SB5101 Half-Brick... can u help me? - Printable Version +- Haxorware Forums (http://www.haxorware.com/forums) +-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6) +--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7) +--- Thread: SB5101 Half-Brick... can u help me? (/showthread.php?tid=2949) Pages:
1
2
|
SB5101 Half-Brick... can u help me? - franklinzero - 10-02-2014 I put the ethernet mac as ff: ff: ff: ff: ff: ff and usb as ff: ff: ff: ff: ff: fe and now I can not access the interface haxor. But modem is operational and online. Now I have to re install haxor or is there another way? If re install is the only way... I just need to overwrite with lite file of haxor by jtagutility with serial "gadget" and all gonna be ok? RE: SB5101 Half-Brick... can u help me? - neo_ - 10-02-2014 Edit the nvram RE: SB5101 Half-Brick... can u help me? - southernyankey1970 - 10-02-2014 just upload the nonvol backup you made when you got the modem...You of course made 1 right away right? RE: SB5101 Half-Brick... can u help me? - franklinzero - 10-02-2014 I dont have any nonvol backup, already got that sb5101 premod. And i dont knwo how to edit the nvram. If anyone can point me any tutorial. RE: SB5101 Half-Brick... can u help me? - southernyankey1970 - 11-02-2014 When you changed the mac Haxorware should have save a backlup copy for you. Look under file manager in Haxorware. RE: SB5101 Half-Brick... can u help me? - franklinzero - 11-02-2014 (11-02-2014, 06:51 AM)southernyankey1970 Wrote: When you changed the mac Haxorware should have save a backlup copy for you. Look under file manager in Haxorware. Like i say in first post, i cant acess the haxorware interface, then i cant do it. RE: SB5101 Half-Brick... can u help me? - drewmerc - 11-02-2014 backup, extract the nonvol, reflash from scratch(stock first then haxor) finally use haxor to upload your extracted nonvol and then edit it the correct values(tbh i dont know why you'd need to as your isp does not seem to be checking these values) RE: SB5101 Half-Brick... can u help me? - franklinzero - 11-02-2014 (11-02-2014, 04:44 PM)drewmerc Wrote: backup, extract the nonvol, reflash from scratch(stock first then haxor) Ill try to do it, but i only know how to flash. Ill love if u can point me tutorials to do the other stuffs. And just for info, i dont need to change that values for any special reason, i just need to acess the haxor interface again, if that certificate what i'm using goes down, i cant change it cause i dont have pannel acess. And as it is now i got timeout error everytime i try to acess by ...101.1 Really thx bro, and sorry for my english, thats not my natural language. RE: SB5101 Half-Brick... can u help me? - drewmerc - 11-02-2014 in toms its something like read 9fc000000 save cfg save 9fc000000 2000000 then the normal flash crap to reflash RE: SB5101 Half-Brick... can u help me? - ariescr - 09-03-2014 Hi frank I have the same error were you able to fix it ? (11-02-2014, 05:40 PM)franklinzero Wrote:(11-02-2014, 04:44 PM)drewmerc Wrote: backup, extract the nonvol, reflash from scratch(stock first then haxor) |