is there any drivers for this...

[GBABY4201]

9i got it reading not...



eCos - hal_diag_init
Init device '/dev/ttydiag'
Init tty channel: 802dfb58
Init device '/dev/tty0'
Init tty channel: 802dfb78
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: fffe0300.2
Set output buffer - buf: 80314030 len: 2048
Set input buffer - buf: 80314830 len: 2048
BCM 33XX SERIAL config
unction: SetHardcodeVendorProfile

Got Attached ProfileRawData ok

Reading Permanent settings from non-vol...
Checksum for permanent settings: 0xa0392269
Settings were read and verified.


Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0x6d145fb0
Settings were read and verified.


vvv Interface creation and driver startup beginning vvv

-> Begin DOCSIS CM WAN interface
Creating HAL object for the DOCSIS CableModem interface
Registering DOCSIS CableModem driver

INTC->RevID = 334900A0, MAX_US_QUEUES = 16, numUsQueuesConfigured = 16
-> End DOCSIS CM WAN interface

-> Begin Ethernet LAN interfaces
Creating HAL object for the Ethernet interface
Registering Ethernet driver
-> End Ethernet LAN interfaces

-> Begin USB LAN interface
Creating HAL object for the USB interface
Registering USB driver
-> End USB LAN interface

-> Begin IP Stack interfaces
-> Starting V2 DHCP Client subsystem...
Creating HAL object for IP Stack1 (MAC )
Registering IP Stack1 driver

Creating HAL object for IP Stack2 (MAC Addr=)
Registering IP Stack2 driver

IP Stack3 not enabled or failed to create and start interface; no other stacks will be loaded.
-> End IP Stack interfaces

^^^ Interface creation and driver startup complete ^^^

Propane version: 2.0.1 (28 Oct 2002)
T-LinuxAgent:AgentInitSnmp
Creating SNMP agent cablemodem agent
LX- Now in AgentStartSnmp()
LX-AgentStartSnmp:
DON'T think we need to go here - so don't:::: init_mib !!!!
WARNING: netsnmp_brcm_create_tstring called with no address!


NOT Calling VacmTest for debug users
NOT STARTING THE LOCAL snmp thread!! - must be using the v2
LX- Now in AgentStartSnmp() - finished
Creating SNMP agent CPE diag agent
LX- Now in AgentStartSnmp()
LX- Now in AgentStartSnmp() - finished
kConsoleIsReadWrite
======================> Going into VENDOR_EMBEDDED_CM_CONTROL_CM section
fpBridge is Not Null !!!
HTTP server initialization complete.


*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* * * *
* * * * * * ***
* * * * * * * * *******************
* * * * * *
* *

Broadcom Corporation Reference Design

+----------------------------------------------------------------------------+
| _/_/ _/_/_/_/ _/_/ |
| _/ _/ _/ _/ _/ Broadband |
| _/ _/ _/ _/ |
| _/_/ _/_/_/ _/ Foundation |
| _/ _/ _/ _/ |
| _/ _/ _/ _/ _/ Classes |
| _/_/_/ _/ _/_/ |
| |
| Copyright © 1999 - 2004 Broadcom Corporation |
| |
CM DHCP:Warning ! lack of option 66
DHCP completed successfully!
DHCP: IP address = 73.16.85.118

Starting Time Of Day...
Current system time -> Tue Dec 20 01:51:11 2011

System start time -> Tue Dec 20 01:50:57 2011

Starting Tftp of configuration file...
Ignoring other vendor VSIF
QoStekType43Parse~False!
[1]: -> 259 is ok
throw
Time Of Day completed...
processing 's
259 's OK.
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.
BcmCmDocsisStatusEventCodes::kCmIsOperational
BcmCmDocsisStatusEventCodes::kCmIsOperational
VendorCtrl: HFC up

---

Instance: ( 0 )Console Thread (0x807e9f0c)

! ? REM cd dir
find_command help history instances ls
man pwd sleep syntax system_time
usage
----
autoTest cfi_show close configRegion deinit
erase init open read readDirect
show write writeArray
----

CM/Flash>

---

Instance: ( 0 )Console Thread (0x807e9f0c)

! ? REM cd dir
find_command help history instances ls
man pwd sleep syntax system_time
usage
----
autoTest cfi_show close configRegion deinit
erase init open read readDirect
show write writeArray
----

CM/Flash>