+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: You master, as shown in figure usb TTL to modem SB5101e for connection? (/showthread.php?tid=2231)
You master, as shown in figure usb TTL to modem SB5101e for connection? - yhrlive - 04-01-2013
You master, as shown in figure usb TTL to modem SB5101e for connection?
![[Image: OxRRa.jpg]](http://i.imgur.com/OxRRa.jpg)
RE: You master, as shown in figure usb TTL to modem SB5101e for connection? - drewmerc - 04-01-2013
![[Image: ObLLq.jpg]](http://i.imgur.com/ObLLq.jpg)
RE: You master, as shown in figure usb TTL to modem SB5101e for connection? - yhrlive - 06-01-2013
This connection right? "VCC" choose 3.3 V or 5 V?
ttachment=569]
RE: You master, as shown in figure usb TTL to modem SB5101e for connection? - drewmerc - 06-01-2013
it looks correct to me
RE: You master, as shown in figure usb TTL to modem SB5101e for connection? - yhrlive - 08-01-2013
(06-01-2013, 07:45 PM)drewmerc Wrote: it looks correct to me
Use the above picture connection method, open putty and settings, and then stay in this state, please look at the picture.
Consult
RE: You master, as shown in figure usb TTL to modem SB5101e for connection? - drewmerc - 08-01-2013
could be a silent bootloader, just jtag the damn thing
RE: You master, as shown in figure usb TTL to modem SB5101e for connection? - yhrlive - 08-01-2013
(08-01-2013, 11:49 AM)drewmerc Wrote: could be a silent bootloader, just jtag the damn thing
What do you mean? What should I do?
(08-01-2013, 11:49 AM)drewmerc Wrote: could be a silent bootloader, just jtag the damn thing
Thank you very much for your help
Just tested usb - TTL not bad, can be connected right way?
RE: You master, as shown in figure usb TTL to modem SB5101e for connection? - newbie888 - 09-01-2013
(08-01-2013, 12:09 PM)yhrlive Wrote:(08-01-2013, 11:49 AM)drewmerc Wrote: could be a silent bootloader, just jtag the damn thing
What do you mean? What should I do?
(08-01-2013, 11:49 AM)drewmerc Wrote: could be a silent bootloader, just jtag the damn thing
Thank you very much for your help
Just tested usb - TTL not bad, can be connected right way?
looks like you have the rx and tx connected backwards. the rx on the serial cable should be wired to the tx on the board and the tx on the cable should be wired to the rx on the board... if you don't have noisy bootloader all this won't work so you'll end up having to jtag it anyway. ...however if you do have noisy bootloader try rewiring correctly, make sure baud, parity, flow control set-up and see if works.
RE: You master, as shown in figure usb TTL to modem SB5101e for connection? - kornwood - 09-01-2013
depending on the firmware you can still get a silent bootloader to say hello
set it up to 9600 baud as you plug it in hit enter a few times quickly change it to 11255 baud
you will get what you want but it will stop as soon as the watchdog sees it so if you disable the watchdog at that point it will stay but its up to you to find the watchdog
but like i said it depends on which stock firmware is installed