knowledge=Power
Reply
#20
looooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooool
__________________________________________________________________________________
******new discord chat linkĀ https://discord.gg/5BQQbsb*******
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)