Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Telnet Commands
#1
-----------------------------------
stop scanning frequency
----------------------------------
cd /d
scan_stop
or
cd /cm
scan_stop
-----------------------------------
start scanning frequency
-----------------------------------
cd /d
goto_ds 327 (will be 327 Mhz, and if not hitch continues scanning)
---------------------
show HFC IP
---------------------
cd /d
ip_show
or:
cd /ip
lease_show
------------------------------------------------------------
Show information about registered modem
------------------------------------------------------------
cd /d
modem_caps
-----------------
clear logs
-----------------
cd /e
flush
------------------------------
disable snmp filters
------------------------------
cd /s
filters off
yes
----------------------------------
set snmp to NoAccess
----------------------------------
cd /s
view_v1v2 NoAccess
----------------------------------
show snmp information
----------------------------------
cd /s
n2m
y
-------------------------
Hide System OID
-------------------------
cd /s
delete sysDescr
write
-------------------------------
print certificate values
-------------------------------
cd /n/b
print private
print public
print root
print cm_cert
print ca_cert
------------------------------------
change certificate values
------------------------------------
cd /n/b
change_key public
change_key private
change_key root
change_key cm_cert
change_key ca_cert
write
----------------------------------------------------------
place root or ca_cert in dynamic memory
----------------------------------------------------------
cd /n/b
key_location root false
key_location ca_cert false
write
---------------------------------------
set frequency and channel
---------------------------------------
cd /n/d
ds_frecuency xxx <- your weightings in mhz
us_channel x <- your number of channel
write
-------------------------------------------------------------
change the start up downstream frequency
-------------------------------------------------------------
cd /n/d
startup_dsfreq xxxxxx
cd ..
write
---------------------------------
activating DOCSIS 1.1
---------------------------------
cd /n/d
enable docsis11 true
write
-------------------
disable bpi
-------------------
cd /n/d
enable bpi false
write
-------------------
enable bpi+
-------------------
cd /n/d
enable bpi true
bpi_version 1
write
-------------------
disable bpi+
-------------------
cd /n/d
enable bpi true
bpi_version 0
write
-------------------------
change tftp info
-------------------------
cd /n/d
enable force_cfgfile true
dhcp_settings
My IP Address: [192.168.100.1] {hit enter}
Subnet Mask: [255.255.255.0] {hit enter}
Router IP Address: [192.168.100.254] {hit enter}
Those are the only 3 that really need to be changed.
Do you want to change the other settings? [no] (hit Y}
TFTP Server IP Address: [10.10.10.254] type in the IP of your TFTP server here
Config file name: [cm.bin] {type config file}
Time Server IP Address: [10.10.10.254]
SysLog Server IP Address: [10.10.10.254]
----------------------------
change the tuner
----------------------------
cd /n/h
cm_tuner xx (xx its share)
write
---------------------------------------------
change the annex for your area
---------------------------------------------
cd /n/h
annex_ # (# = A -> EuroDOCSIS, B -> DOCSIS, C -> more)
cm_annex @ (@ = 1 -> Annex A, 0 -> Annex B, 2 - Annex C, 3 hybrid)
Write
(It is necessary to change the cm_annex if you change the annex)
---------------------------------
change Ethernet MAC
---------------------------------
cd /n/h
mac_address 2 aa:bb:ccBig Grind:ee:ff
write
---------------------------
change USB MAC
---------------------------
cd /n/h
usb_mac_address aa:bb:ccBig Grind:ee:ff
write
------------------------------
change the HFC MAC
------------------------------
cd /
write_memory 2155776876 0x11
write_memory 2155776877 0x22
write_memory 2155776878 0x33
write_memory 2155776879 0x44
write_memory 2155776880 0x55
write_memory 2155776881 0x66
cd /n
write
or
Assuming our MAC address is AA:BB:CCBig GrinD:EE:FF, enter:
write_memory -s 4 0x807e8b98 0xAABBCCDD
write_memory -s 2 0x807e8b9c 0xEEFF
or
cd n/h
mac_address 1 aa:bb:ccBig Grind:ee:ff
cd /n
write
-----------------------------------
show the current state
-----------------------------------
cd /n/h
show
or:
cd /n/d
show
------------------------------
enable telnet access
------------------------------
cd /n/m
enable_telnet true
write
----------------------------------------------------------
change the username and pass for telnet
----------------------------------------------------------
cd /n/m
user_name <your desired username here>
password <your desired password here>
write
-----------------------------------------
diable external telnet access
-----------------------------------------
cd /n/m
telnet_ipstacks 2
write
--------------------------------
stealth snmp settings
--------------------------------
cd /n/s
max_dload_tries 0
hide_ipstack_ifentries true
docsDevSwAdminStatus 3
docsDevSwOperStatus 2
diag_disable_post_reg true
write
------------------------------------------------------
old stealth mode (release hfc ip lease)
------------------------------------------------------
cd /ip
ipconfig 1 release
Knowledge=Power
Reply


Messages In This Thread
Telnet Commands - by ABMJR - 08-07-2013, 07:22 PM
RE: Telnet Commands - by dragonlord7791 - 08-07-2013, 07:55 PM
RE: Telnet Commands - by modembricker - 09-07-2013, 06:42 AM
RE: Telnet Commands - by dragonlord7791 - 09-07-2013, 11:58 PM
RE: Telnet Commands - by modembricker - 10-07-2013, 11:11 PM
RE: Telnet Commands - by southernyankey1970 - 11-07-2013, 12:18 AM
RE: Telnet Commands - by Box3r - 01-12-2014, 03:28 AM
RE: Telnet Commands - by southernyankey1970 - 01-12-2014, 05:32 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)