(31-10-2009, 11:53 AM)drewmerc Wrote:Quote:I believe the 'Code Verification Certificate' Is one of the certificates stored in a stock modems firmware. It is defined by the manufacturer and model of modem you are using, and is stored in your modems firmware...getting overwritten if you flash it with a 2mb dump....but not if you just install the firmware itself (hint).
When you reg on the VM network without valid BPI/BPI+ certificates, the modem is told by the config file to download updates to its firmware / certs securely..using RSA encryption and all sorts of nastiness.
However, to even initiate this secure download, the CVC of your modem is mathematicaly compared to a string in the config file downloaded. If it's a match, the modem attempts to set up the secure download of its update.
If not...either due to hacked FW having the wrong CVC, or say a stock a250 downloading a Motorola config file, validation will fail and the BPI certs will not be updated. This never used to be much of a problem, but with BPI being enforced properly now....that's what's fking us over with the later model configs.
altho it can be caused by the the modem your trying to spoof being to near (the next ubr)
or trying to use a 50meg config (this is the only time i've seen it myself)
http://www.techwatch.co.uk/forums/57478-...ssage.html
thanks mate.
so first of all, with regards to my last post (post 3) and attached screenshot etc, is that part looking set up ok ?
secondly, what youve just posted about the cvc, how can me get the proper details written into the formware then ?? is it impossible ? its a bit of a pain in the ass if we cant as it diconnects every now and again, its strange though as it can be solid for like 2 days, then other days its bombarded going on/off all the time, you think thats what causing the disconnects ?
and thirdly, can you show me the main screenshots of how all the settings and things in haxoware should be properley set, ive got a feeling ive not got some things right here.