Haxorware Forums › General › Modems v
Trouble connecting to Internet- DPC2100R2

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
Trouble connecting to Internet- DPC2100R2
ABMJR Away
DOCSIS Genius
*****
Posts: 1,516
Threads: 16
Joined: Dec 2009
Reputation: 79
#11
20-01-2012, 10:31 PM
Ahh...

BPI + is now forced...

2012-01-20 21:27:07 Critical Resetting the cable modem due to docsDevResetNow
Knowledge=Power
Find
Reply
skribblz Offline
Senior Member
****
Posts: 127
Threads: 0
Joined: Sep 2011
Reputation: 10
#12
20-01-2012, 11:29 PM
Pay for a sub, cause this is obviously to hard for you. No one is going to spoon feed, especially this time around now. Good luck
No I will not help you if only have a few worthless post on the forum.
Find
Reply
sayonee Offline
Junior Member
**
Posts: 15
Threads: 2
Joined: Sep 2011
Reputation: 0
#13
21-01-2012, 11:02 AM (This post was last modified: 21-01-2012, 11:06 AM by sayonee.)
(20-01-2012, 11:29 PM)skribblz Wrote: Pay for a sub, cause this is obviously to hard for you. No one is going to spoon feed, especially this time around now. Good luck

Ok friends sorry for this ..I am working and studying Der's Ebook (pages 42,67......)and I am trying to analyze with whatever I have in hand ...I need to understand the telnet log ..well I tried to login into modem and I saw the messages ...



Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x0005c210 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) ERROR -
REG-RSP response code NOT ok! rsp code = 1 (kRejOther)
0x0005c210 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 17 (kNegOrBadRegRsp)
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
Not logging event ID 2436694040, control for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x220
0x0005c2d8 [CmDocsisCtlThread] BcmDocsisCmHalIf:Big GrineleteAllServiceFlows: (DOCSIS
CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.



The status of the modem while registering it on CMTS is "waiting" and this could be the reason ..I am not able to register it on server..

Status for everything else shows as done ..I am able to receive the config file and my own config file is autoserved ..Security negotiation status is also done ....but the scanning again starts and this goes into a loop

Yeah it would be certainly too hard but theres nothing wrong for an average guy like me to learn and implement ...I guess that's the reason everyone is here for...

Thanks and please PM to me if you don't like to post here as a reply

Thanks again
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#14
21-01-2012, 11:23 AM
Code:
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x0005c210 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) ERROR -
REG-RSP response code NOT ok! rsp code = 1 (kRejOther)
0x0005c210 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 17 (kNegOrBadRegRsp).
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...

that is your response from the ctms simply put it's saying no, and your modems response to that is

Code:
0x0005c2d8 [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS
CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...

without the rest of the telnet log we can only guess why but i'll bet all my money (£3.14 damn i'm skint) that it is bpi
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
sayonee Offline
Junior Member
**
Posts: 15
Threads: 2
Joined: Sep 2011
Reputation: 0
#15
21-01-2012, 07:12 PM
Ok Drew I have posted the log with changes in the address and I did it in hurry ... sorry about this hope atleast something will be revealed..I am trying hard to look about BPI+ ...its implementation & ways to tackle it anyways thanks for the hint ....hope there are enough tuts and info on this forum regarding this.....Please let me know incase I am missing something....thanks again to you all


Code:
Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x00051de2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:  (CmDocsisCt
lThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
CM> Selecting UCD for Us Channel 3

0x000529e0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync:  (
CmDocsisCtlThread) starting ds time sync acquisition...
0x00052c56 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk:  (CmDocsisCtl
Thread) downstream time sync acquired...
0x00052c56 [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit:  (CmD
ocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 42.0 dBmV
0x00052c56 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk:  (CmDocsisCtl
Thread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control  for level 7 is 0.
RNG-RSP  Adj: tim=1945 power=0 freq=0  Stat=Continue
RNG-RSP  Adj: tim=0 power=0 freq=0  Stat=Success

******************************************
            UPSTREAM STATUS
******************************************
       Upstream Status = UP
      Upstream Channel = 3
    Upstream Frequency = 38000000 Hz
        Upstream Power = 42 dBmV
           Ranging SID = 0x220
  Upstream Symbol Rate = 1280000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc:  Waiting 3 seconds before sending Discover; client id htype=1, value=ip:kk:vc:ui:lo
Not logging event ID 2307948624, control  for level 7 is 0.
CM> DHCPc:  Sending Discover packet; client id htype=1, value=xx:yy:aa:zz
DHCPc:  Received an Offer from DHCP server qq:ww:ee:rr (ew:rt:tg:yy); lease
client id htype=1, value=xx:yy:aa:zz
CM> 0x0005431c [DHCP Server Thread] BcmDhcpServerThread::ThreadMain:  (DHCP Serv
er Thread) Callback request expired:
timerDuration secs = 1
current time secs = 344
elapsed time secs = 1
CM> DHCPc:  Timed out waiting for offers for lease with client id htype=1, value
=xx:yy:aa:zz
DHCPc:  Sending Request packet; client id htype=1, value=xx:yy:aa:zz
DHCPc:  Received an Ack from DHCP server qq:ww:ee:rr (ew:rt:tg:yy); lease c
lient id htype=1, value=xx:yy:aa:zz
Current IP address is default 0.0.0.0.
0x000548da [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl:  (IP Stack1
HalIf)
Configuring IP stack 1:
  IP Address = mm:jk:hj:op (primary IP address)
   Subnet Mask = dff:rff:tg:tg
   Router = ew:rt:tg:yy
   IsPrimaryInterface = 1

ARPing for default GW IP = ew:rt:tg:yy
MAC = qq:ww:ee:rr
DHCP completed successfully!

DHCP Settings:
                     Client Id = htype=1, value=xx:yy:aa:zz
                         State = Renewing (5)
                  Static Lease = 0
               AutoConfig Mode = IP, Subnet and Router
                           XID = 0x124a6973
               Number of Tries = 0
            Max Discover Tries = 6
             Max Request Tries = 6
          DHCP server MAC addr = qq:ww:ee:rr
                   Ignore NAKs = 0
         My offered IP address = mm:jk:hj:op (primary IP address)
               (1) Subnet Mask = dff:rff:tg:tg
         (3) Router IP address = ew:rt:tg:yy
   (54) DHCP Server IP address = ol:iu:oi:pp
   (82) Relay Agent IP address = ew:rt:tg:yy
        TFTP Server IP address = ol:iu:oi:pp
         CM Configuration file = '~wKgFATTRwDmai+1NCdwu6M+SZYImPMvK0kL6uusnrGphD
ZiR'
           (2) UTC Time Offset = 19800 seconds
    (4) Time Server IP address = ol:iu:oi:pp
        (6) Domain Name Server = sx:lo:km:kj; sx:ed:rf:yh
     (7) Log Server IP address = ol:iu:oi:pp
               (51) Lease time = 604800 seconds
               (58) T1 (renew) = 302400 seconds
              (59) T2 (rebind) = 529200 seconds
             Lease is infinite = 0


SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=mm:jk:hj:op, Subnet=ed:ol:ij:yt, Gateway=ew:rt:tg:yy
  CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Suppor
t
    IP addr = mm:jk:hj:op
Starting Time Of Day...
0x00054970 [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress:
(Time Of Day Thread) ToD servers:  ol:iu:oi:pp
Connecting to ToD server ol:iu:oi:pp...
Sending UDP ToD request to server...
SNMP Agent Binding to mm:jk:hj:op:225
Not logging event ID 2291949724, control  for level 7 is 0.
CM> UTC returned by ToD server 3536121045; UTC offset 19800
Current system time -> Sat Jan 21 13:20:45 2012

System start time -> Sat Jan 21 13:14:59 2012

Starting Tftp of configuration file...
Opening file '~wjsdf3JKSDF-ak32jkla9JMNlkajdl9jsdklfj+ksdjf12kjskdjfUIjlkjsrt' on df:tr:bn:mv
0 for reading...
tftp-enforce bypass is using ol:iu:oi:pp:~wKgFATTRwDmai+1NCdwu6M+SZYImPMvK0kL6
uusnrGphDZiR
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass succeeded.File was 60 bytes
TFTPD Started
CM> Forcing Config TFTP IP to 127.0.0.1
Forcing Config File name to  ~hkjsdhHKJHk+ksjdKLSDJksjdsjdlkfksjd12lkj5lkas89jkaskljasdl
TFTPD received 1 from mm:jk:hj:op:1077
Storing received cfg of size 60 to memory
TFTPD Shut down
Tftp transfer complete!
TFTP Settings:
            Stack Interface = 1
          Server Ip Address = ol:iu:oi:pp
         Server Port Number = 1078
          Total Blocks Read = 1
           Total Bytes Read = 60

Config file was read!  IP Initialization completed...
MAX CPE per CM is being set to 32
Time Of Day completed...
  DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Facto
ry Support
Sending a REG-REQ to the CMTS...
Not logging event ID 2291949524, control  for level 7 is 0.
Not logging event ID 2291949324, control  for level 7 is 0.
Received a REG-RSP message from the CMTS...
0x00054da8 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent:  (CmDocsisC
tlThread) ERROR -
        REG-RSP response code NOT ok!  rsp code = 1 (kRejOther)
0x00054da8 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent:  (Cm
DocsisCtlThread)  reason: 17 (kNegOrBadRegRsp)
Not logging event ID 2436694040, control  for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x220
0x00054e70 [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:  (DOCSIS
CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along wit
h associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc:  Releasing the lease with client id htype=1, value=xx:yy:aa:zz
DHCPc:  Sending Release packet; client id htype=1, value=xx:yy:aa:zz
0x00054e7a [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket:  (DHCP ClientIf
for IP Stack1) WARNING - Failed to send packet!
0x00054e7a [DHCP Client Thread] BcmDhcpClientIf::SendRelease:  (DHCP ClientIf fo
r IP Stack1) WARNING - Failed to create/send Release packet!  Oh, well, no biggi
e...
0x00054e84 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 Hal
If) Removing lease IP address mm:jk:hj:op from IP stack 1
0x00054e84 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 Hal
If) This is the last address on the stack; shutting the stack down:numberOfAddre
sses=1
0x00054e84 [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl:  (IP Stack1
HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0
, Gateway=0.0.0.0
  DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory
Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x00054f7e [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:  (CmDocsisCt
lThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x00054f7e [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:
  (Scan Downstream Thread) Downstream Channel scan stopped!
0x00054f92 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:
  (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 853750000 Hz, QAM64
CM> Found energy at frequency 853750000Hz!  Publishing event kEventEnergyDetecte
d...
Attempting Downstream FEC lock @ freq=  91750000 Hz, QAM64
Attempting Downstream FEC lock @ freq=  97750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 103750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 109750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 115750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 493750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 487750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 481750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 475750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 469750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 463750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 457750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 451750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 445750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 439750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 433750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 427750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 421750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 415750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 409750000 Hz, QAM64
0x00056e32 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain:  (DHCP Server T
hread) Callback request expired:
timerDuration secs = 1
current time secs = 355
elapsed time secs = 1
Attempting Downstream FEC lock @ freq= 403750000 Hz, QAM64
CM> Attempting Downstream FEC lock @ freq= 397750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 391750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 385750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 379750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 373750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 367750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 361750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 355750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 349750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 343750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 337750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 331750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 325750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 319750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 313750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 307750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 301750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 295750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 289750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 283750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 277750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 271750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 265750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 259750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 253750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 247750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 241750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 235750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 229750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 223750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 217750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 211750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 205750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 199750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 193750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 187750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 181750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 175750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 169750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 163750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 157750000 Hz, QAM64
Favorite[0].freq = 441000000
Attempting Downstream FEC lock @ freq= 441000000 Hz, QAM64/256
0x0005993e [DHCP Server Thread] BcmDhcpServerThread::ThreadMain:  (DHCP Server T
hread) Callback request expired:
timerDuration secs = 1
current time secs = 366
elapsed time secs = 1
0x000599f2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit:  (CmDocsisCtlT
hread) Locked on the downstream.  Waiting for UCDs...

******************************************
            DOWNSTREAM STATUS
******************************************
  Tuner Frequency = 441000000 Hz
   Carrier Offset = -1 Hz
      Symbol rate = 5360537 sym/sec
              SNR = 40 dB
         QAM Mode = QAM256
        Tuner AGC = 0xfff00000
           IF AGC = 0x10cd7a3d
      Power Level = 17 dB
              QAM = LOCKED
              FEC = LOCKED
******************************************

CM> Selecting UCD for Us Channel 3

0x0005a690 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync:  (
CmDocsisCtlThread) starting ds time sync acquisition...
0x0005a910 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk:  (CmDocsisCtl
Thread) downstream time sync acquired...
0x0005a91a [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit:  (CmD
ocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 42.0 dBmV
0x0005a91a [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk:  (CmDocsisCtl
Thread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control  for level 7 is 0.
RNG-RSP  Adj: tim=1943 power=0 freq=0  Stat=Continue
RNG-RSP  Adj: tim=0 power=0 freq=0  Stat=Success

******************************************
            UPSTREAM STATUS
******************************************
       Upstream Status = UP
      Upstream Channel = 3
    Upstream Frequency = 38000000 Hz
        Upstream Power = 42 dBmV
           Ranging SID = 0x220
  Upstream Symbol Rate = 1280000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc:  Waiting 1 seconds before sending Discover; client id htype=1, value=ip:ol:kk:vc:ui:lo
Not logging event ID 2307948624, control  for level 7 is 0.
CM> DHCPc:  Sending Discover packet; client id htype=1, value=xx:yy:aa:zz
DHCPc:  Received an Offer from DHCP server qq:ww:ee:rr (ew:rt:tg:yy); lease
client id htype=1, value=xx:yy:aa:zz
CM> DHCPc:  Timed out waiting for offers for lease with client id htype=1, value
=xx:yy:aa:zz
DHCPc:  Sending Request packet; client id htype=1, value=xx:yy:aa:zz
DHCPc:  Received an Ack from DHCP server qq:ww:ee:rr (ew:rt:tg:yy); lease c
lient id htype=1, value=xx:yy:aa:zz
Current IP address is default 0.0.0.0.
0x0005bd2e [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl:  (IP Stack1
HalIf)
Configuring IP stack 1:
  IP Address = mm:jk:hj:op (primary IP address)
   Subnet Mask = dff:rff:tg:tg
   Router = ew:rt:tg:yy
   IsPrimaryInterface = 1

ARPing for default GW IP = ew:rt:tg:yy
MAC = qq:ww:ee:rr
DHCP completed successfully!

DHCP Settings:
                     Client Id = htype=1, value=xx:yy:aa:zz
                         State = Renewing (5)
                  Static Lease = 0
               AutoConfig Mode = IP, Subnet and Router
                           XID = 0x124a6975
               Number of Tries = 0
            Max Discover Tries = 6
             Max Request Tries = 6
          DHCP server MAC addr = qq:ww:ee:rr
                   Ignore NAKs = 0
         My offered IP address = mm:jk:hj:op (primary IP address)
               (1) Subnet Mask = dff:rff:tg:tg
         (3) Router IP address = ew:rt:tg:yy
   (54) DHCP Server IP address = ol:iu:oi:pp
   (82) Relay Agent IP address = ew:rt:tg:yy
        TFTP Server IP address = ol:iu:oi:pp
         CM Configuration file = '~wKgFATTRwDmai+1NCdwu6M+SZYImPMvK0kL6uusnrGphD
ZiR'
           (2) UTC Time Offset = 19800 seconds
    (4) Time Server IP address = ol:iu:oi:pp
        (6) Domain Name Server = sx:lo:km:kj; sx:ed:rf:yh
     (7) Log Server IP address = ol:iu:oi:pp
               (51) Lease time = 604800 seconds
               (58) T1 (renew) = 302400 seconds
              (59) T2 (rebind) = 529200 seconds
             Lease is infinite = 0


SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=mm:jk:hj:op, Subnet=fr:ik:oi:fe, Gateway=ew:rt:tg:yy
  CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Suppor
t
    IP addr = mm:jk:hj:op
Starting Time Of Day...
0x0005bdce [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress:
(Time Of Day Thread) ToD servers:  ol:iu:oi:pp
Connecting to ToD server ol:iu:oi:pp...
Sending UDP ToD request to server...
SNMP Agent Binding to mm:jk:hj:op:225
Not logging event ID 2291949724, control  for level 7 is 0.
CM> UTC returned by ToD server 3536121075; UTC offset 19800
Current system time -> Sat Jan 21 13:21:15 2012

System start time -> Sat Jan 21 13:14:59 2012

Starting Tftp of configuration file...
Opening file '~wjsdf3JKSDF-ak32jkla9JMNlkajdl9jsdklfj+ksdjf12kjskdjfUIjlkjsrt' on df:tr:bn:mv
0 for reading...
tftp-enforce bypass is using ol:iu:oi:pp:~wKgFATTRwDmai+1NCdwu6M+SZYImPMvK0kL6
uusnrGphDZiR
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass succeeded.File was 60 bytes
TFTPD Started
Forcing Config TFTP IP to 127.0.0.1
Forcing Config File name to  ~hkjsdhHKJHk+ksjdKLSDJksjdsjdlkfksjd12lkj5lkas89jkaskljasdl
TFTPD received 1 from mm:jk:hj:op:1084
Storing received cfg of size 60 to memory
TFTPD Shut down
Tftp transfer complete!
TFTP Settings:
            Stack Interface = 1
          Server Ip Address = ol:iu:oi:pp
         Server Port Number = 1085
          Total Blocks Read = 1
           Total Bytes Read = 60

Config file was read!  IP Initialization completed...
MAX CPE per CM is being set to 32
Time Of Day completed...
  DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Facto
ry Support
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x0005c210 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent:  (CmDocsisC
tlThread) ERROR -
        REG-RSP response code NOT ok!  rsp code = 1 (kRejOther)
0x0005c210 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent:  (Cm
DocsisCtlThread)  reason: 17 (kNegOrBadRegRsp)
Not logging event ID 2291949524, control  for level 7 is 0.
Not logging event ID 2291949324, control  for level 7 is 0.
Not logging event ID 2436694040, control  for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x220
0x0005c2d8 [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:  (DOCSIS
CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along wit
h associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc:  Releasing the lease with client id htype=1, value=xx:yy:aa:zz
DHCPc:  Sending Release packet; client id htype=1, value=xx:yy:aa:zz
0x0005c2e2 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket:  (DHCP ClientIf
for IP Stack1) WARNING - Failed to send packet!
0x0005c2e2 [DHCP Client Thread] BcmDhcpClientIf::SendRelease:  (DHCP ClientIf fo
r IP Stack1) WARNING - Failed to create/send Release packet!  Oh, well, no biggi
e...
0x0005c2e2 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 Hal
If) Removing lease IP address mm:jk:hj:op from IP stack 1
0x0005c2ec [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 Hal
If) This is the last address on the stack; shutting the stack down:numberOfAddre
sses=1
0x0005c2ec [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl:  (IP Stack1
HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0
, Gateway=0.0.0.0
CM>   DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Fac
tory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x0005c3e6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:  (CmDocsisCt
lThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x0005c3e6 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:
  (Scan Downstream Thread) Downstream Channel scan stopped!
0x0005c3fa [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:
  (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 151750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 145750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 139750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 133750000 Hz, QAM64
0x0005c5bc [DHCP Server Thread] BcmDhcpServerThread::ThreadMain:  (DHCP Server T
hread) Callback request expired:
timerDuration secs = 1
current time secs = 378
elapsed time secs = 1
Attempting Downstream FEC lock @ freq= 127750000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 121750000 Hz, QAM64
CM> Attempting Downstream FEC lock @ freq= 499750000 Hz, QAM256
Found energy at frequency 499750000Hz!  Publishing event kEventEnergyDetected...

Attempting Downstream FEC lock @ freq= 505750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 511750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 517750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 523750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 529750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 535750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 541750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 547750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 553750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 559750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 565750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 571750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 577750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 583750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 589750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 595750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 601750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 607750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 613750000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 619750000 Hz, QAM256

Find
Reply
ABMJR Away
DOCSIS Genius
*****
Posts: 1,516
Threads: 16
Joined: Dec 2009
Reputation: 79
#16
21-01-2012, 08:16 PM
There are no tutorials friend as that would allow any ISP the chance to "fix" what works...

Your in a BPI + forced area..

Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Knowledge=Power
Find
Reply
sayonee Offline
Junior Member
**
Posts: 15
Threads: 2
Joined: Sep 2011
Reputation: 0
#17
22-01-2012, 01:30 PM
(21-01-2012, 08:16 PM)ABMJR Wrote: There are no tutorials friend as that would allow any ISP the chance to "fix" what works...

Your in a BPI + forced area..

Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...

Ok Bro but what about Certs ...I guess I had just flashed a sub without even thinking about it ....Do you think installing the certs would help..Sorry about being so naive ..thought BPI bypass would help but it didn't

Thanks
Find
Reply
ABMJR Away
DOCSIS Genius
*****
Posts: 1,516
Threads: 16
Joined: Dec 2009
Reputation: 79
#18
22-01-2012, 04:45 PM
BPI Bypass is long gone on many D2 & D3 Systems...

BPI + is VeriSign certificates, but your NODE is closed and nothing, short of a TELNET trick will work..
Knowledge=Power
Find
Reply
southernyankey1970 Away
Retired!
*****
Posts: 1,483
Threads: 24
Joined: May 2010
Reputation: 65
#19
22-01-2012, 06:05 PM
Only telnet will help you now. You need to study a sub logon to find out what you are missing to get past the closed node. It's a total pita to do....trust me. Oh yeah, if you gt it working..do not log on to ***** with it....lol. it'll die in hours.
Find
Reply
jackass Offline
Banned
Posts: 59
Threads: 0
Joined: Sep 2011
#20
23-01-2012, 03:04 PM (This post was last modified: 23-01-2012, 03:05 PM by jackass.)
(19-01-2012, 09:56 AM)sayonee Wrote: Hello there I am trying to connect to the internet using a DPC2100R2( Scientific Atlanta)haxorware installed modem.I have successfully uploaded the config file with the desired Download & Upload speeds.

But if I try connecting to the internet it fails.I have tried to access the information from the overview link available from the URL- http://192.168.100.1 and I get messages like trying..scanning... and eventually the internet just doesn't work.

Is there a way the ISP can find out about the firmware in the modem and is there a way the ISP can come to know the make of the modem??

If I try deleting the haxorware config file and the autoserve config file then,the new config file obtained from the ISP server contains the old default values and the modem works and I am able to connect to the Internet.

But as just described above If I try uploading my own modified config file the modem just fails to connect to the internet!!

Is there anything that I am missing?? about how to correctly load the config file?? or any other setting in Haxorware??. I was able to connect to the Internet using my own config file for almost 6 months,but now since I had disconnected the Internet this issue has come up....

Please let me know if there is a way to put the modem back online using the modified config file.

Thanks

You are in BPI + with tftp enforce now. So you cannot anymore force your own faster config. I believe what you have now is just your normal tier that is sub to that modem mac address, if it's even your own sub. If you want to have faster speed , then you need to pay more to have faster speed or you need to look for faster prov cert not from your node but near you.
Find
Reply


Forum Jump:


Users browsing this thread: 6 Guest(s)