Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
arris toutchstone cfg
#1
i have an touchston i find the servers from the cfg file but i can obtain them thru the windows tftp in cmd.
here is the cfg thru my modems monitor

CM Config File: tftp://172.16.68.21/tg_6m1m_02.cm
MTA Config File: tftp://172.16.68.21/tg_mta_l1.bin
Warning: The modem does not store copies of its configuration files. Below you will find the currently used values of parameters commonly set using these files. The files may or may not set these values or contain additional information. This information is listed for convenience only.


Common CM Config Parameters

NetworkAccess = Yes
UpgradeServer = 172.16.68.20
MaxCpeAllowed = 2
PrivacyEnable = 1
SnmpMib = docsDevSwAdminStatus.0 2
SnmpMib = arrisCmDoc30AccessHttpTimeout.0 0
UpstreamServiceFlow =
SfReference = 0
# SfId = 12079 -- assigned by CMTS, correlates to PcSfId
SfClassName = ""
SfQosSetType = 7
SfTrafficPriority = 1
SfMaxTrafficRate = 1024000
SfMaxTrafficBurst = 8192
SfMinReservedRate = 0
SfMinReservedRatePktsize = 0
SfActiveQosTimeout = 0
SfAdmittedQosTimeout = 200
SfMaxConcatBurst = 8192
SfSchedulingType = 2
UpstreamServiceFlow =
SfReference = 0
# SfId = 12081 -- assigned by CMTS, correlates to PcSfId
SfClassName = ""
SfQosSetType = 7
SfTrafficPriority = 7
SfMaxTrafficRate = 88000
SfMaxTrafficBurst = 1522
SfMinReservedRate = 32000
SfMinReservedRatePktsize = 0
SfActiveQosTimeout = 0
SfAdmittedQosTimeout = 200
SfMaxConcatBurst = 1522
SfSchedulingType = 2
UpstreamServiceFlow =
SfReference = 0
# SfId = 12082 -- assigned by CMTS, correlates to PcSfId
SfClassName = ""
SfQosSetType = 7
SfTrafficPriority = 5
SfMaxTrafficRate = 512000
SfMaxTrafficBurst = 3044
SfMinReservedRate = 0
SfMinReservedRatePktsize = 0
SfActiveQosTimeout = 0
SfAdmittedQosTimeout = 200
SfMaxConcatBurst = 1522
SfSchedulingType = 2
DownstreamServiceFlow =
SfReference = 0
# SfId = 12080 -- assigned by CMTS, correlates to PcSfId
SfClassName = ""
SfQosSetType = 7
SfTrafficPriority = 1
SfMaxTrafficRate = 6144000
SfMaxTrafficBurst = 3044
SfMinReservedRate = 0
SfMinReservedRatePktsize = 0
SfActiveQosTimeout = 0
SfAdmittedQosTimeout = 200
DownstreamServiceFlow =
SfReference = 0
# SfId = 12083 -- assigned by CMTS, correlates to PcSfId
SfClassName = ""
SfQosSetType = 7
SfTrafficPriority = 7
SfMaxTrafficRate = 88000
SfMaxTrafficBurst = 1522
SfMinReservedRate = 32000
SfMinReservedRatePktsize = 0
SfActiveQosTimeout = 0
SfAdmittedQosTimeout = 200
DownstreamServiceFlow =
SfReference = 0
# SfId = 12084 -- assigned by CMTS, correlates to PcSfId
SfClassName = ""
SfQosSetType = 7
SfTrafficPriority = 5
SfMaxTrafficRate = 10240000
SfMaxTrafficBurst = 3044
SfMinReservedRate = 0
SfMinReservedRatePktsize = 0
SfActiveQosTimeout = 0
SfAdmittedQosTimeout = 200

UpstreamPacketClassification =
PcServiceFlow = 12082
PcIdentifier = 1
PcRulePriority = 64
PcActivationState = 1
PcIpProtocol = 17
PcIpSourcePortStart = 0
PcIpSourcePortEnd = 65535
UpstreamPacketClassification =
PcServiceFlow = 12082
PcIdentifier = 2
PcRulePriority = 64
PcActivationState = 1
PcIpProtocol = 17
PcIpSourcePortStart = 0
PcIpSourcePortEnd = 65535
UpstreamPacketClassification =
PcServiceFlow = 12081
PcIdentifier = 1
PcRulePriority = 0
PcActivationState = 1
PcIpProtocol = 256
PcIpSourcePortStart = 0
PcIpSourcePortEnd = 65535
UpstreamPacketClassification =
PcServiceFlow = 12081
PcIdentifier = 2
PcRulePriority = 64
PcActivationState = 1
PcIpProtocol = 17
PcIpSourcePortStart = 0
PcIpSourcePortEnd = 65535
DownstreamPacketClassification =
PcServiceFlow = 12084
PcIdentifier = 1
PcRulePriority = 0
PcActivationState = 1
PcIpProtocol = 17
PcIpDestPortStart = 0
PcIpDestPortEnd = 65535
DownstreamPacketClassification =
PcServiceFlow = 12084
PcIdentifier = 2
PcRulePriority = 0
PcActivationState = 1
PcIpProtocol = 17
PcIpDestPortStart = 0
PcIpDestPortEnd = 65535
DownstreamPacketClassification =
PcServiceFlow = 12083
PcIdentifier = 1
PcRulePriority = 0
PcActivationState = 1
PcIpProtocol = 256
PcIpDestPortStart = 0
PcIpDestPortEnd = 65535
any one can help with the right command??
maybe i make some mistake!:S
thanks
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)