Modem Sb5101 assitance please

[Keptoknight]

I will sugar code as much as I can since I do not want to break any rules.
I know this forum is UK but I came to ask for some assistance please

I am from Manhattan, NYC Haxorware 1.1 rev 39 DOCSIS 1.1
I have been using Dog-Sniffer within my node and gathered plenty of 10.xx.xx.xx with config files. I know all those are within my node only so I cannot use them at all only to swap.

My question is can I use the M** number from my other apartment located in the Bronx? It is subscribed to Optimum Online. Or I can only scan within that node using that computer? Both are subscribed by different cable providers. I am trying to gather knowledge about Node limits.

Thank You. You all Sexy. If anyone was from my area I would swap so easily.

[drewmerc]

forum is not just for uk (it's just that i am, not that this matters as we always get security updates before you yanks)
whats dog-sniffer?? i googled it and got this


whats M** number??
needs to be same provider as they are different networks (not node connected at the ctms backend)

sexy?? i am not and never have been a blue box

[Keptoknight]

DHCP-Sniffer, MAC Number

How do I know when the Node is not connected? That is my main question Do I check from different distance/miles? Like I have to Sniff every 2 miles and search for open wireless networks and sniff?

I went to the site to check info within my Node and got this:

Your IP 69.69.69.69
Resolved cpe-69-69-69-69.nyc.res.rr.com
Your U** is IP is not a valid Blueyonder or NTL address.

Thank You. If there was a page in this forum for swapping I wouldn't mind ><

[drewmerc]

i dont know how nodes are assigned were you are but it should be obvious for me it's cable.wigan.ubr12.ipaddress.blueyonder and next node will be cable.wigan.ubr13.ipaddress.blueyonder (for the record i will say using ubr13 would not be a good idea nor would 11 but any other number would be fine)

http://whatismyipaddress.com/ and click additional ip infomation it'll give you your full ip address

this board is located in US so mac swapping is a big no

[Keptoknight]

Yeah I click that and gives me something like this exactly:

Hostname: cpe-12-34-567-89.nyc.res.rr.com
ISP: Road Runner
Organization: Road Runner
Proxy: None detected
Type: Broadband
Assignment: Dynamic IP

It does not give me a ubr# like yours do. I guess because I am from a different country or is there something wrong?
I did click on additional information as well:

Country: United States
State/Region: New York
City: New York
Latitude: xxxxxx
Longitude: xxxxxx
Area Code: 212

by the way i think your sexy.

[drewmerc]

humm how interesting
what i'd do (no idea if this is worth doing or not) is a trace route to rr.com (quick test i may be right)

Code:

drewmerc@drewmerc-ML6227B ~ $ traceroute rr.com
traceroute to rr.com (24.28.199.168), 30 hops max, 60 byte packets
1  192.168.0.1 (192.168.0.1)  5.405 ms  6.513 ms  6.492 ms
2  xxx.xxxxxx.uk.xxxxxxxxx.net (xxx.xxx.xxx.xxx)  48.226 ms  50.271 ms  51.985 ms
3  80.238.60.33 (80.238.60.33)  51.939 ms  53.765 ms  53.744 ms
4  89.200.131.171 (89.200.131.171)  62.531 ms  63.986 ms  65.396 ms
5  bu4.gr10.telon.uk.easynet.net (89.200.135.145)  68.836 ms  70.059 ms  71.100 ms
6  se0-7-0-0.gr10.sdnyc.us.easynet.net (87.86.77.111)  140.742 ms  119.229 ms  121.022 ms
7  nyc20.tbone.rr.com (198.32.118.83)  122.109 ms  123.140 ms  124.664 ms
8  ae-2-0.cr0.nyc30.tbone.rr.com (66.109.6.162)  127.006 ms  128.321 ms  130.216 ms
9  ae-4-0.cr0.dca20.tbone.rr.com (66.109.6.28)  137.181 ms  138.135 ms  139.165 ms
10  ge-0-0-0.ar1.dca01.tbone.rr.com (66.109.10.80)  141.172 ms  143.502 ms  145.489 ms
11  66.109.6.85 (66.109.6.85)  148.054 ms  147.049 ms  148.934 ms
12  24.30.192.202 (24.30.192.202)  124.284 ms  127.901 ms  126.915 ms
13  * * *
14  * * *
15  * * *
16  * * *
17  * * *
18  * * *
19  * * *
20  * * *
21  * * *
22  * * *
23  * * *
24  * * *
25  * * *
26  * * *
27  * * *
28  * * *
29  * * *
30  * * *

sorry about linux i'm at work but you can see where i hit the rr network 7 nyc20.tbone.rr.com
if you trace route from home you should always have the same start point on the network
i'm guessing on a different node you'll have a different start point

[Keptoknight]

Tracing route to rr.com [24.28.199.168]
over a maximum of 30 hops:

1 8 ms 12 ms 10 ms 10.xx.x.x
2 13 ms 7 ms 7 ms gig-0-3-0-10-nycmnyg-rtr2.nyc.rr.com [24.168.1
.13]
3 9 ms 8 ms 9 ms tg-3-2-0-nyqun91-jun01.nyc.rr.com [24.29.151.1
]
4 9 ms 9 ms 9 ms ae5-nycsnyoo-rtr1.nyc.rr.com [24.29.148.70]
5 9 ms 9 ms 9 ms 107.14.19.22
6 9 ms 16 ms 12 ms ae-0-0.cr0.nyc30.tbone.rr.com [66.109.6.26]
7 46 ms 15 ms 16 ms ae-4-0.cr0.dca20.tbone.rr.com [66.109.6.28]
8 16 ms 14 ms 28 ms ge-0-0-0.ar1.dca01.tbone.rr.com [66.109.10.80]
9 16 ms 15 ms 16 ms 66.109.6.85
10 16 ms 17 ms 15 ms 24.30.192.202
11 21 ms 16 ms 18 ms 24-28-199-168.rr.com [24.28.199.168]

Trace complete.

C:\Users\Keptoknight>

Typing traceroute give error.
I went to Cmd then typed= tracert rr.com

With the sb5101 haxorware no router.

[drewmerc]

http://www.r1ch.net/stuff/ftrace/

[Keptoknight]

Used wftrace:

Tracing route to 24-28-199-168.rr.com [24.28.199.168] with TTL of 32:

1 8ms 8ms 8ms 10.xx.x.x
2 9ms 10ms 8ms gig-0-3-0-10-nycmnyg-rtr2.nyc.rr.com [24.168.137.13]
3 9ms 9ms 11ms tg-3-2-0-nyqun91-jun01.nyc.rr.com [24.29.151.114]
4 9ms 9ms 8ms ae5-nycsnyoo-rtr1.nyc.rr.com [24.29.148.70]
5 9ms 9ms 9ms 107.14.19.22
6 12ms 14ms 10ms ae-0-0.cr0.nyc30.tbone.rr.com [66.109.6.26]
7 18ms 14ms 16ms ae-4-0.cr0.dca20.tbone.rr.com [66.109.6.28]
8 16ms 15ms 14ms ge-0-0-0.ar1.dca01.tbone.rr.com [66.109.10.80]
9 18ms 15ms 15ms 66.109.6.85
10 16ms 16ms 31ms 24.30.192.202
11 15ms 17ms 14ms 24-28-199-168.rr.com [24.28.199.168]

Traceroute complete.

Ok good progress. So what I will be checking for is 6. (nyc30) In my case nyc30 would be my ubr?