11-06-2020, 05:33 PM
after buying a premodded 1602 what do i need to do???? i put in cm cert,config cm,key bin,mfg cert,mfg key bin, and root key, change mac with cert and 3rd light blinking never stops
|
is there a bitware 101???
|
11-06-2020, 11:25 PM
Are you trying to force config, try without forcing a config first and see if you can lock channels
12-06-2020, 12:54 AM
Just like Wichin12 said forcing can be an issue ,bad config or no more forcing.... if you have a dual boot version try dev19 or dev9 and vice versa..Good luck
12-06-2020, 08:13 PM
11-02-2022, 03:37 PM
(11-06-2020, 05:33 PM)graco1 Wrote: after buying a premodded 1602 what do i need to do???? i put in cm cert,config cm,key bin,mfg cert,mfg key bin, and root key, change mac with cert and 3rd light blinking never stops I have same problem with you! only light can not stop! no working！ why can help me :please email to me :usapzq@gmail.com thanks a lot
11-02-2022, 03:46 PM
(11-06-2020, 11:25 PM)Wichin12 Wrote: Are you trying to force config, try without forcing a config first and see if you can lock channels can you help me see about arris 1602 modem.... my modem no working,,,here is my modem doscic log :[INFO] [COMMON_COMPONENTS.GIM(pid=124)]: GIM initializing... [INFO] [COMMON_COMPONENTS.GIM(pid=124)]: GIM initialization complete. GIM_MODULE=3086 [INFO] [COMMON_COMPONENTS.L2SWITCH(pid=123)]: Initializing L2switch library... [INFO] [COMMON_COMPONENTS.L2SWITCH(pid=123)]: Initializing L2switch... [INFO] [COMMON_COMPONENTS.L2SWITCH(pid=123)]: L2switch initialized successfully [INFO] [DOCSIS.INIT(pid=134)]: Exec NvramDb_Init [INFO] [DOCSIS.NVRAM_DB(pid=134)]: Restoring NVRAM DB from NVRAM ... SUCCESS [INFO] [DOCSIS.INIT(pid=134)]: Exec Bpi_DbInit [INFO] [DOCSIS.BPI(pid=134)]: readCertsFromNvram: #### CM Private Key already in the clear - legacy CA [INFO] [DOCSIS.INIT(pid=134)]: Exec Bpi_BpiAuthDb_DbInit [INFO] [DOCSIS.INIT(pid=134)]: Exec Bpi_BpiTekDb_DbInit [INFO] [DOCSIS.INIT(pid=134)]: Exec Bpi_SaMapDb_DbInit [INFO] [DOCSIS.INIT(pid=134)]: Exec SWDL_SwDlDb_Init [INFO] [DOCSIS.INIT(pid=134)]: Exec HalDb_Init [INFO] [DOCSIS.INIT(pid=134)]: Exec UpstreamParamsDb_Init [INFO] [DOCSIS.INIT(pid=134)]: Exec qos_IntDb_Init [WARNING] [DOCSIS.QOS(pid=134)]: Failed reset DSX TA SM to IDLE on TA DB Reset [INFO] [DOCSIS.INIT(pid=134)]: Exec CoSDb_Init [INFO] [DOCSIS.INIT(pid=134)]: Exec PrimaryDsFreqOverrideDb_Init [INFO] [DOCSIS.INIT(pid=134)]: Exec L2vpnDb_Init [INFO] [DOCSIS.DOCSISCFG_DB(pid=134)]: IpProvisMode=0 [INFO] [DOCSIS.INIT(pid=134)]: Looking for LSDDB /nvram/1/lsddb.ini [ERROR] [COMMON_COMPONENTS.LSDDB(pid=302)]: LSDDB - actualDb == NULL [INFO] [ARRIS.INIT(pid=312)]: ************** ARRIS Init *************** [INFO] [ARRIS.DB(pid=312)]: Database Manager Initialization complete [INFO] [ARRIS.INIT(pid=312)]: **************** App Mode *************** [INFO] [ARRIS.INIT(pid=312)]: ************ Initializing Ethernet ************* [INFO] [ARRIS.DB(pid=312)]: HomePlug shared memory initialization complete [INFO] [ARRIS.DB(pid=312)]: ARRIS MTA Surveillance Port Initialization complete [INFO] [ARRIS.DB(pid=312)]: ARRIS TR143 SPEEDTEST Database Manager Initialization complete [INFO] [ARRIS.DB(pid=312)]: ARRIS npm Database Manager Initialization complete [INFO] [ARRIS.INIT(pid=312)]: ****** HWRESET ******* [INFO] [ARRIS.INIT(pid=312)]: ********** Initializing Telnet ********** [INIT] [ARRIS.RF_SCAN(pid=312)]: Initializing RF frequency scanner [INFO] [ARRIS.RF(pid=312)]: RF Initialization complete [INFO] [ARRIS.INIT(pid=312)]: ******** Initializing Webserver ********* [ERROR] [ARRIS.INIT(pid=312)]: Error: CM Private Key is not installed [ERROR] [ARRIS.INIT(pid=312)]: Failed to disable ATOM UART [INFO] [ARRIS.INIT(pid=312)]: ********* ARRIS Init Complete ********** [ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[25]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[26]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[27]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[28]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[29]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[30]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[31]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[32]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [COMMON_COMPONENTS.WLAN_RPC(pid=351)]: LSD - Failed to register RPC to host 192.168.254.254 [ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[25]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[26]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[27]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[28]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[29]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[30]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[31]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[32]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS. [INFO] [DOCSIS.HAL_TUNER(pid=296)]: Device #0 initialization (HAL_mxlHrclsDeviceGlobalInitSrv) Start [INFO] [ARRIS.NVM(pid=356)]: NVM Write [INFO] [DOCSIS.HAL_TUNER(pid=296)]: ****** MxL Tuner device #0 initialization SUCCESS ******** [INFO] [DOCSIS.HAL_TUNER(pid=296)]: **** MxL Tuner Configuration done successfully **** [INFO] [DOCSIS.HAL_PHY(pid=351)]: HSIF lane[0] released from reset - ok [Reg 0x1e44 = 0x5481] [INFO] [DOCSIS.HAL_PHY(pid=351)]: HSIF lane 0 Init done ok [disable_tx_loops=0 SerDes_lock_loops=0 power_up_SerDes_loops=0] [INFO] [DOCSIS.HAL_PHY(pid=351)]: HSIF lane[1] released from reset - ok [Reg 0x1e45 = 0x5481] [INFO] [DOCSIS.HAL_PHY(pid=351)]: HSIF lane 1 Init done ok [disable_tx_loops=0 SerDes_lock_loops=0 power_up_SerDes_loops=0] [INFO] [DOCSIS.HAL_PHY(pid=351)]: HSIF Init done ok [counters_loops=0 sync_lock_loops=0 ] [INFO] [DOCSIS.HAL(pid=351)]: Puma HSIF initialization done. DS lanes are locked [INFO] [DOCSIS.HAL_TUNER(pid=296)]: US DAC PSM NOT enabled on this board! [INFO] [DOCSIS.HAL_TUNER(pid=296)]: Setting DAC state to 1 [INFO] [DOCSIS.HAL_PHY(pid=351)]: No errors in HSIF lanes [INFO] [DOCSIS.HAL_PHY(pid=351)]: No errors in HSIF lanes [INFO] [DOCSIS.HAL(pid=351)]: Tuner HSIF initialization done. US is locked [INFO] [DOCSIS.HAL(pid=351)]: Tuner HSIF initialization done. US is locked [INFO] [DOCSIS.HAL(pid=351)]: PGA enable. AMP_OFF - Normal [ERROR] [COMMON_COMPONENTS.WLAN_RPC(pid=427)]: LSD - Failed to register RPC to host 192.168.254.254 [INFO] [COMMON_COMPONENTS.EVENT_MNGR(pid=437)]: Control socket created successfully [INIT] [COMMON_COMPONENTS.EVENT_MNGR(pid=437)]: Init successfully [INFO] [COMMON_COMPONENTS.EVENT_MNGR(pid=437)]: Opening SNMP service [INFO] [COMMON_COMPONENTS.EVENT_MNGR(pid=437)]: Starting main loop [INFO] [DOCSIS.DBRIDGE(pid=442)]: Connect DOCSIS local bridge : Connect, lsdActive 0 [INFO] [DOCSIS.DBRIDGE(pid=442)]: Linked system NPGroups (/nvram/1/npgroups.ini) to default LSDB (/etc/npgroups.ini) [INFO] [DOCSIS.DBRIDGE(pid=442)]: Create LSDs: /nvram/1/lsddb.ini assign VLAN per port [INFO] [COMMON_COMPONENTS.LSD(pid=442)]: LSD - Create LSD devices: /nvram/1/lsddb.ini [WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=442)]: L2SWITCH_SetPortTaggingMode:2275 Port already has desired tagging mode, Port=RGMII0, Tagged=0 [INFO] [DOCSIS.DBRIDGE(pid=442)]: Connect NP for all groups (cannot parse NPGroups file) [WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=442)]: L2SWITCH_SetPortTaggingMode:2275 Port already has desired tagging mode, Port=DOCSIS, Tagged=1 [INFO] [DOCSIS.DMG(pid=442)]: DMG_guard_Enable:: DMG_EnableCtr == -1 [INFO] [DOCSIS.CHM(pid=351)]: Init 32 DOCSIS DS channels [INFO] [DOCSIS.CHM(pid=351)]: Init 8 US channels [INFO] [DOCSIS.FREQ_SCAN(pid=351)]: [INFO] [DOCSIS.FREQ_SCAN(pid=351)]: *** CM SYNCHRONIZING... *** [INFO] [DOCSIS.FREQ_SCAN(pid=351)]: [INFO] [ARRIS.RF_SCAN(pid=351)]: ----> NB Scanning 471000000 Hz [INFO] [DOCSIS.HAL(pid=405)]: 1 Passed Qam Lock. [INFO] [DOCSIS.HAL(pid=405)]: 1 Passed FEC Lock. [INFO] [DOCSIS.HAL(pid=405)]: 1 Passed Mpeg Lock. [INFO] [DOCSIS.HAL(pid=405)]: DS recevier 1 lock successfully on DS frequency 471000000. [INFO] [DOCSIS.DS(pid=405)]: DS[1]: Locked on primary DS 471000000Hz. [WARNING] [DOCSIS.DS(pid=405)]: Got SYNC-SA [00:17:10:9c:3c:86] but the MDD filter is disabled! [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored. [INFO] [DOCSIS.FREQ_SCAN(pid=351)]: MDD Received on primary DS 471000000Hz. [INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID All]: UCD Collect on DS[1]... [INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID All]: 8 UCDs Found; 8 UCDs ordered [UCIDs: 2 1 5 8 3 7 4 6]. [INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 2]: UCD Collect on DS[1]... [INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 2]: UCD Found on DS[1] [change count 2]. [INFO] [DOCSIS.US(pid=351)]: US[1] [UCID 2]: Start B-INIT-Ranging [sid 0] [tech 0]... [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb9 (46), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe2 (56), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=773)]: L2SWITCH_SetPortMode:2150 Port is already in requested mode, Port=RGMII0, mode=RGMII_100 [WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=780)]: L2SWITCH_SetPortMode:2150 Port is already in requested mode, Port=RGMII0, mode=RGMII_1000 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: US[1] [UCID 2]: T3 Retries limit exceeded, no RNG-RSP. [INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 1]: UCD Collect on DS[1]... [INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 1]: UCD Found on DS[1] [change count 2]. [INFO] [DOCSIS.US(pid=351)]: US[1] [UCID 1]: Start B-INIT-Ranging [sid 0] [tech 0]... [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb9 (46), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe2 (56), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: US[1] [UCID 1]: T3 Retries limit exceeded, no RNG-RSP. [INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 5]: UCD Collect on DS[1]... [INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 5]: UCD Found on DS[1] [change count 2]. [INFO] [DOCSIS.US(pid=351)]: US[1] [UCID 5]: Start B-INIT-Ranging [sid 0] [tech 0]... [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb9 (46), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe2 (56), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: US[1] [UCID 5]: T3 Retries limit exceeded, no RNG-RSP. [INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 8]: UCD Collect on DS[1]... [INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 8]: UCD Found on DS[1] [change count 2]. [INFO] [DOCSIS.US(pid=351)]: US[1] [UCID 8]: Start B-INIT-Ranging [sid 0] [tech 0]... [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb9 (46), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe2 (56), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0 [INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
12-02-2022, 06:20 PM
Anybody share am1602 bitware1.5.0.9 bin file? thanks.
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)