Haxorware Forums › General › Modems v
usb-blackcat help..

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
usb-blackcat help..
GBABY4201 Offline
Senior Member
****
Posts: 154
Threads: 27
Joined: Nov 2011
Reputation: 5
#1
09-12-2011, 02:50 AM
this was working then it wont down i tryed new avr and stuff and im fucking mad now... what wood i use for the 5100 modem setup???
what avr??? i have the one with the 32k flash...
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#2
09-12-2011, 02:56 AM
start blackcat software plug the usb end in and make sure both dip switches are on the same side then press the reset button
so it go's into dfu mode and flash it with a different hex (if you have it in ejtag flash the nand hex or whatever)
after flashing dont click load program, unplug the dongle move both dip switches and restart the software (try doing different combos of this as it what i have to do when i reflash mine)
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
GBABY4201 Offline
Senior Member
****
Posts: 154
Threads: 27
Joined: Nov 2011
Reputation: 5
#3
09-12-2011, 03:00 AM (This post was last modified: 09-12-2011, 03:07 AM by GBABY4201.)
(09-12-2011, 02:56 AM)drewmerc Wrote: start blackcat software plug the usb end in and make sure both dip switches are on the same side then press the reset button
so it go's into dfu mode and flash it with a different hex (if you have it in ejtag flash the nand hex or whatever)
after flashing dont click load program, unplug the dongle move both dip switches and restart the software (try doing different combos of this as it what i have to do when i reflash mine)

its got me mad man...
(09-12-2011, 03:00 AM)GBABY4201 Wrote:
(09-12-2011, 02:56 AM)drewmerc Wrote: start blackcat software plug the usb end in and make sure both dip switches are on the same side then press the reset button
so it go's into dfu mode and flash it with a different hex (if you have it in ejtag flash the nand hex or whatever)
after flashing dont click load program, unplug the dongle move both dip switches and restart the software (try doing different combos of this as it what i have to do when i reflash mine)

its got me mad man...

i keep getting a error in sb5100 script.bcs on line 22... errrr wtf
Find
Reply
GBABY4201 Offline
Senior Member
****
Posts: 154
Threads: 27
Joined: Nov 2011
Reputation: 5
#4
09-12-2011, 07:54 PM
keep getting a error in sb5100 script.bcs on line 22...
reason: in CFGFLASH y is this??
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#5
09-12-2011, 10:35 PM
what version blackcat software are you using? update to latest
or open sb5100.bcs in notepad and compare it to the one below (sb5100.bcs is in the scripts folder)

Code:
# Script file for BCM3349 (SB5100) - 334817F
# This script is automatically executed when BlackcatUSB
# reads the CPU ID that the SB5100 uses. Which is 0x334817F.

MyDevice = "Motorola SB5100"    #Name of device
BootSize = 32768        #Size of bootloader (in bytes)
ImgFile = "images\Motorola.gif" #Location of the logo

JTAG.MemoryAddress(0x0)
JTAG.MemoryType("RAM")
JTAG.MemorySize(0x800000)
CFGMEM = JTAG.MemoryInit()
JTAG.MemoryAddress(0x1FC00000)
JTAG.MemoryType("CFI")
CFGFLASH = JTAG.MemoryInit()

#removed this to gain performance. If you have reading issues, uncomment
#SetParam(3,0)            #Sets read delay to 0
SetParam(4,1)            #Sets read mode to 1
SetParam(2,220)            #Sets the AMD flash delay to 200

Legacy.SetFlash(CFGFLASH)
MYFIRMNAME = Legacy.GetFwName()

t1 = Tab.Create(MyDevice)
Tab(t1).AddGroup("Bootloader",10,10,420,54)
Tab(t1).AddGroup("Firmware",10,70,420,70)
Tab(t1).AddText("MSG1","This changes the default bootloader",20,36)
Tab(t1).AddButton("ReadBoot","Read",250,30)
Tab(t1).AddButton("WriteBoot","Write",340,30)
Tab(t1).AddText("FWTITLE","Currently installed:",18,100)
Tab(t1).AddText("FW",MYFIRMNAME,18,114)
Tab(t1).AddButton("SaveFirmware","Save",250,106)
Tab(t1).AddButton("WriteFirmware","Change",340,106)
Tab(t1).AddImage("LOGO",ImgFile,45,240)

CreateEvent(ReadBoot)    #This reads the bootloader
    Status("Reading the SB5100 Bootloader")
        Tab(t1).ButtonDisable()
    MyData = Memory(CFGFLASH).Read(0,BootSize,False)
    Prompt = "Choose filename to save bootloader"    
    SaveFile(MyData,Prompt,"SB5100.Bootloader.bin")
    Status("Successfully read bootloader from Flash")
        Tab(t1).ButtonEnable()
EndEvent

CreateEvent(WriteBoot)
        Tab(t1).ButtonDisable()
    Prompt = "Choose a bootloader to write into Flash"    
    MyData = OpenFile(Prompt,"Bootloader files (*.bin)|*.bin")
    if (MyData = Nothing)
        goto    WriteBootExit
    endif
    if not (Len(MyData) = BootSize)
        Status("Error: File is not the size of the bootloader")
        goto    WriteBootExit
    endif
    Memory(CFGFLASH).Write(MyData,0,BootSize)
    Status("New bootloader successfully written")
WriteBootExit:
        Tab(t1).ButtonEnable()
EndEvent

CreateEvent(SaveFirmware)
    Status("Saving the SB5100's Firmware")
        Tab(t1).ButtonDisable()
    FwStart = Legacy.GetFwLocation()
    FwLen = Legacy.GetFwLen()
    FwLen += 92                      #Need to add 92 bytes to cover the fw header
    MyData = Memory(CFGFLASH).ReadVerify(FwStart,FwLen)   #ReadFlashVerify
        if (MyData = Nothing)
        Status("Error: data read was corrupted")
            Tab(t1).ButtonEnable()
        Exit Event
    endif
    Prompt = "Choose filename to save the firmware"
    SaveFile(MyData,Prompt,MYFIRMNAME)
    Status("Successfully read firmware from Flash")
        Tab(t1).ButtonEnable()
EndEvent

CreateEvent(WriteFirmware)
    Status("Programming the SB5100's Firmware")
        Tab(t1).ButtonDisable()
    Prompt = "Choose a firmware to install"    
    MyData = OpenFile(Prompt,"Firmware files (*.bin,*.p7)|*.bin;*.p7")
    if (MyData = Nothing)
        WriteErr = "User cancelled opperation"
        goto    ExitWriteFwErr
    endif
    If (HWORD(MyData,0) = 12418)        #Remove header if .p7 fw
        Writeline("Removing .p7 firmware header")
        HeadLen = HWORD(MyData,2) + 7    #increases Headlen by 7
        NewLen = Len(MyData) - HeadLen
        Resize(MyData,HeadLen,NewLen)    #Removes the p7 header
    endif
    FwLen = Len(MyData)
    FwStart = Legacy.GetFwLocation()
    If (FwStart = 0)
        WriteErr = "Error: Firmware destination not found"
        goto    ExitWriteFwErr
    endif
    If (FwLen > 600000)
        goto    BeginWrite
    endif
    If not Ask("File is smaller than a typical firmware. Write Anyways?")
            WriteErr = "Cancelled firmware update"
        goto    ExitWriteFwErr
    endif
BeginWrite:
    Memory(CFGFLASH).Write(MyData,FwStart,FwLen)
    Status("New firmware successfully installed")
    MYFIRMNAME = Legacy.GetFwName()
    Tab(t1).SetText("FW",MYFIRMNAME)
        Tab(t1).ButtonEnable()
        Exit
  ExitWriteFwErr:
    Status(WriteErr)
        Tab(t1).ButtonEnable()
EndEvent
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
GBABY4201 Offline
Senior Member
****
Posts: 154
Threads: 27
Joined: Nov 2011
Reputation: 5
#6
10-12-2011, 12:34 AM (This post was last modified: 10-12-2011, 12:50 AM by GBABY4201.)
(09-12-2011, 10:35 PM)drewmerc Wrote: what version blackcat software are you using? update to latest
or open sb5100.bcs in notepad and compare it to the one below (sb5100.bcs is in the scripts folder)

Code:
# Script file for BCM3349 (SB5100) - 334817F
# This script is automatically executed when BlackcatUSB
# reads the CPU ID that the SB5100 uses. Which is 0x334817F.

MyDevice = "Motorola SB5100"    #Name of device
BootSize = 32768        #Size of bootloader (in bytes)
ImgFile = "images\Motorola.gif" #Location of the logo

JTAG.MemoryAddress(0x0)
JTAG.MemoryType("RAM")
JTAG.MemorySize(0x800000)
CFGMEM = JTAG.MemoryInit()
JTAG.MemoryAddress(0x1FC00000)
JTAG.MemoryType("CFI")
CFGFLASH = JTAG.MemoryInit()

#removed this to gain performance. If you have reading issues, uncomment
#SetParam(3,0)            #Sets read delay to 0
SetParam(4,1)            #Sets read mode to 1
SetParam(2,220)            #Sets the AMD flash delay to 200

Legacy.SetFlash(CFGFLASH)
MYFIRMNAME = Legacy.GetFwName()

t1 = Tab.Create(MyDevice)
Tab(t1).AddGroup("Bootloader",10,10,420,54)
Tab(t1).AddGroup("Firmware",10,70,420,70)
Tab(t1).AddText("MSG1","This changes the default bootloader",20,36)
Tab(t1).AddButton("ReadBoot","Read",250,30)
Tab(t1).AddButton("WriteBoot","Write",340,30)
Tab(t1).AddText("FWTITLE","Currently installed:",18,100)
Tab(t1).AddText("FW",MYFIRMNAME,18,114)
Tab(t1).AddButton("SaveFirmware","Save",250,106)
Tab(t1).AddButton("WriteFirmware","Change",340,106)
Tab(t1).AddImage("LOGO",ImgFile,45,240)

CreateEvent(ReadBoot)    #This reads the bootloader
    Status("Reading the SB5100 Bootloader")
        Tab(t1).ButtonDisable()
    MyData = Memory(CFGFLASH).Read(0,BootSize,False)
    Prompt = "Choose filename to save bootloader"    
    SaveFile(MyData,Prompt,"SB5100.Bootloader.bin")
    Status("Successfully read bootloader from Flash")
        Tab(t1).ButtonEnable()
EndEvent

CreateEvent(WriteBoot)
        Tab(t1).ButtonDisable()
    Prompt = "Choose a bootloader to write into Flash"    
    MyData = OpenFile(Prompt,"Bootloader files (*.bin)|*.bin")
    if (MyData = Nothing)
        goto    WriteBootExit
    endif
    if not (Len(MyData) = BootSize)
        Status("Error: File is not the size of the bootloader")
        goto    WriteBootExit
    endif
    Memory(CFGFLASH).Write(MyData,0,BootSize)
    Status("New bootloader successfully written")
WriteBootExit:
        Tab(t1).ButtonEnable()
EndEvent

CreateEvent(SaveFirmware)
    Status("Saving the SB5100's Firmware")
        Tab(t1).ButtonDisable()
    FwStart = Legacy.GetFwLocation()
    FwLen = Legacy.GetFwLen()
    FwLen += 92                      #Need to add 92 bytes to cover the fw header
    MyData = Memory(CFGFLASH).ReadVerify(FwStart,FwLen)   #ReadFlashVerify
        if (MyData = Nothing)
        Status("Error: data read was corrupted")
            Tab(t1).ButtonEnable()
        Exit Event
    endif
    Prompt = "Choose filename to save the firmware"
    SaveFile(MyData,Prompt,MYFIRMNAME)
    Status("Successfully read firmware from Flash")
        Tab(t1).ButtonEnable()
EndEvent

CreateEvent(WriteFirmware)
    Status("Programming the SB5100's Firmware")
        Tab(t1).ButtonDisable()
    Prompt = "Choose a firmware to install"    
    MyData = OpenFile(Prompt,"Firmware files (*.bin,*.p7)|*.bin;*.p7")
    if (MyData = Nothing)
        WriteErr = "User cancelled opperation"
        goto    ExitWriteFwErr
    endif
    If (HWORD(MyData,0) = 12418)        #Remove header if .p7 fw
        Writeline("Removing .p7 firmware header")
        HeadLen = HWORD(MyData,2) + 7    #increases Headlen by 7
        NewLen = Len(MyData) - HeadLen
        Resize(MyData,HeadLen,NewLen)    #Removes the p7 header
    endif
    FwLen = Len(MyData)
    FwStart = Legacy.GetFwLocation()
    If (FwStart = 0)
        WriteErr = "Error: Firmware destination not found"
        goto    ExitWriteFwErr
    endif
    If (FwLen > 600000)
        goto    BeginWrite
    endif
    If not Ask("File is smaller than a typical firmware. Write Anyways?")
            WriteErr = "Cancelled firmware update"
        goto    ExitWriteFwErr
    endif
BeginWrite:
    Memory(CFGFLASH).Write(MyData,FwStart,FwLen)
    Status("New firmware successfully installed")
    MYFIRMNAME = Legacy.GetFwName()
    Tab(t1).SetText("FW",MYFIRMNAME)
        Tab(t1).ButtonEnable()
        Exit
  ExitWriteFwErr:
    Status(WriteErr)
        Tab(t1).ButtonEnable()
EndEvent


that didint fix it eather....
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#7
10-12-2011, 12:54 AM
post your bcs
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
GBABY4201 Offline
Senior Member
****
Posts: 154
Threads: 27
Joined: Nov 2011
Reputation: 5
#8
10-12-2011, 12:57 AM (This post was last modified: 10-12-2011, 01:14 AM by GBABY4201.)
i wonder if it has a bad bootloader and the usb cant read the config flash????
(10-12-2011, 12:54 AM)drewmerc Wrote: post your bcs


# Script file for BCM3349 (SB5100) - 334817F
# This script is automatically executed when BlackcatUSB
# reads the CPU ID that the SB5100 uses. Which is 0x334817F.

MyDevice = "Motorola SB5100" #Name of device
BootSize = 32768 #Size of bootloader (in bytes)
ImgFile = "images\Motorola.gif" #Location of the logo

JTAG.MemoryAddress(0x0)
JTAG.MemoryType("RAM")
JTAG.MemorySize(0x800000)
CFGMEM = JTAG.MemoryInit()
JTAG.MemoryAddress(0x1FC00000)
JTAG.MemoryType("CFI")
CFGFLASH = JTAG.MemoryInit()

#removed this to gain performance. If you have reading issues, uncomment
#SetParam(3,0) #Sets read delay to 0
SetParam(4,1) #Sets read mode to 1
SetParam(2,220) #Sets the AMD flash delay to 200

Legacy.SetFlash(CFGFLASH)
MYFIRMNAME = Legacy.GetFwName()

t1 = Tab.Create(MyDevice)
Tab(t1).AddGroup("Bootloader",10,10,420,54)
Tab(t1).AddGroup("Firmware",10,70,420,70)
Tab(t1).AddText("MSG1","This changes the default bootloader",20,36)
Tab(t1).AddButton("ReadBoot","Read",250,30)
Tab(t1).AddButton("WriteBoot","Write",340,30)
Tab(t1).AddText("FWTITLE","Currently installed:",18,100)
Tab(t1).AddText("FW",MYFIRMNAME,18,114)
Tab(t1).AddButton("SaveFirmware","Save",250,106)
Tab(t1).AddButton("WriteFirmware","Change",340,106)
Tab(t1).AddImage("LOGO",ImgFile,45,240)

CreateEvent(ReadBoot) #This reads the bootloader
Status("Reading the SB5100 Bootloader")
Tab(t1).ButtonDisable()
MyData = Memory(CFGFLASH).Read(0,BootSize,False)
Prompt = "Choose filename to save bootloader"
SaveFile(MyData,Prompt,"SB5100.Bootloader.bin")
Status("Successfully read bootloader from Flash")
Tab(t1).ButtonEnable()
EndEvent

CreateEvent(WriteBoot)
Tab(t1).ButtonDisable()
Prompt = "Choose a bootloader to write into Flash"
MyData = OpenFile(Prompt,"Bootloader files (*.bin)|*.bin")
if (MyData = Nothing)
goto WriteBootExit
endif
if not (Len(MyData) = BootSize)
Status("Error: File is not the size of the bootloader")
goto WriteBootExit
endif
Memory(CFGFLASH).Write(MyData,0,BootSize)
Status("New bootloader successfully written")
WriteBootExit:
Tab(t1).ButtonEnable()
EndEvent

CreateEvent(SaveFirmware)
Status("Saving the SB5100's Firmware")
Tab(t1).ButtonDisable()
FwStart = Legacy.GetFwLocation()
FwLen = Legacy.GetFwLen()
FwLen += 92 #Need to add 92 bytes to cover the fw header
MyData = Memory(CFGFLASH).ReadVerify(FwStart,FwLen) #ReadFlashVerify
if (MyData = Nothing)
Status("Error: data read was corrupted")
Tab(t1).ButtonEnable()
Exit Event
endif
Prompt = "Choose filename to save the firmware"
SaveFile(MyData,Prompt,MYFIRMNAME)
Status("Successfully read firmware from Flash")
Tab(t1).ButtonEnable()
EndEvent

CreateEvent(WriteFirmware)
Status("Programming the SB5100's Firmware")
Tab(t1).ButtonDisable()
Prompt = "Choose a firmware to install"
MyData = OpenFile(Prompt,"Firmware files (*.bin,*.p7)|*.bin;*.p7")
if (MyData = Nothing)
WriteErr = "User cancelled opperation"
goto ExitWriteFwErr
endif
If (HWORD(MyData,0) = 12418) #Remove header if .p7 fw
Writeline("Removing .p7 firmware header")
HeadLen = HWORD(MyData,2) + 7 #increases Headlen by 7
NewLen = Len(MyData) - HeadLen
Resize(MyData,HeadLen,NewLen) #Removes the p7 header
endif
FwLen = Len(MyData)
FwStart = Legacy.GetFwLocation()
If (FwStart = 0)
WriteErr = "Error: Firmware destination not found"
goto ExitWriteFwErr
endif
If (FwLen > 600000)
goto BeginWrite
endif
If not Ask("File is smaller than a typical firmware. Write Anyways?")
WriteErr = "Cancelled firmware update"
goto ExitWriteFwErr
endif
BeginWrite:
Memory(CFGFLASH).Write(MyData,FwStart,FwLen)
Status("New firmware successfully installed")
MYFIRMNAME = Legacy.GetFwName()
Tab(t1).SetText("FW",MYFIRMNAME)
Tab(t1).ButtonEnable()
Exit
ExitWriteFwErr:
Status(WriteErr)
Tab(t1).ButtonEnable()
EndEvent
[quote='' pid='6911' dateline='1323466557']
what version blackcat software are you using? update to latest
or open sb5100.bcs in notepad and compare it to the one below (sb5100.bcs is in the scripts folder)

drewmerc: i have the newest one that they have out for the blackcat...280..1.2 .2.0 usb 3 and 5 volts.jumpers and the duel dip switches.
i wonder if i could have a bad config flash on the modem...???
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#9
10-12-2011, 01:45 AM
fucks knows what going on i guess your flash chip could be dead so i'll send you here http://www.blackcatusb.net
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
GBABY4201 Offline
Senior Member
****
Posts: 154
Threads: 27
Joined: Nov 2011
Reputation: 5
#10
10-12-2011, 03:08 AM (This post was last modified: 10-12-2011, 03:58 AM by GBABY4201.)
(10-12-2011, 01:45 AM)drewmerc Wrote: fucks knows what going on i guess your flash chip could be dead so i'll send you here http://www.blackcatusb.net

thank you man your the bumb drewmerc,,
i have to use verson 267...... ok its reading it but now it wont write it...im ordered my printer jtag im gonna just try to flash it with that....
Find
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)