Thread Rating:
  • 2 Vote(s) - 3.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ISP POINT ON SB6121 / SB6141 FOR USBJTAG
#11
Can't see the image
Reply
#12
i can't see the pictures >;;;;;
Reply
#13
can anyone upload the image again? Thank you.
Reply
#14
ISP point is pin 2. If you play around with it, you can find it too.
Reply
#15
(16-06-2013, 08:46 PM)Pir8pete Wrote: [Image: 39823316.jpg]
[Image: 41945462.jpg]

Two main things to make this work are; you must power on the modem with it's power supply, and use the ISP point.  It doesn't matter what order things are connected or boot up in, just connect and detect.

Just to show how much easier this setup is, here's the finished product.  Used an 11 wire ribbon with a shot from the hot glue gun.

[Image: img2146f.jpg]
[Image: img2148t.jpg]
[Image: img2147ug.jpg]
[Image: img2149k.jpg]
[Image: img2152z.jpg]
[Image: img2153g.jpg]
[Image: img2154l.jpg]
[Image: 24937364.jpg]




Added Sept. 10th 2014;

Firmware Image for bank 1 and 2: SB_KOMODO-1.0.6.13-SCM00-NOSH-NNDMN

Cert. has been removed, enjoy!

http://www40.zippyshare.com/v/55405146/file.html

Hey Pir8pete,
Can you please update these links so we can view/download them. I know, 4 years later and peeps still referring to this. Thanks
Reply
#16
If you are using Jtagnt u don't need ISP point for sb6120 , sbv6220 or sb6141, just apply 3v at pin 2 of the flash and the jtag will detect the chip.
Reply
#17
that's it and more models are made like this Big Grin
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)