28-08-2012, 01:15 AM
|
Pre-modded modem on my paid for internet connection
|
28-08-2012, 01:30 AM
Bad for who?
Post a screenshot of the config.. If its 13 letters of Caps and lower case and some numbers... Lets see
Knowledge=Power
 (28-08-2012, 01:30 AM)ABMJR Wrote: Bad for who? I included one of the downloaded config files. Let me know if you need something else -- thanks for your help. 
vca69834ncx.txt (Size: 3.07 KB / Downloads: 36)
(28-08-2012, 02:02 AM)sinusoid Wrote:(28-08-2012, 01:30 AM)ABMJR Wrote: Bad for who? Meanwhile, I am trying to run a tftp server off of my laptop for the modem to download the config file ... not having much luck yet. The tftp process on the modem is timing out on "socket select"
28-08-2012, 02:53 AM
do atelnet boot log and see what the ip is for the tftp cfg server and try to download thaT FROM THE ISP SERVER.
It looks like the real config file name is obscured. Meanwhile, when I try to tftp from the server for 'd;kfoA,.iye' I am getting a file not found...
0x000086c4 [Time Of Day Thread] BcmDocsisTimeOfDayThread::HandleToD: (Time Of ay Thread) WARNING - Timed out waiting for a response from the ToD server. Waiting 2000 ms before trying this server again... Logging event: ToD request sent- No Response received Starting Tftp of configuration file... Opening file 'd;kfoA,.iye' on 10.21.28.1 for reading... tftp-enforce bypass is using 10.21.28.1:d;kfoA,.iye Initiating fake TFTP Get (tftp-enforce bypass) CM> Bandwidth request failure! Status = 0 Connecting to ToD server 10.21.28.1... Sending UDP ToD request to server... Bypass succeeded.File was 2632 bytes CM> 0x00008f8e [Time Of Day Thread] BcmDocsisTimeOfDayThread::HandleToD: (Time Of Day Thread) WARNING - Timed out waiting for a response from the ToD server. Waiting 2000 ms before trying this server again... Logging event: ToD request sent- No Response received CM> Storing received cfg of size 2632 to memory Tftp read < 512 bytes, we have reached end of file. Tftp transfer complete! TFTP Settings: Stack Interface = 1 Server Ip Address = 10.21.28.1 Server Port Number = 69 Total Blocks Read = 6 Total Bytes Read = 2632 Config file was read! IP Initialization completed... MAX CPE per CM is being set to 32 Ok, I got the config file opened using vultureware. See attached. I assume I need to modify as needed. The next question is what do I use for a passphrase when saving?
28-08-2012, 07:42 AM
The passphrase is called the shared secret by the ISP's and I don't know of anyway to get it... unless you know the private snmp string, then maybe you could download the config from the CMTS and take a look around and find the shared secret. But that is another thing all together.
So the issue then is that I can't get this shared passphrase. How is it that I was able to open the file without a passphrase?
Does this leave me pretty much stuck? -- I don't think I am going to try getting into the CMTS. It's Docsis 1.0.... fyi Thanks,
28-08-2012, 01:17 PM
(28-08-2012, 07:42 AM)SlowGrind6 Wrote: The passphrase is called the shared secret by the ISP's and I don't know of anyway to get it... unless you know the private snmp string, then maybe you could download the config from the CMTS and take a look around and find the shared secret. But that is another thing all together. you don't have to know the private string to find out the shared secret.
28-08-2012, 03:43 PM
so - I found the community string. The shared secret is a different thing correct?
In any case - this is still docsis 1.0. Isn't there a chance of uncapping this effing thing. (sb5101i) (28-08-2012, 03:43 PM)sinusoid Wrote: so - I found the community string. The shared secret is a different thing correct? Alright, it is pretty clear to me the shared secret is dynamic. ABMJR said this before, but I wasn't far enough in my learning to understand. So 1. Forcing config is out 2. tftp is out. Is option 3 going after the cmts? |
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)