Forceware weirdness on SB6121

[zxa1o]

Thanks for the fast replies!

So to assist in troubleshooting, here's the contents of forceware.cfg:

Code:

modem_type=SB6121                                
swdl_mode=0                                      
bpi_mode=1                                      
auto_start=0                                    
force_config=0                                  
conlog_mode=1                                    
lanip=192.168.100.1                              
ignore_dhcpnak=0                                
qos_zero=0                                      
docsis_filters=1                                
snmp_mode=1                                      
ds_chan_max=4                                    
us_chan_max=4                                    
cmstatd=1                                        
boot_check=1                                    
version=v1.4b1                                  
mfg_cert=Motorola

As you can see, the IP is still 192.168.100.1, and autostart is not enabled. Any more suggestions? I'm thinking about changing force_config to 1, just to see what it does. Oh by the way, I soldered on a pin header to the breadboard, just in case I have to go that route.