Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SB5101 not working
#11
(07-01-2010, 10:57 PM)laythy Wrote: hi there
im new to all this so i might not know much but i kinda know a bit about what im doing

a friend of mine gave me his modem that worked fine at his house but its not working at mine

i tried another one that worked at his house too but still not working on mine

we live in the same area but might not be the same range so this might be the problem

we both have comcast and using DNS 208.67.222.222, 208.67.220.220

i am using a mac but i can get access to a pc if i need to

the modem is flashed with Haxorware Version 1.1 Revision 38

checked boxes in setting are
Disable Firmware Upgrades
Force Network Access
DHCP Server

Frequency settings
597000000
549000000
339000000
chan 4

using d11_m_sb5101_showcase_c05.cm file
BPI+DOCSIS1.1 tried to bypass still didnt work

here is a log file

2010-01-07 17:02:35 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:02:34 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:02:32 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:02:31 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:02:31 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:02:31 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:02:30 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:02:26 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:02:26 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:02:20 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:02:19 Notice M572.0 Ds Pulse Failed - Reinitialize MAC...
2010-01-07 17:02:17 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2010-01-07 17:02:13 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2010-01-07 17:02:08 Critical R002.0 No Ranging Response received - T3 time-out (US 1)
2010-01-07 17:01:39 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:01:39 Notice M572.0 T1 No Ucd Timeout - Reinitialize MAC...
2010-01-07 17:01:39 Critical U001.0 No UCD's Received - Timeout
2010-01-07 17:01:27 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:01:27 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:01:23 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:01:22 Notice M572.0 Ds Pulse Failed - Reinitialize MAC...
2010-01-07 17:01:21 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2010-01-07 17:01:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2010-01-07 17:01:06 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
1970-01-01 00:00:19 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:12 Critical R002.0 No Ranging Response received - T3 time-out (US 1)
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
if you are not paying for service there may be a filter on your line
Reply
#12
try this, i had the same problem:
try a diff mac, put bpi + bypass, change the last 5 numbers of the serial to w/e.
on frequence just have the 1st one and the rest put on 0. check on: disable firmware, force network. and bypass ftp... and by the way the errors on the log mean that the signal is very weak.. try connecting your modem straight from the drop and i bet it would be operational Smile i had the same problem..
[Image: 713597747.png][Image: 10186906.png]
Reply
#13
i have cable tv at my house but maybe there is a filter i will check into that as the box is behind my house.

about changing the mac. not sure which one of the 3 should i change im guessing the 1st one as the 2nd is the ethernet and 3rd is the usb am i right?

and what should i change them to? just anything?

i have got my hand on a laptop now so i can run windows programs on it but still not sure how to use that sniffer

ill try to check for the filter thinggy in the morning see if it might be blocked by it maybe

btw im using a 4db splitter right from where the cable comes in one go to the modem the other go to my tv sets

do u guys think it might been blocked by comcast? i mean they probably already know ppl like us are doing this and trying to do somthign to prevent it maybe they got to block that somehow in my area?

thanx everyone for the replies i been bust with school lately and havent got the chance to check back
Reply
#14
i had same problem. it took me a while get this but go on baseline privicy on the main page and change top setting to docsis1.0 i was also told to download the tmac program type in google n download n change mac. it was working fine but now its comin up with regestraition complete instead of operational could anyone help with that please. dunno if i was any help im very new at this n not actually flashed my self but trying to learn also is it true they will be going off perminently soon
Reply
#15
hi, change your mac address and / or change the frequencies, but more likely your mac address does not work in the area where you connect your cable modem.
Reply
#16
(02-02-2010, 06:31 AM)tauro91 Wrote: try this, i had the same problem:
try a diff mac, put bpi + bypass, change the last 5 numbers of the serial to w/e.
on frequence just have the 1st one and the rest put on 0. check on: disable firmware, force network. and bypass ftp... and by the way the errors on the log mean that the signal is very weak.. try connecting your modem straight from the drop and i bet it would be operational Smile i had the same problem..

hey i did the same with you and got Operational but i still can't get online :|.
Reply
#17
I had same problem before a month but i told my to modem service provider. He solved all problems and now i use it without any problem. So i think you should to tell your problem to your modem service provider. He will help you.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)