+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: ambit 250 (/showthread.php?tid=3985)
ambit 250 - goosebums - 07-06-2016
Hi guys finally I got my RS232 this exact same one from ebay:
MAX3232 RS232 Serial Port to TTL Converter Module DB9 Connector with Cables
And I also have the following USB Serial Converter cable.
PSG02504 - PRO SIGNAL - Computer Cable, Adaptor, D Sub Mini Plug, 9 Way, USB 2.0 A Plug, 1.97ft, 600mm, Black | Farnell element14
Can some one help me with the cable layout on my RS232 it has in the following order
VCC | TX | RX | GND and on the modem board nothing maybe just j353
RE: ambit 250 - goosebums - 07-06-2016
Can anyone help, with these pins as the modems pcb board does not have the layout for what I need to connect the cables too only the rs323 has the layout.
RE: ambit 250 - Ph@ntom - 01-02-2017
I know its a bit late BUT!
Look here there is some good pictures of the pinout
http://thecablemodemguide.tripod.com/page10.htm