Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to write cfg.bin from SB5101U to SBG6580.
#1
This will be very easy to understand only if you have blackcatUSB.exe
Here is what you need first!

1.SB5101U
2.SGB6580
3.BlackCatUSB Jtag
4.on Both unit you need to be able to jtag read and write.
note: both unit means (SB5101U and SGB6580)

SO how you write certs or config file from SBG5101U to SGB6580....

1. Read CFG file from SG6580 using script SB5101U. (Use Script SB5101U for this step)
2. Then Write 6580.cfg on SB5101U cfg file. (Use Script SB5101U for this step)
3. Update SB5101-U with Haxorware Diag.
4.Remove the Jtag and Turn The SB5101U ON!
5 Use Addres section to write Specific HFC Mac (Save then Save and Reboot).
6 Then update working Config file SB5101U by using Menu opition Config.
7. Now you have to Connect Jtag to SB5101U to read CFG File.
8 Then Connect Jtag to SGB6580 and write cfg file from SB5101U. (Use Script SB5101U for this step)
Remove all jtags. then connect as normal and enjoy your Internet Smile
WITH THIS STEPS YOUR WIRELESS WILL WORK TOO!
I havent tried with SB5101, or SB5100.
Please let me know how it works, if its even working ? He He.
Thanks!
Reply
#2
dude your method don't make sense.
Reply
#3
Here is the proof take the time read and try understand Smile
And I dont think so if any 6580 Modem starts with MAc 00: etc.....
IF your not using BlackCat USB Jtag, it wont make sense to you for sure!!
Checkout the picture!!!!
Long to Short, Your just using SB5101U modem to do the checksum for your SBG6580 cfg.bin

Thanks!

(06-11-2011, 03:24 AM)jackass Wrote: dude your method don't make sense.



Attached Files Thumbnail(s)
   
Reply
#4
looks convoluted but if it works who am i to complain, good work
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#5
I would say my grama problem,lol but works at the end !

(06-11-2011, 04:18 PM)drewmerc Wrote: looks convoluted but if it works who am i to complain, good work


Here is the diagram how it works, hope you guys will understand what I did!

Thanks again
Enjoy Smile


Attached Files Thumbnail(s)
   
Reply
#6
Nice post thanks!
I have full dump and cfg of SBG6580.
There is any way of use this cfg on SB6120 ?
Reply
#7
all depends on what the size of the cfg is (tho you could just use nonvol explorer to extract the certs and inject them into the sb6120)
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#8
Good idea, the problem is that the cfg of SB6580 is 64kb.
no way to put you directly in the nvram of sb6120?
Reply
#9
what is the size of the nonvol you want to use as most of the time it's just the same 32k twice
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#10
how do you start blackcat on Windows 7 64bit???
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)