Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hi! Need help with sb5101 Haxorware
#1
Hi! Im needing help with this. I have uploaded config file to my new modem which is a SB5101 Haxorware 1.1 Revision 39. I would get all the lights except for the online one, but all it does is blink. I looked at the overview in the 192.168.100.1, all i got was Acquired downstream: Completed

acquire upstream completed

Acquire range or something: completed

I get stuck on obtaining an ip address.

Also, i dont know how to telnet so i would need to be enlightended on this. Im also new to the forums. So thank you!

I hope i can get help! Big Grin
Reply
#2
Okay, im back and i figured out how to tlenet in windows 7. So i will post the logs here


Haxorware integrated telnet daemon

Username: root
Password: *********
Welcome.
CM>
CM> Attempting Downstream FEC lock @ freq= 159000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 153000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 147000000 Hz, QAM64
0x00014546 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server T
hread) Callback request expired:
timerDuration secs = 1
current time secs = 83
elapsed time secs = 1
CM> Attempting Downstream FEC lock @ freq= 141000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 135000000 Hz, QAM64
Favorite[0].freq = 621
Attempting Downstream FEC lock @ freq= 621 Hz, QAM64/256
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 129000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 123000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 501000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 507000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 513000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 519000000 Hz, QAM256
iAttempting Downstream FEC lock @ freq= 525000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 531000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 537000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 543000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 549000000 Hz, QAM256
0x00016e54 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server T
hread) Callback request expired:
timerDuration secs = 1
current time secs = 93
elapsed time secs = 1
CM> iAttempting Downstream FEC lock @ freq= 555000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 561000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 567000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 573000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 579000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 585000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 591000000 Hz, QAM256
0x00019a82 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server T
hread) Callback request expired:
timerDuration secs = 1
current time secs = 105
elapsed time secs = 1
CM> iAttempting Downstream FEC lock @ freq= 597000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 603000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 609000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 615000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 621000000 Hz, QAM256
0x0001b71a [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlT
hread)
CM did not lock to target ds freq. Non-zero target us chan id
no longer applies. Setting target us to 0.
0x0001b71a [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlT
hread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 621000000 Hz
Carrier Offset = 6 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x13b00147
Power Level = 8 dB
QAM = LOCKED
FEC = LOCKED
******************************************

CM> iSelecting UCD for Us Channel 1

0x0001c02a [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (
CmDocsisCtlThread) starting ds time sync acquisition...
0x0001c2a0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtl
Thread) downstream time sync acquired...
0x0001c2a0 [CmDocsisCtlThread] BcmCmDocsisCtlThread:Big GrinsSyncOkResumeUsInit: (CmD
ocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using default initial upstream power = 8.0 dBmV
0x0001c2a0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtl
Thread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> i0x0001c692 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Ser
ver Thread) Callback request expired:
timerDuration secs = 1
current time secs = 116
elapsed time secs = 1
RNG-RSP Adj: tim=2388 power=60 freq=0 Stat=Continue
0x0001c6ec [CmDocsisCtlThread] BcmCmDocsisCtlThread::RngRspMsgEvent: (CmDocsisC
tlThread) WARNING - Calling PreRegUsChanChange! Appendix H stuff...
Deleting DOCSIS 1.0 CoS Settings for SID 0
0x0001c7be [CmDocsisCtlThread] BcmDocsisCmHalIf:Big GrineleteAllServiceFlows: (DOCSIS
CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along wit
h associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory
Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x0001c7d2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCt
lThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
CM> iSelecting UCD for Us Channel 3

0x0001cfb6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (
CmDocsisCtlThread) starting ds time sync acquisition...
0x0001d236 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtl
Thread) downstream time sync acquired...
0x0001d236 [CmDocsisCtlThread] BcmCmDocsisCtlThread:Big GrinsSyncOkResumeUsInit: (CmD
ocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using default initial upstream power = 8.0 dBmV
0x0001d240 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtl
Thread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
CM> iAdjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)
RNG-RSP Adj: tim=2388 power=60 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 36000000 Hz
Upstream Power = 48 dBmV
Ranging SID = 0x1017
Upstream Symbol Rate = 2560000 sym/sec
******************************************

Calculating maximum number of IP filters:
Each IP filter consumes 1868 bytes of RAM.
Current free RAM is 374712 bytes.
Max heap reserved for IP filters (25%) = 93678
We can support 50 IP filters.
Calculating maximum number of LLC filters:
Each LLC filter consumes 736 bytes of RAM.
Current free RAM is 374688 bytes.
Max heap reserved for LLC filters (25%) = 93672
We can support 127 LLC filters.
Starting IP Initialization with DHCP...
DHCPc: Waiting 4 seconds before sending Discover; client id htype=1, value=00:1
d:cd:65:95:a4
Not logging event ID 2307948624, control for level 7 is 0.
CM> icd /ip

Error - Unknown command: 'icd /ip'

CM> ipconfig 1 release

Error - Unknown command: 'ipconfig 1 release'

CM> y

Error - Unknown command: 'y'

CM> ipconfig 1 static 0.0.0.0 255.255.255.0 0.0.0.0

Error - Unknown command: 'ipconfig 1 static 0.0.0.0 255.255.255.0 0.0.0.0'

CM> y

Error - Unknown command: 'y'

CM> cd /

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> 0x0001eee2 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Serv
er Thread) Callback request expired:
timerDuration secs = 1
current time secs = 126
elapsed time secs = 1
CM> cd /ip

Active Command Table: IP Stack HAL Commands (ip_hal)

CM -> ip_hal

CM/IpHal> ipconfig 1 release


WARNING: This will be applied to all 2 registered instances!
Do you really want to do this? (yes|no) [no] y

Instance: IP Stack1 (0x806a0e7c)

Releasing lease for client id htype=1, value=00:1d:cd:65:95:a4
DHCPc: Releasing the lease with client id htype=1, value=00:1d:cd:65:95:a4
0x0001fe46 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 Hal
If) Removing lease IP address 0.0.0.0 from IP stack 1
0x0001fe46 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 Hal
If) This is the last address on the stack; shutting the stack down:numberOfAddre
sses=0
0x0001fe46 [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1
HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0
, Gateway=0.0.0.0
Ip addr is the same, not rebinding.

Instance: IP Stack2 (0x8069f3cc)

Releasing lease for client id htype=1, value=00:1d:cd:65:95:a4

CM/IpHal> ipconfig 1 static 0.0.0.0 255.255.255.0 0.0.0.0


WARNING: This will be applied to all 2 registered instances!
Do you really want to do this? (yes|no) [no] y

Instance: IP Stack1 (0x806a0e7c)

Configuring static lease for IP Stack1...
0x0001ff54 [ConsoleThread] BcmDhcpClientIf::ConfigureStaticLease: (DHCP ClientI
f for IP Stack1) ERROR - Static lease not acceptable to the IP stack; can't conf
igure!
ERROR - failed to configure static lease!

Instance: IP Stack2 (0x8069f3cc)

Configuring static lease for IP Stack1...
0x0001ff54 [ConsoleThread] BcmDhcpClientIf::ConfigureStaticLease: (DHCP ClientI
f for IP Stack1) ERROR - Static lease not acceptable to the IP stack; can't conf
igure!
ERROR - failed to configure static lease!

CM/IpHal> cd /

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> 0x00021b1a [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Serv
er Thread) Callback request expired:
timerDuration secs = 1
current time secs = 138
elapsed time secs = 1
CM> stop

Error - Unknown command: 'stop'

CM> Telnet 0x00024716 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DH
CP Server Thread) Callback request expired:
timerDuration secs = 1
current time secs = 149
elapsed time secs = 1
CM> Telnet stop

Error - Unknown command: 'Telnet stop'

CM> e0x00027312 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Ser
ver Thread) Callback request expired:
timerDuration secs = 1
current time secs = 160
elapsed time secs = 1
CM> e

'embedded_target' is a command table.

Type 'help embedded_target' for information about the table, or
'cd embedded_target' to change to that table.
Error - Unknown command: 'e'

CM>
Reply
#3
ERROR - Static lease not acceptable to the IP stack; can't conf
igure!
ERROR - failed to configure static lease!
Knowledge=Power
Reply
#4
(02-08-2012, 02:58 AM)ABMJR Wrote: ERROR - Static lease not acceptable to the IP stack; can't conf
igure!
ERROR - failed to configure static lease!


Not sure what that is supposed to mean.

But i can get all the lights to come on and the last light is blinking.



Reply
#5
Did you really just post a picture of a blinking online light?

Wow...
Reply
#6
(02-08-2012, 03:55 AM)southernyankey1970 Wrote: Did you really just post a picture of a blinking online light?

Wow...

LOL

Reply
#7
(02-08-2012, 03:55 AM)southernyankey1970 Wrote: Did you really just post a picture of a blinking online light?

Wow...


people can be extremely ignorant these days. I came here for help. Not blatant stupidity like yours.

So please, stick to the topic or else just keep quiet.


Reply
#8
why the need for a static ip
__________________________________________________________________________________
******new discord chat linkĀ https://discord.gg/5BQQbsb*******
Reply
#9
(02-08-2012, 12:51 PM)drewmerc Wrote: why the need for a static ip

I dont know. Thts why i came here for help.

Reply
#10
so turn it off
__________________________________________________________________________________
******new discord chat linkĀ https://discord.gg/5BQQbsb*******
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)