Accidently Write/CFI Flash Using Haxorware

[tonyduong15]

Okay So I wanted to flash Haxorware Firmware into my Sb5101, but instead of flashing it in the Motorola SB5101, I use the Memory --> Write --> then i picked Haxorware. Same with CFI Flash--- Write--- Haxorware . now my memory shows as FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF on everysingle line. Well the problem is my Sb5101 is bricked, and all the lights are not working beside the orange light. I can't access the 192.168.100.1 page. I can still connect it through BlackcatUSB, so thats my only hope to fix but I don't know what to do with it now. Please help me.

[skribblz]

Flash over a 2mb dump of a sb5101

[tonyduong15]

can you explain how to do that because I don't know where to start? Do i need to download that 2mb dump? or where do I get it? Btw Im using BlackCatUsb so please show me step by step. THanks

[skribblz]

detect
ldram 9fc00000
(A File Open dialog will appear, find your 2MB backup file and click open)
program 9fc00000 200000

Go find a 2mb dump. It's somewhere on the internet.

[tonyduong15]

i type that in the console right? because it said undefined function, event or variable: detect it wont run anything, im typing it in the BlackcatUSB here's a screenshot of it

[tonyduong15]

btw i have a working sb5101 can i get that 2mb file out of the working one and use it on the non working one right now? I can't get Jtag to work it doesn't detect my Blackcatusb, im running win7 64bit. I did try to use window xp mode inside 7 and got jtag running yet it doesn't detect any of my blackcatusb i really need like step by step help to get this working.

[drewmerc]

if you have a backup just backup the entire flash then program that

[tonyduong15]

I dont have a backup, for that bricked modem, but can i use another modem and back it up? then use that back up for the bricked modem? anyone show me how? please

[drewmerc]

yes using the read and write buttons on the flash tab

i suggest you make a backup of the bricked modem first as you may be able to extract the nonvol from it and do a proper unbrick of you modem (this depends on what you did to brick it in the first place, if you dont know how to extract the nonvol PM me a link to the backup you make and i'll have a look)

[tonyduong15]

what i did in the first place is that I went to Memory ---> Write --> it ask me to pick a .bin file so i picked the haxorware11rev39-DIAG.bin, same with CFI Flash---> Write --> haxorware11rev39-DIAG.bin. Then I went to Motorola SB5101 Firmware Change ---> haxorware11rev39-DIAG.bin thats what i did. I pm'd u the link of my CFI Flash already. Please take a look.