Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
strange thing happen to sb5101 rebooting or just steady light
#1
first i like to thank everyone here in this forum im new to it. thank you in advance. im mode on other hobbies forums lol . i know poeple they dont like newbies.Tongue

i used 5101 Haxorware
Version 1.1 Revision 30 for over 2 years no problem . i unplagued it for some reason and after that it keeps rebooting i was not able to get internet . i changed many macs i was not sure if they r or not valid . the modem reboot with some macs but with some keep steady all 4 lights but can noy have access to the internet .
this is some of my logs:


1970-01-01 00:00:09 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:09 Notice M572.0 Ds Lock Failed - Reinitialize MAC...
1970-01-01 00:00:09 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:08 Notice M572.0 Ds Lock Failed - Reinitialize MAC...
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-31 01:25:08 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-31 01:25:08 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-31 01:24:17 Notice M573.0 Modem Is Shutting Down and Rebooting...

please help me . i will help u if someone is intersted in the hubbies which i master if u pm me i will tell you .Big Grin

thank you and i do appreciate your time reading this thread .
Reply
#2
Post a TELNET log...
Knowledge=Power
Reply
#3
lol in my hax i see event log . if this is what is . if not please where to go to get elnet thank you .


Time Priority Code Description
1970-01-01 00:00:05 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 00:01:56 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:56 Notice M573.0 Modem Is Shutting Down and Rebooting...
1970-01-01 00:01:55 Critical Resetting the cable modem due to docsDevResetNow
1970-01-01 00:00:05 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:13 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 00:06:58 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:06:58 Notice M573.0 Modem Is Shutting Down and Rebooting...
1970-01-01 00:06:57 Critical Resetting the cable modem due to docsDevResetNow
1970-01-01 00:00:09 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:09 Notice M572.0 Ds Lock Failed - Reinitialize MAC...
1970-01-01 00:00:09 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:08 Notice M572.0 Ds Lock Failed - Reinitialize MAC...
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-31 01:25:08 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-31 01:25:08 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-31 01:24:17 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-31 01:24:17 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:18 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-31 01:23:19 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-31 01:23:19 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:23 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:14 Critical R002.0 No Ranging Response received - T3 time-out (US 2)
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 00:00:39 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:39 Notice M573.0 Modem Is Shutting Down and Rebooting...
1970-01-01 00:00:39 Critical Resetting the cable modem due to docsDevResetNow
1970-01-01 00:00:05 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 00:00:05 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-03-31 01:21:19 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-31 01:21:19 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
2012-03-31 01:21:02 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:27 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:15 Critical R002.0 No Ranging Response received - T3 time-out (US 2)
1970-01-01 00:00:05 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 00:00:05 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:07:32 Notice M573.0 Modem Is Shutting Down and Rebooting...
1970-01-01 00:07:32 Critical Resetting the cable modem due to docsDevResetNow
1970-01-01 00:06:27 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:06:27 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:04 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:19 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-03-30 06:54:35 Warning D103.0 DHCP RENEW WARNING - Field invalid in response
1970-01-01 00:01:11 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:01:06 Critical R002.0 No Ranging Response received - T3 time-out (US 2)
1970-01-01 00:00:54 Error D004.3 ToD request sent- No Response received
1970-01-01 00:00:54 Critical D006.0 TFTP failed - configuration file NOT FOUND
1970-01-01 00:00:53 Notice M572.0 T4 No Station Maint Timeout - Reinitialize MAC...
1970-01-01 00:00:53 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:32 Error D004.3 ToD request sent- No Response received
1970-01-01 00:00:27 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:16 Critical R002.0 No Ranging Response received - T3 time-out (US 2)
1970-01-01 00:00:04 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 00:00:04 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-03-30 06:20:38 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-30 06:20:38 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:13 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-30 06:19:48 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-30 06:19:48 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:12 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-30 06:18:58 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-30 06:18:58 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:22 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:13 Critical R002.0 No Ranging Response received - T3 time-out (US 2)
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-30 06:17:46 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-30 06:17:46 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-30 06:16:53 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-30 06:16:53 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:12 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-30 06:16:03 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-30 06:16:03 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
2012-03-30 06:15:13 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-03-30 06:15:13 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:02:26 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:02:21 Critical R002.0 No Ranging Response received - T3 time-out (US 2)
1970-01-01 00:02:16 Critical R002.0 No Ranging Response received - T3 time-out (US 3)
1970-01-01 00:02:11 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:53 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:52 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:49 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:48 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:47 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:47 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
Reply
#4
1970-01-01 00:07:32 Critical Resetting the cable modem due to docsDevResetNow

Fix this and all will be fine...
Knowledge=Power
Reply
#5
(31-03-2012, 05:20 AM)ABMJR Wrote: 1970-01-01 00:07:32 Critical Resetting the cable modem due to docsDevResetNow

Fix this and all will be fine...

i know u r genius in this field but me its like first grad. could you guide me . where to go or what to do . or where to read about this fix . how the docsdevresetnow can be fixed /
Reply
#6
Your BPI + now, needs certs and a CVC co signed...

There really isnt anything to point you to to fix this..

Most is not posted anymore...

Maybe try a new bin file...

But, new security has you done M8
Knowledge=Power
Reply
#7
thank you very much .i did find this by someone i did not understand what he meant by xxx


copy/past:

heres what i did to get my 5101 v39 running in WPB, FL. i also did it on v32 .

in this order (unplug coaxial and plug directly to modem. no router):
1. goto Haxorware GUI > factory default > factory revert
2. haxorware file manager > anything there click delete. then above that click defragment.
3. now you are back to scratch.
4. goto haxorware settings > check boxes: Disable Firmware Upgrades, Force Network Access, Tftp Enforce Bypass, Disable IP Filters on startup, Ignore T4 (Station Maintenance). CLICK SAVE not reboot.
5.IMPORTANT : Address > enter in the XXX on the sticker of modem (use BPI 1.1 if you use orig XXX...OR...use BPI 1.0 if you use a different XXX....some areas you have to use bpi+bypass). CLICK SAVE not reboot and it will create certs for the modem.
6. Config File > LEAVE IT BLANK (some places you cant force config)
7. BAseline Privacy > use BPI 1.1 if you use orig XXX...OR...use BPI 1.0 if you use a different XXX
8. STEALTH > use whichever one youre supposed to be using (i use 6120 spoof because isp automatically gives me d_11_6120_c01.cm)
Vendor: Motorola
Model: SB6120
Software Version: SB6120-1.0.2.3-SCM00-NOSH (some places have higher software version...but try this one i used)
CLICK SAVE.
NOW reboot modem.

9. then plug in the coxaxial and wait about 2-5 minutes to let the modem cycle through...you should see that once it soes what it needs to do, you'll have all 4 solid lights and flashing orange light.
Reply
#8
lol

That's ancient. 18 months ago or so. Useful only if you can swap macs and run docsis 1.0

You used to be able to run d3 cfgs on a d2 cm before d3 was fully implemented. D3 security can be pretty much perfect if all of the features are integrated correctly.
Reply
#9
Most ISP's are BPI + 1.1 now...I agree. Those steps are old and useless.

I h8 to say this, but your done M8.
Knowledge=Power
Reply
#10
in the area where im north east i was told we can not enforce config file and the bpi+ in my modem was always disabled.
(31-03-2012, 06:09 PM)ABMJR Wrote: Most ISP's are BPI + 1.1 now...I agree. Those steps are old and useless.

I h8 to say this, but your done M8.

thanx for your concern all the times. Smile what is your done M8??? THIS WAY IM IN SAME PAGE
is this security mesure applied by some provider or all provider . if i subscribe with different provider and reset my modem to that provider will my modem work?

can i fix this getting mac and cert from a different legit modem not in my nodes.? if so what to look for in that modem ? thanx guys .
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)