Login

doctor · (This post was last modified: 12-05-2017, 09:08 PM by doctor.)

lost connection I have valid certs with matching mac . Anyone can tell me what im missing . If i reboot cm it will continue to work but same message will come back

Jan 1 00:00:09 forceWare user.notice fW: ProductionDb_FrequencyPlanValidity:1840 (pid=223):
Jan 1 00:00:09 forceWare user.notice fW: #####################################
Jan 1 00:00:09 forceWare user.notice fW: #####################################
Jan 1 00:00:09 forceWare user.notice fW: # Frequency plan: North American #
Jan 1 00:00:09 forceWare user.notice fW: #####################################
Jan 1 00:00:09 forceWare user.notice fW: #####################################
Jan 1 00:00:09 forceWare user.notice fW: DOCSIS_ESAFE_GetNetDevEsafeName:1145 (pid=223): Cannot read file: /proc/net/dbrctl/esafe_config
Jan 1 00:00:09 forceWare user.notice fW: NvramDb_Init:968 (pid=223): Restoring NVRAM DB from NVRAM ... SUCCESS
Jan 1 00:00:09 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=223): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 0, TA ID = 0x0.
Jan 1 00:00:09 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=223): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 1, TA ID = 0x0.
Jan 1 00:00:09 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=223): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 2, TA ID = 0x0.
Jan 1 00:00:09 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=223): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 3, TA ID = 0x0.
Jan 1 00:00:09 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=223): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 4, TA ID = 0x0.
Jan 1 00:00:09 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=223): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 5, TA ID = 0x0.
Jan 1 00:00:09 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=223): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 6, TA ID = 0x0.
Jan 1 00:00:09 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=223): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 7, TA ID = 0x0.
Jan 1 00:00:09 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=223): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 8, TA ID = 0x0.
Jan 1 00:00:09 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=223): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 9, TA ID = 0x0.
Jan 1 00:00:09 forceWare user.notice fW: main:615 (pid=223): Using MAC address 18:59:33:98:aa:f4
Jan 1 00:00:09 forceWare user.notice fW: DocsisCfgDb_SetIpProvisMode:450 (pid=223): IpProvisMode=0
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:824 (pid=223): Docsis module [1] -> rcpIndex [1]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:858 (pid=223): Docsis channel ID[1] -> rcpIndex [1]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:858 (pid=223): Docsis channel ID[2] -> rcpIndex [2]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:858 (pid=223): Docsis channel ID[3] -> rcpIndex [3]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:858 (pid=223): Docsis channel ID[4] -> rcpIndex [4]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[5] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[6] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[7] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[8] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[9] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[10] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[11] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[12] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[13] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[14] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[15] -> rcpIndex [0]
Jan 1 00:00:09 forceWare user.notice fW: CHDB_Rx_initDefaultRcps:863 (pid=223): Video channel ID[16] -> rcpIndex [0]
Jan 1 00:00:09 forceWare daemon.info udev[244] creating device node '/dev/DOCINT0'
Jan 1 00:00:09 forceWare daemon.info udev[245] creating device node '/dev/DOCINT1'
Jan 1 00:00:10 forceWare daemon.info udev[246] creating device node '/dev/DOCINT2'
Jan 1 00:00:10 forceWare daemon.info udev[247] creating device node '/dev/DOCINT3'
Jan 1 00:00:10 forceWare daemon.info udev[248] creating device node '/dev/DOCINT4'
Jan 1 00:00:10 forceWare daemon.info udev[249] creating device node '/dev/DOCINT5'
Jan 1 00:00:10 forceWare daemon.info udev[254] creating device node '/dev/DOCINT7'
Jan 1 00:00:10 forceWare daemon.info udev[250] creating device node '/dev/DOCINT6'
Jan 1 00:00:10 forceWare user.notice fW: main:607 (pid=252): HAL_CmdMbox_Init
Jan 1 00:00:10 forceWare user.notice fW: HAL_CmdMbox_Init:243 (pid=252): finished successfully
Jan 1 00:00:10 forceWare user.notice fW: main:617 (pid=252): HAL_CmdMbox_ProcessMain
Jan 1 00:00:10 forceWare user.notice fW: HAL_CmdMbox_ProcessMain:272 (pid=252): HAL_CmdMbox_ProcessMain started
Jan 1 00:00:10 forceWare user.notice fW: WaitMboxReadyAndInitAddresses:474 (pid=252): Wait for mboxReady
Jan 1 00:00:10 forceWare user.notice fW: main:315 (pid=251): HAL_EventMbox_Init
Jan 1 00:00:10 forceWare user.notice fW: HAL_EventMbox_Init:137 (pid=251): finished successfully
Jan 1 00:00:10 forceWare user.notice fW: main:319 (pid=251): HAL_EventMbox_ProcessMain
Jan 1 00:00:11 forceWare user.notice fW: main:1200 (pid=274): HAL_TunerMgrInit
Jan 1 00:00:11 forceWare user.notice fW: HAL_TunerMgrInit:363 (pid=274): Finished successfully
Jan 1 00:00:11 forceWare user.notice fW: main:1207 (pid=274): HAL_TunerMgrProcessMain
Jan 1 00:00:11 forceWare user.notice fW: Dbridge_KernelInit:262 (pid=261): The bridge have been configurated successfully
Jan 1 00:00:12 forceWare user.notice fW: MddHandler_InitMddHandler:173 (pid=298): MDD Init completed successfully
Jan 1 00:00:13 forceWare user.notice fW: HAL_HwRevisionInit:1080 (pid=297): Save revision 2.0 in HAL DB.
Jan 1 00:00:14 forceWare user.notice fW: HAL_HwRevisionInit:1080 (pid=300): Save revision 2.0 in HAL DB.
Jan 1 00:00:14 forceWare user.notice fW: DSM_Init:106 (pid=300): Number of DS Ports = 4.
Jan 1 00:00:14 forceWare user.notice fW: DSM_Init:108 (pid=300): Start Global DS Interface Init.
Jan 1 00:00:14 forceWare user.notice fW: HAL_DsInterfaceInit:191 (pid=300): HAL DS Detected Secondary Puma Support = False
Jan 1 00:00:14 forceWare user.notice fW: HAL_TunerMgrDriverRegistration:162 (pid=274): Registered tuner #0, type MT2170
Jan 1 00:00:14 forceWare user.notice fW: HAL_MacDsInit:134 (pid=300): HAL_MacDsMacInit done.
Jan 1 00:00:14 forceWare user.notice fW: HAL_MacDsInit:137 (pid=300): HAL_MacDsCopInit done.
Jan 1 00:00:14 forceWare user.notice fW: HAL_MacDsMddCtrlInit:2156 (pid=300): HW Revision is 1
Jan 1 00:00:14 forceWare user.notice fW: HAL_MacDsMddCtrlInit:2164 (pid=300): Set HW REV 2.0 in MAC_DS_PDSP_MDD_CTL_REG(0x4a000) = 0x00000130
Jan 1 00:00:14 forceWare user.notice fW: HAL_MacDsInit:142 (pid=300): MAC DS Init completed successfully.
Jan 1 00:00:14 forceWare user.notice fW: HAL_DsInterfaceInit:241 (pid=300): HAL_MacMapperOutOfReset start.
Jan 1 00:00:14 forceWare user.notice fW: HAL_DsInterfaceInit:248 (pid=300): HAL_SyncInit Done.
Jan 1 00:00:14 forceWare user.notice fW: HAL_MacDsUnicastDataFilterSerach:215 (pid=300): Revision is 2.0.
Jan 1 00:00:14 forceWare user.notice fW: HAL_MacDsUnicastDataFilterSerach:237 (pid=300): Found entry index 0 in HW Unicast filter table.
Jan 1 00:00:14 forceWare user.notice fW: DSM_Init:117 (pid=300): Global DS Interface Init Done.
Jan 1 00:00:14 forceWare user.notice fW: SNMPA_CreateSocketEntry : type 0, addr = 0, port = 0, ifname = /var/tmp/cm_snmp_ctrl List = (nil)
Jan 1 00:00:14 forceWare user.notice fW: Cntl Entry created
Jan 1 00:00:15 forceWare user.notice fW: main:259 (pid=309): Run DS Manager 4.
Jan 1 00:00:15 forceWare user.notice fW: main:260 (pid=309): DsChannelPortID --------> 4.
Jan 1 00:00:15 forceWare user.notice fW: main:261 (pid=309): DSM ContextOwner -------> 8.
Jan 1 00:00:15 forceWare user.notice fW: main:272 (pid=309): Start HAL_GlobalRegistration.
Jan 1 00:00:15 forceWare user.notice fW: main:259 (pid=310): Run DS Manager 3.
Jan 1 00:00:15 forceWare user.notice fW: main:260 (pid=310): DsChannelPortID --------> 3.
Jan 1 00:00:15 forceWare user.notice fW: main:261 (pid=310): DSM ContextOwner -------> 7.
Jan 1 00:00:15 forceWare user.notice fW: main:272 (pid=310): Start HAL_GlobalRegistration.
Jan 1 00:00:15 forceWare user.notice fW: main:259 (pid=311): Run DS Manager 2.
Jan 1 00:00:15 forceWare user.notice fW: main:260 (pid=311): DsChannelPortID --------> 2.
Jan 1 00:00:15 forceWare user.notice fW: main:261 (pid=311): DSM ContextOwner -------> 6.
Jan 1 00:00:15 forceWare user.notice fW: main:272 (pid=311): Start HAL_GlobalRegistration.
Jan 1 00:00:15 forceWare user.notice fW: DSM_act_InitChannel:144 (pid=309): Init DS channel HW for port ID 4.
Jan 1 00:00:15 forceWare user.notice fW: HAL_DsChannelInit:415 (pid=309): calling HAL_MacDsChannelEnable
Jan 1 00:00:15 forceWare user.notice fW: HAL_MacDsChannelEnable:271 (pid=309): MAC DS channel 3 Enable completed successfully.
Jan 1 00:00:15 forceWare user.notice fW: DSM_act_InitChannel:144 (pid=311): Init DS channel HW for port ID 2.
Jan 1 00:00:15 forceWare user.notice fW: HAL_DsChannelInit:415 (pid=311): calling HAL_MacDsChannelEnable
Jan 1 00:00:15 forceWare user.notice fW: HAL_MacDsChannelEnable:271 (pid=311): MAC DS channel 1 Enable completed successfully.
Jan 1 00:00:15 forceWare user.notice fW: main:259 (pid=312): Run DS Manager 1.
Jan 1 00:00:15 forceWare user.notice fW: main:260 (pid=312): DsChannelPortID --------> 1.
Jan 1 00:00:15 forceWare user.notice fW: main:261 (pid=312): DSM ContextOwner -------> 5.
Jan 1 00:00:15 forceWare user.notice fW: main:272 (pid=312): Start HAL_GlobalRegistration.
Jan 1 00:00:15 forceWare user.notice fW: DSM_act_InitChannel:144 (pid=312): Init DS channel HW for port ID 1.
Jan 1 00:00:15 forceWare user.notice fW: HAL_DsChannelInit:415 (pid=312): calling HAL_MacDsChannelEnable
Jan 1 00:00:15 forceWare user.notice fW: HAL_MacDsChannelEnable:271 (pid=312): MAC DS channel 0 Enable completed successfully.
Jan 1 00:00:15 forceWare user.notice fW: USM_Init:532 (pid=300): usPortsNumber = 4
Jan 1 00:00:15 forceWare user.notice fW: UsFwDownload:203 (pid=300): Entered UsFwDownload
Jan 1 00:00:15 forceWare user.notice fW: UsFwDownload:207 (pid=300): After HAL_Arm9InResetState
Jan 1 00:00:15 forceWare user.notice fW: UsFwDownload:212 (pid=300): change Arm state to reset
Jan 1 00:00:15 forceWare user.notice fW: UsFwDownload:215 (pid=300): After (isInReset == False)
Jan 1 00:00:15 forceWare user.notice fW: UsFwDownload:218 (pid=300): Load instruction file /usr/sbin/FwUpstreamDocsis2_I.bin to 0x100000
Jan 1 00:00:15 forceWare user.notice fW: UsFwDownload:227 (pid=300): Load data file /usr/sbin/FwUpstreamDocsis2_D.bin to 0x110000
Jan 1 00:00:15 forceWare user.notice fW: UsFwDownload:235 (pid=300): Configure ARM to Host interrupts
Jan 1 00:00:15 forceWare user.notice fW: UsFwDownload:248 (pid=300): change Arm state to out of reset
Jan 1 00:00:15 forceWare user.notice fW: HAL_CmdMbox_SendMboxReady:369 (pid=265): initialize mboxReadyIccContext
Jan 1 00:00:15 forceWare user.notice fW: HAL_CmdMbox_SendMboxReady:384 (pid=265): HAL_CmdMbox_SendMboxReady - initialize eventMboxIccContext
Jan 1 00:00:15 forceWare user.notice fW: HAL_CmdMbox_SendMboxReady:398 (pid=265): ICC_send_message
Jan 1 00:00:15 forceWare user.notice fW: HAL_CmdMbox_SendMboxReady:422 (pid=265): ICC_send_message
Jan 1 00:00:15 forceWare user.notice fW: WaitMboxReadyAndInitAddresses:485 (pid=252): MboxReady received
Jan 1 00:00:15 forceWare user.notice fW: InitializeMboxAddress:447 (pid=252): MboxControl Address (FW) - 0x408c00
Jan 1 00:00:15 forceWare user.notice fW: InitializeMboxAddress:450 (pid=252): MboxControl Address (HOST) - 0x118c00
Jan 1 00:00:15 forceWare user.notice fW: InitializeMboxAddress:454 (pid=252): CmdMbox Address(FW) - 0x408c0c
Jan 1 00:00:15 forceWare user.notice fW: InitializeMboxAddress:457 (pid=252): CmdMbox Address(HOST) - 0x118c0c
Jan 1 00:00:15 forceWare user.notice fW: UPCM_Init:307 (pid=300): PGA enable. AMP_OFF - Normal
Jan 1 00:00:15 forceWare user.notice fW: HAL_EventMbox_ProcessMain:181 (pid=251): HAL_EventMbox_ProcessMain - Initialized Mbox Address
Jan 1 00:00:15 forceWare user.notice fW: DSM_act_InitChannel:144 (pid=310): Init DS channel HW for port ID 3.
Jan 1 00:00:15 forceWare user.notice fW: HAL_DsChannelInit:415 (pid=310): calling HAL_MacDsChannelEnable
Jan 1 00:00:15 forceWare user.notice fW: HAL_MacDsChannelEnable:271 (pid=310): MAC DS channel 2 Enable completed successfully.
Jan 1 00:00:17 forceWare user.notice fW: SNMPA_CreateSocketEntry : type 1, addr = c0a86401, port = 161, ifname = lan0 List = 0x5e610
Jan 1 00:00:17 forceWare user.notice fW: SNMPA_CreateSocketEntry : type 1, addr = c0a86401, port = 162, ifname = lan0 List = 0x5e610
Jan 1 00:00:17 forceWare user.notice fW: CreateCtrlSocket:808 (pid=330): Control socket created successfully
Jan 1 00:00:17 forceWare user.notice fW: EVENTMGR_Init:345 (pid=330): Init successfully
Jan 1 00:00:17 forceWare user.notice fW: EVENTMGR_StartSnmpServ:385 (pid=330): Opening SNMP service
Jan 1 00:00:17 forceWare user.notice fW: StartMainLoop:872 (pid=330): Starting main loop
Jan 1 00:00:18 forceWare user.notice fW: Gim_NotificationSend:289 (pid=335): nid=4107: type SRN with 0 bytes data
Jan 1 00:00:18 forceWare user.notice fW: DOCSIS_ESAFE_GetNetDevEsafeName:1168 (pid=335): Cannot find device "^D" in file: /proc/net/dbrctl/esafe_config
Jan 1 00:00:18 forceWare user.notice fW: CHM_act_ChannelManagerEntry:149 (pid=300): Init 4 DOCSIS DS channels
Jan 1 00:00:18 forceWare user.notice fW: CHM_act_ChannelManagerEntry:180 (pid=300): Init 4 US channels
Jan 1 00:00:18 forceWare user.notice fW: DSM_act_DsIdle:162 (pid=309): DSM [4] set to idle
Jan 1 00:00:18 forceWare user.notice fW: DSM_act_DsIdle:162 (pid=310): DSM [3] set to idle
Jan 1 00:00:18 forceWare user.notice fW: DSM_act_DsIdle:162 (pid=311): DSM [2] set to idle
Jan 1 00:00:18 forceWare user.notice fW: DSM_act_DsIdle:162 (pid=312): DSM [1] set to idle
Jan 1 00:00:18 forceWare user.notice fW: ChannelAcquireDS_act_Entry:344 (pid=300):
Jan 1 00:00:18 forceWare user.notice fW: ChannelAcquireDS_act_Entry:345 (pid=300): *** CM SYNCHRONIZING... ***
Jan 1 00:00:18 forceWare user.notice fW: ChannelAcquireDS_act_Entry:346 (pid=300):
Jan 1 00:00:18 forceWare user.notice fW: DsCacheFreqDb_InitDsCacheFreqDb:139 (pid=300): Cache = 0 0 0 0 591000.
Jan 1 00:00:18 forceWare user.notice fW: DsCacheFreqDb_InitDsCacheFreqDb:142 (pid=300): Head = 4, Tail = 0, Cached Frequencies num = 1
Jan 1 00:00:18 forceWare user.notice fW: GetNextFreq_InitScan:161 (pid=300): GetNextFreq_InitScan Init Ds channel list
Jan 1 00:00:18 forceWare user.notice fW: WaitLockPrimary_act_Entry:454 (pid=300): Scanning frequency 591000000Hz. On DS port 1
Jan 1 00:00:18 forceWare user.notice fW: HAL_TunerMgrSetFrequency:224 (pid=300): HAL_TunerMgrSetFrequency - Tuner_DeviceId=1 freq=620000000 CBW=0
Jan 1 00:00:18 forceWare user.notice fW: DSM_act_StartLocking:382 (pid=312): DS[1] Try to lock on primary DS 591000000Hz...
Jan 1 00:00:18 forceWare user.notice fW: HAL_DsChannelSetPrimary:526 (pid=312): Completed PHY_SetDsPrimaryChannel.
Jan 1 00:00:18 forceWare user.notice fW: CHDB_Rx_GetChannelID:1039 (pid=312): Could not find DCID for freq 0 (port 1)
Jan 1 00:00:18 forceWare user.notice fW: DSM_act_StartLocking:412 (pid=312): Failed to Find DCID for DS Port 1.
Jan 1 00:00:18 forceWare user.notice fW: HAL_DsRecieveChannelLock:665 (pid=312): Autodetect - modulation = 2.
Jan 1 00:00:18 forceWare user.notice fW: HAL_LockReceiver:2451 (pid=312): 1 Passed Qam Lock.
Jan 1 00:00:18 forceWare user.notice fW: HAL_LockReceiver:2480 (pid=312): 1 Passed FEC Lock.
Jan 1 00:00:18 forceWare user.notice fW: HAL_LockReceiver:2496 (pid=312): 1 Passed Mpeg Lock.
Jan 1 00:00:18 forceWare user.notice fW: HAL_LockReceiver:2556 (pid=312): DS recevier 1 lock successfully on DS frequency 591000000.
Jan 1 00:00:18 forceWare user.notice fW: DSM_act_StartLocking:639 (pid=312): DS[1] Locked on primary DS 591000000Hz.
Jan 1 00:00:18 forceWare user.notice fW: DSM_act_CheckSyncConnectivity:1037 (pid=312): Stored SYNC-SA as MAC domain address [00:17:10:91:6f:23] in Docsis-DB.
Jan 1 00:00:18 forceWare user.notice fW: DSM_act_CheckSyncConnectivity:1039 (pid=312): Note: MDDs will be filtered by this SA.
Jan 1 00:00:18 forceWare user.notice fW: DSM_act_LockedSuccessEntry:789 (pid=312): DS PHY lock success.
Jan 1 00:00:18 forceWare user.notice fW: MddHandler_HandleMddControlMessage:311 (pid=298): MddHandler_HandleMddControlMessage: Handle MDD Control Message for state 1 completed.
Jan 1 00:00:18 forceWare user.notice fW: MddHandler_SendMddControlMessage:353 (pid=300): MddHandler_SendMddControlMessage: Send MDD Control Message completed successfully.
Jan 1 00:00:20 forceWare user.notice fW: printWarn:211 (pid=298): Invalid event type code - ignored.
Jan 1 00:00:20 forceWare user.notice fW: MDDParser_ParseMDDTlvsDuringInitialization:442 (pid=298): Parse MDD TLVs Completed successfully.
Jan 1 00:00:20 forceWare user.notice fW: HandleCollectMddMsgCompleted:900 (pid=298): Handle Collect Mdd Msg Completed successfully
Jan 1 00:00:20 forceWare user.notice fW: WaitMDD_act_MddOK:677 (pid=300): MDD Received on primary DS 591000000Hz.
Jan 1 00:00:20 forceWare user.notice fW: WaitMDD_act_MddOK:700 (pid=300): Pre-Registration DSID is 0x0.
Jan 1 00:00:20 forceWare user.notice fW: DSM_act_SetChannelMonitors:268 (pid=312): Enable/Disable Channel Monitors.
Jan 1 00:00:20 forceWare user.notice fW: Gim_NotificationSend:289 (pid=335): nid=4097: type ARN with 0 bytes data
Jan 1 00:00:20 forceWare user.notice fW: MddHandler_HandleMddControlMessage:311 (pid=298): MddHandler_HandleMddControlMessage: Handle MDD Control Message for state 3 completed.
Jan 1 00:00:20 forceWare user.notice fW: MddHandler_SendMddControlMessage:353 (pid=300): MddHandler_SendMddControlMessage: Send MDD Control Message completed successfully.
Jan 1 00:00:23 forceWare user.notice fW: USSR_CollectAnyUCD:983 (pid=300): Collecting any UCDs on port [1]...
Jan 1 00:00:23 forceWare user.notice fW: startCollectUcdModeAny:1433 (pid=298): US[1] [UCID Any]: UCD Collect on DS[1]
Jan 1 00:00:23 forceWare user.notice fW: ucd_createRspMsg:1327 (pid=298): US[1] [UCID Any]: 1 UCDs Found; 1 UCDs ordered [UCIDs: 1 0 0 0 0 0 0 0].
Jan 1 00:00:23 forceWare user.notice fW: USSR_act_StartCollectSingleUCD:722 (pid=300): Collecting UCD on port [1]...
Jan 1 00:00:23 forceWare user.notice fW: startCollectUcdModeB:1542 (pid=298): US[1] [UCID 4]: UCD Collect on DS[1]
Jan 1 00:00:24 forceWare user.notice fW: stopCollectUcdModeB:1607 (pid=298): US[1] [UCID 4]: UCD Found on DS[1] [change count 6].
Jan 1 00:00:24 forceWare user.notice fW: USM_StartRng:289 (pid=300): US[1] [UCID 4]: Start B-INIT-Ranging [sid 0] [tech 0]...
Jan 1 00:00:25 forceWare user.notice fW: usm_handleRngRspStatus:1410 (pid=313): US[1] [UCID 4]: RNG-RSP CONTINUE.
Jan 1 00:00:26 forceWare user.notice fW: usm_handleRngRspStatus:1398 (pid=313): US[1] [UCID 4]: RNG-RSP SUCCESS.
Jan 1 00:00:26 forceWare user.notice fW: DSM_act_SetChannelMonitors:268 (pid=312): Enable/Disable Channel Monitors.
Jan 1 00:00:26 forceWare user.notice fW: DPR_act_ProvEntry:241 (pid=387):
Jan 1 00:00:26 forceWare user.notice fW: DPR_act_ProvEntry:242 (pid=387): *** CM PROVISIONING... ***
Jan 1 00:00:26 forceWare user.notice fW: DPR_act_ProvEntry:243 (pid=387):
Jan 1 00:00:26 forceWare user.notice fW: DPR_cond_IsEAE:286 (pid=387): EAE Disabled.
Jan 1 00:00:26 forceWare user.notice fW: IPP_act_Entry:349 (pid=387): -------------------------------------------------------
Jan 1 00:00:26 forceWare user.notice fW: IPP_act_Entry:351 (pid=387): IP provisioning start in the IP_PROV_V4_ONLY mode
Jan 1 00:00:26 forceWare user.notice fW: IPP_act_Entry:352 (pid=387): -------------------------------------------------------
Jan 1 00:00:29 forceWare user.notice fW: dhcp4_writeToDb:1972 (pid=388): [DHCP4_PLG]: The DHCPv4 client did not receive the SYSLOG server address.
Jan 1 00:00:29 forceWare user.notice fW: dhcp4_addAddr:1725 (pid=388): [DHCP4_PLG]: Set to the wan0 addr: 7.0.60.11 mask: 255.255.240.0 router: 7.0.48.1
Jan 1 00:00:29 forceWare user.notice fW: SNMPA_CreateSocketEntry : type 1, addr = 7003c0b, port = 161, ifname = wan0 List = 0x5e610
Jan 1 00:00:29 forceWare user.notice fW: SNMPA_CreateSocketEntry : type 1, addr = 7003c0b, port = 162, ifname = wan0 List = 0x5e610
Jan 1 00:00:29 forceWare user.notice fW: printInetAddr:1006 (pid=387): ******** Log server Addr ********
Jan 1 00:00:29 forceWare user.notice fW: printIpAddrType:930 (pid=387): IP addr type = AF_UNSPEC
Jan 1 00:00:29 forceWare user.notice fW: printIpAddrFamily:960 (pid=387): IP addr family = AF_UNSPEC
Jan 1 00:00:29 forceWare user.notice fW: printIpAddrField:989 (pid=387): IP addr wrong family
Jan 1 00:00:29 forceWare user.notice fW: printInetAddr:1014 (pid=387): **************************
Jan 1 00:00:29 forceWare user.notice fW: ToD_StartTodManager:140 (pid=387):
Jan 1 00:00:29 forceWare user.notice fW: ******** Start ObtainToD process ********
Jan 1 00:00:29 forceWare user.notice fW: TI ToD client (v1.0) started
May 10 04:03:15 forceWare user.notice fW: Gim_NotificationSend:289 (pid=401): nid=4104: type NRN with 4 bytes data
May 10 04:03:15 forceWare user.notice fW: report_config:203 (pid=401): =========================================
May 10 04:03:15 forceWare user.notice fW: report_config:204 (pid=401): [TOD_PLG]: Was revceived time Wed May 10 04:03:15 2017
May 10 04:03:15 forceWare user.notice fW: from ToD server 64.71.246.180, timezone =0
May 10 04:03:15 forceWare user.notice fW: report_config:205 (pid=401): =========================================
May 10 04:03:15 forceWare user.notice fW: ObtConf_act_EntryTftpWait:276 (pid=387):
May 10 04:03:15 forceWare user.notice fW: ******** Start ObtainConfig process ********
May 10 04:03:15 forceWare user.notice fW: TftpDocsis:807 (pid=387): Try 1 to download configuration file [bac10700010618593398aaf4] from TFTP server [64.71.246.180]...
May 10 04:03:15 forceWare user.notice fW: TodDocsis:283 (pid=387): [TOD] :ToD process sent 'ToD_ev_Time' event.
May 10 04:03:15 forceWare user.notice fW: TodDocsis:289 (pid=387): [TOD] :TodRfc client return success.Time flag = 1
May 10 04:03:15 forceWare user.notice fW: TftpDocsis:848 (pid=387): Configuration file [bac10700010618593398aaf4] downloaded from TFTP server [64.71.246.180].
May 10 04:03:15 forceWare user.notice fW: cfgfParserInit:1341 (pid=387): cfgfParserInit
May 10 04:03:15 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=387): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 0, TA ID = 0x0.
May 10 04:03:15 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=387): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 1, TA ID = 0x0.
May 10 04:03:15 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=387): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 2, TA ID = 0x0.
May 10 04:03:15 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=387): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 3, TA ID = 0x0.
May 10 04:03:15 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=387): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 4, TA ID = 0x0.
May 10 04:03:15 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=387): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 5, TA ID = 0x0.
May 10 04:03:15 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=387): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 6, TA ID = 0x0.
May 10 04:03:15 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=387): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 7, TA ID = 0x0.
May 10 04:03:15 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=387): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 8, TA ID = 0x0.
May 10 04:03:15 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=387): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 9, TA ID = 0x0.
May 10 04:03:15 forceWare user.notice fW: performFirstPass:1580 (pid=387): [performFirstPass(in)]
May 10 04:03:15 forceWare user.notice fW: verifyConfigFile:2893 (pid=387): [verifyConfigFile(in)]
May 10 04:03:15 forceWare user.notice fW: resetDBs:3160 (pid=387): [resetDBs(in)]
May 10 04:03:16 forceWare user.notice fW: Snmp_SetConfigFile completed with status 0
May 10 04:03:16 forceWare user.notice fW: ReportTlv11Events:5105 (pid=387): Config file contains unsupported OID's in TLV11 - Ignore!
May 10 04:03:16 forceWare user.notice fW: Gim_NotificationSend:289 (pid=387): nid=4108: type SRN with 22 bytes data
May 10 04:03:16 forceWare user.notice fW: DOCSIS_ESAFE_GetNetDevEsafeName:1168 (pid=387): Cannot find device "^D" in file: /proc/net/dbrctl/esafe_config
May 10 04:03:16 forceWare user.notice fW: VerifyCvcAndSignature:615 (pid=387): CVC Subject orgName = 80000008
May 10 04:03:16 forceWare user.notice fW: VerifyCvcAndSignature:617 (pid=387): CVC Issuer orgName = Data Over Cable Service Interface Specifications
May 10 04:03:16 forceWare user.notice fW: VerifyCvcAndSignature:631 (pid=387): CVC Root Sign
May 10 04:03:16 forceWare user.notice fW: VerifyCvcAndSignature:668 (pid=387): CVC Signature was verified!
May 10 04:03:16 forceWare user.notice fW: CheckExtendedKeyUsage:941 (pid=387): Extended key usage was verified
May 10 04:03:16 forceWare user.notice fW: CheckCvcValidity:1017 (pid=387): CVC org name match
May 10 04:03:16 forceWare user.notice fW: CheckCvcValidity:1069 (pid=387): CVC start time OK
May 10 04:03:16 forceWare user.notice fW: RegReqAddRcp:1331 (pid=387): Select RCP type according to : [Board-Config=1] [Frequency-Spacing=0]
May 10 04:03:16 forceWare user.notice fW: RCPDB_SetRcpType:1908 (pid=387): Use RCP group : AvailableUSRcps
May 10 04:03:16 forceWare user.notice fW: setBpiMode:2996 (pid=387): Config file: privacy is Enabled, privacy mode is BPI+
May 10 04:03:16 forceWare user.notice fW: CfgFileParser_Activate:1263 (pid=387): Configuration file processing complete (status = 0).
May 10 04:03:16 forceWare user.notice fW: CfgFileParser_Activate:1275 (pid=387): Configuration file: Saved to NVRAM vendorClassId = 0
May 10 04:03:16 forceWare user.notice fW: IPP_act_Exit:440 (pid=387):
May 10 04:03:16 forceWare user.notice fW: IPP_act_Exit:441 (pid=387): **********************************************************
May 10 04:03:16 forceWare user.notice fW: IPP_act_Exit:442 (pid=387): **********************************************************
May 10 04:03:16 forceWare user.notice fW: IPP_act_Exit:443 (pid=387): ** **
May 10 04:03:16 forceWare user.notice fW: IPP_act_Exit:444 (pid=387): ** IP PROVISIONING FINISHED SUCCESSFULLY **
May 10 04:03:16 forceWare user.notice fW: IPP_act_Exit:445 (pid=387): ** ------------------------------------- **
May 10 04:03:16 forceWare user.notice fW: IPP_act_Exit:446 (pid=387): ** **
May 10 04:03:16 forceWare user.notice fW: IPP_act_Exit:447 (pid=387): **********************************************************
May 10 04:03:16 forceWare user.notice fW: IPP_act_Exit:448 (pid=387): **********************************************************
May 10 04:03:16 forceWare user.notice fW: IPP_act_Exit:449 (pid=387):
May 10 04:03:16 forceWare user.notice fW: DCR_act_ResetRetry:168 (pid=387):
May 10 04:03:16 forceWare user.notice fW: DCR_act_ResetRetry:169 (pid=387): *** CM REGISTRATION... ***
May 10 04:03:16 forceWare user.notice fW: DCR_act_ResetRetry:170 (pid=387):
May 10 04:03:16 forceWare user.notice fW: RegMhReqSend:645 (pid=387): REG-REQ-MP [1 fragments] sent.
May 10 04:03:16 forceWare user.notice fW: RegRspHandle:1295 (pid=298): REG-RSP-MP [2 fragments] received [CMTS Response 0].
May 10 04:03:16 forceWare user.notice fW: Hal_RngGetAbsoluteTimeOffset:1576 (pid=298): US[1] Symbol Clock Locking Indicator = 1
May 10 04:03:16 forceWare user.notice fW: Hal_RngGetAbsoluteTimeOffset:1625 (pid=298): US[1] timeOffsetIntUnsignedValue=0x2b3000, dsInitialTimingOffset=0x1b34, Absolute integer=0xffc, Absolute fractional=0x0
May 10 04:03:16 forceWare user.notice fW: keepRngParamsForReference:822 (pid=298): Got referParams for port=1, usId=4:
May 10 04:03:16 forceWare user.notice fW: keepRngParamsForReference:826 (pid=298): ucdFreq=30596000, currFreq=30595999 timeInt=4092 timeFract=0 power 0x8f*0.25dB
May 10 04:03:16 forceWare user.notice fW: keepRngParamsForReference:822 (pid=298): Got referParams for port=2, usId=0:
May 10 04:03:16 forceWare user.notice fW: keepRngParamsForReference:826 (pid=298): ucdFreq=30596000, currFreq=30595999 timeInt=4092 timeFract=0 power 0x8f*0.25dB
May 10 04:03:16 forceWare user.notice fW: keepRngParamsForReference:822 (pid=298): Got referParams for port=3, usId=0:
May 10 04:03:16 forceWare user.notice fW: keepRngParamsForReference:826 (pid=298): ucdFreq=30596000, currFreq=30595999 timeInt=4092 timeFract=0 power 0x8f*0.25dB
May 10 04:03:16 forceWare user.notice fW: keepRngParamsForReference:822 (pid=298): Got referParams for port=4, usId=0:
May 10 04:03:16 forceWare user.notice fW: keepRngParamsForReference:826 (pid=298): ucdFreq=30596000, currFreq=30595999 timeInt=4092 timeFract=0 power 0x8f*0.25dB
May 10 04:03:16 forceWare user.notice fW: qos_regUtils_SfTlvCheck:1594 (pid=298): SF TLV parsing (first pass) - type=24 Length=50
May 10 04:03:16 forceWare user.notice fW: qos_regUtils_SfTlvCheck:1721 (pid=298): SF TLV parsing (first pass) completed - SFID=0x3ae5c0c1, internal DB index=0
May 10 04:03:16 forceWare user.notice fW: qos_regUtils_SfTlvCheck:1594 (pid=298): SF TLV parsing (first pass) - type=25 Length=46
May 10 04:03:16 forceWare user.notice fW: qos_regUtils_SfTlvCheck:1721 (pid=298): SF TLV parsing (first pass) completed - SFID=0x3ae5e0c2, internal DB index=1
May 10 04:03:16 forceWare user.notice fW: regRspGotBpiPlusCap:2053 (pid=298): Staying with current BPI+ mode
May 10 04:03:16 forceWare user.notice fW: regRspGotMdf:2207 (pid=298): Got MDF Support Mode 2 in REG-RSP
May 10 04:03:16 forceWare user.notice fW: regRspGotMapUcdSrc:2235 (pid=298): Got UCD Source Support Mode 1 in REG-RSP
May 10 04:03:16 forceWare user.notice fW: regRspGotExtUsPowerCap:2260 (pid=298): Got Extended US Power Mode Disabled in REG-RSP
May 10 04:03:16 forceWare user.notice fW: qos_regUtils_SfSidClustTlvCheck:2041 (pid=298): SID Cluster parsing (first pass) - TLV type 0x2f, length=88
May 10 04:03:16 forceWare user.notice fW: qos_regUtils_SfSidClustTlvCheck:2110 (pid=298): SID Cluster TLV was parsed and added to QOS internal DB
May 10 04:03:16 forceWare user.notice fW: qos_regUtils_ParseAndUpdateQosParams:705 (pid=298): QOS TLVs Parsing entry (second pass)
May 10 04:03:16 forceWare user.notice fW: qos_regUtils_CheckCorrectness:542 (pid=298): Removing UDCs received from config file (if any) from classifiers DB
May 10 04:03:16 forceWare user.notice fW: sfTopParseAddCB:2129 (pid=298): SF TLV parsing (second pass) - TLV type 0x18, length=0x32
May 10 04:03:16 forceWare user.notice fW: qos_mainDb_AddServiceFlow:463 (pid=298): SF was added to QOS main DB, SfId=0x3ae5c0c1, direction=2, DB index=0 Primary = 1
May 10 04:03:16 forceWare user.notice fW: sfTopParseAddCB:2129 (pid=298): SF TLV parsing (second pass) - TLV type 0x19, length=0x2e
May 10 04:03:16 forceWare user.notice fW: qos_mainDb_AddServiceFlow:463 (pid=298): SF was added to QOS main DB, SfId=0x3ae5e0c2, direction=1, DB index=1 Primary = 1
May 10 04:03:16 forceWare user.notice fW: sfSidClustTopAddCB:2465 (pid=298): SID Cluster TLV parsing - TLV type 0x2f, length=0x58
May 10 04:03:16 forceWare user.notice fW: sfSidClustTopAddCB:2489 (pid=298): SID Cluster parsing (second pass) completed
May 10 04:03:16 forceWare user.notice fW: qos_regUtils_ParseAndUpdateQosParams:753 (pid=298): Number of active US Service Flow 1
May 10 04:03:16 forceWare user.notice fW: CHDB_Rx_RccSetActions:425 (pid=387): Rx Module [TunerInx:1]: RCP index 1 Actions : freq = 579000000 : Action = RESET
May 10 04:03:16 forceWare user.notice fW: CHDB_Rx_RccSetActions:478 (pid=387): Rx Channel [DS:4]: RCP index 4 Actions : freq = 597000000 : Action = BASIC-LOCK
May 10 04:03:16 forceWare user.notice fW: CHDB_Rx_RccSetActions:478 (pid=387): Rx Channel [DS:3]: RCP index 3 Actions : freq = 579000000 : Action = BASIC-LOCK
May 10 04:03:16 forceWare user.notice fW: CHDB_Rx_RccSetActions:478 (pid=387): Rx Channel [DS:2]: RCP index 2 Actions : freq = 585000000 : Action = BASIC-LOCK
May 10 04:03:16 forceWare user.notice fW: CHDB_Rx_RccSetActions:478 (pid=387): Rx Channel [DS:1]: RCP index 1 Actions : freq = 591000000 : Action = PRIMARY-LOCK
May 10 04:03:16 forceWare user.notice fW: DSM_act_SetChannelMonitors:268 (pid=312): Enable/Disable Channel Monitors.
May 10 04:03:16 forceWare user.notice fW: CHM_act_HandleChangeDsMonitorsResult:425 (pid=300): All required DS monitors were changed - continue to module and channel actions
May 10 04:03:16 forceWare user.notice fW: HAL_TunerMgrSetFrequency:224 (pid=300): HAL_TunerMgrSetFrequency - Tuner_DeviceId=1 freq=606000000 CBW=0
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:382 (pid=312): DS[1] Try to lock on primary DS 591000000Hz...
May 10 04:03:16 forceWare user.notice fW: HAL_DsChannelSetPrimary:526 (pid=312): Completed PHY_SetDsPrimaryChannel.
May 10 04:03:16 forceWare user.notice fW: HAL_DsRecieveChannelLock:665 (pid=312): Autodetect - modulation = 2.
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:382 (pid=309): DS[4] Try to lock on secondary DS 597000000Hz...
May 10 04:03:16 forceWare user.notice fW: CHDB_Rx_GetChannelID:1039 (pid=309): Could not find DCID for freq 0 (port 4)
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:412 (pid=309): Failed to Find DCID for DS Port 4.
May 10 04:03:16 forceWare user.notice fW: HAL_DsRecieveChannelLock:665 (pid=309): Autodetect - modulation = 2.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2451 (pid=312): 1 Passed Qam Lock.
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:382 (pid=310): DS[3] Try to lock on secondary DS 579000000Hz...
May 10 04:03:16 forceWare user.notice fW: CHDB_Rx_GetChannelID:1039 (pid=310): Could not find DCID for freq 0 (port 3)
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:412 (pid=310): Failed to Find DCID for DS Port 3.
May 10 04:03:16 forceWare user.notice fW: HAL_DsRecieveChannelLock:665 (pid=310): Autodetect - modulation = 2.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2480 (pid=312): 1 Passed FEC Lock.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2496 (pid=312): 1 Passed Mpeg Lock.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2556 (pid=312): DS recevier 1 lock successfully on DS frequency 591000000.
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:639 (pid=312): DS[1] Locked on primary DS 591000000Hz.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2451 (pid=309): 4 Passed Qam Lock.
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:382 (pid=311): DS[2] Try to lock on secondary DS 585000000Hz...
May 10 04:03:16 forceWare user.notice fW: CHDB_Rx_GetChannelID:1039 (pid=311): Could not find DCID for freq 0 (port 2)
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:412 (pid=311): Failed to Find DCID for DS Port 2.
May 10 04:03:16 forceWare user.notice fW: HAL_DsRecieveChannelLock:665 (pid=311): Autodetect - modulation = 2.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2480 (pid=309): 4 Passed FEC Lock.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2496 (pid=309): 4 Passed Mpeg Lock.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2556 (pid=309): DS recevier 4 lock successfully on DS frequency 597000000.
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:639 (pid=309): DS[4] Locked on secondary DS 597000000Hz.
May 10 04:03:16 forceWare user.notice fW: DSM_act_LockedSuccessEntry:789 (pid=309): DS PHY lock success.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2451 (pid=310): 3 Passed Qam Lock.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2480 (pid=310): 3 Passed FEC Lock.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2496 (pid=310): 3 Passed Mpeg Lock.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2556 (pid=310): DS recevier 3 lock successfully on DS frequency 579000000.
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:639 (pid=310): DS[3] Locked on secondary DS 579000000Hz.
May 10 04:03:16 forceWare user.notice fW: DSM_act_LockedSuccessEntry:789 (pid=310): DS PHY lock success.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2451 (pid=311): 2 Passed Qam Lock.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2480 (pid=311): 2 Passed FEC Lock.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2496 (pid=311): 2 Passed Mpeg Lock.
May 10 04:03:16 forceWare user.notice fW: HAL_LockReceiver:2556 (pid=311): DS recevier 2 lock successfully on DS frequency 585000000.
May 10 04:03:16 forceWare user.notice fW: DSM_act_StartLocking:639 (pid=311): DS[2] Locked on secondary DS 585000000Hz.
May 10 04:03:16 forceWare user.notice fW: DSM_act_LockedSuccessEntry:789 (pid=311): DS PHY lock success.
May 10 04:03:16 forceWare user.notice fW: DSM_act_CheckSyncConnectivity:1037 (pid=312): Stored SYNC-SA as MAC domain address [00:17:10:91:6f:23] in Docsis-DB.
May 10 04:03:16 forceWare user.notice fW: DSM_act_CheckSyncConnectivity:1039 (pid=312): Note: MDDs will be filtered by this SA.
May 10 04:03:16 forceWare user.notice fW: DSM_act_LockedSuccessEntry:789 (pid=312): DS PHY lock success.
May 10 04:03:16 forceWare user.notice fW: DCR_act_AcqTxChStart:94 (pid=387): Start TCC acquisition...
May 10 04:03:16 forceWare user.notice fW: DSM_act_SetChannelMonitors:268 (pid=312): Enable/Disable Channel Monitors.
May 10 04:03:16 forceWare user.notice fW: HAL_UsFwDownload_DynamicDownload:149 (pid=300): HAL_SendFWShutdown Success
May 10 04:03:16 forceWare user.notice fW: UsFwDownload:203 (pid=300): Entered UsFwDownload
May 10 04:03:16 forceWare user.notice fW: UsFwDownload:207 (pid=300): After HAL_Arm9InResetState
May 10 04:03:16 forceWare user.notice fW: UsFwDownload:212 (pid=300): change Arm state to reset
May 10 04:03:16 forceWare user.notice fW: UsFwDownload:215 (pid=300): After (isInReset == False)
May 10 04:03:16 forceWare user.notice fW: UsFwDownload:218 (pid=300): Load instruction file /usr/sbin/FwUpstreamDocsis3_I.bin to 0x100000
May 10 04:03:16 forceWare user.notice fW: UsFwDownload:227 (pid=300): Load data file /usr/sbin/FwUpstreamDocsis3_D.bin to 0x110000
May 10 04:03:16 forceWare user.notice fW: UsFwDownload:235 (pid=300): Configure ARM to Host interrupts
May 10 04:03:16 forceWare user.notice fW: UsFwDownload:248 (pid=300): change Arm state to out of reset
May 10 04:03:16 forceWare user.notice fW: HAL_CmdMbox_SendMboxReady:398 (pid=265): ICC_send_message
May 10 04:03:16 forceWare user.notice fW: HAL_CmdMbox_SendMboxReady:422 (pid=265): ICC_send_message
May 10 04:03:16 forceWare user.notice fW: HAL_EventMbox_ProcessMain:181 (pid=251): HAL_EventMbox_ProcessMain - Initialized Mbox Address
May 10 04:03:16 forceWare user.notice fW: WaitMboxReadyAndInitAddresses:474 (pid=252): Wait for mboxReady
May 10 04:03:16 forceWare user.notice fW: WaitMboxReadyAndInitAddresses:485 (pid=252): MboxReady received
May 10 04:03:16 forceWare user.notice fW: InitializeMboxAddress:447 (pid=252): MboxControl Address (FW) - 0x408c00
May 10 04:03:16 forceWare user.notice fW: InitializeMboxAddress:450 (pid=252): MboxControl Address (HOST) - 0x118c00
May 10 04:03:16 forceWare user.notice fW: InitializeMboxAddress:454 (pid=252): CmdMbox Address(FW) - 0x408c0c
May 10 04:03:16 forceWare user.notice fW: InitializeMboxAddress:457 (pid=252): CmdMbox Address(HOST) - 0x118c0c
May 10 04:03:16 forceWare user.notice fW: USM_StartRng:289 (pid=300): US[4] [UCID 6]: Start INIT-Ranging [sid 6060] [tech 0]...
May 10 04:03:16 forceWare user.notice fW: USM_StartRng:289 (pid=300): US[3] [UCID 5]: Start INIT-Ranging [sid 6060] [tech 0]...
May 10 04:03:17 forceWare user.notice fW: usm_handleRngRspStatus:1410 (pid=315): US[3] [UCID 5]: RNG-RSP CONTINUE.
May 10 04:03:18 forceWare user.notice fW: usm_handleRngRspStatus:1398 (pid=315): US[3] [UCID 5]: RNG-RSP SUCCESS.
May 10 04:03:18 forceWare user.notice fW: usm_handleRngRspStatus:1410 (pid=316): US[4] [UCID 6]: RNG-RSP CONTINUE.
May 10 04:03:19 forceWare user.notice fW: usm_handleRngRspStatus:1398 (pid=316): US[4] [UCID 6]: RNG-RSP SUCCESS.
May 10 04:03:19 forceWare user.notice fW: DCR_act_AcqTxChOK:139 (pid=387): TCC Acquisition complete.
May 10 04:03:19 forceWare user.notice fW: qos_regUtils_SfUpdateLowerLayer:1381 (pid=387): HAL/FW was updated with Service Flow parameters SFID=0x3ae5c0c1 sfIndex=0
May 10 04:03:19 forceWare user.notice fW: qos_regUtils_UpdateLowerLayers:831 (pid=387): ****** QOS update the lower layers exit - SUCCESS ******
May 10 04:03:19 forceWare user.notice fW: DCR_act_RegCompleteInit:334 (pid=387): DCR_act_RegCompleteInit: Pre-Registration DSID is 0x0.
May 10 04:03:19 forceWare user.notice fW: DCR_IfRegAckRequired:238 (pid=387): pt1.RegAck required
May 10 04:03:19 forceWare user.notice fW: DCR_act_RegAck:571 (pid=387): REG-ACK Sent.
May 10 04:03:19 forceWare user.notice fW: SnmpDb_UpdateAccessMode:2267 (pid=296): Working in SNMP V1/2c Only NmAccess mode
May 10 04:03:19 forceWare user.notice fW: Unable to open the NV config file: /etc/snmp_cm_nv_nmstrap.txt
May 10 04:03:19 forceWare user.notice fW: nmsNvCfgLoad:2452 (pid=296): Read the NMS traps NV config file: /etc/snmp_cm_nv_nmstrap.txt
May 10 04:03:19 forceWare user.notice fW: DMG_cond_IsBPI:601 (pid=335): BPI Enabled.
May 10 04:03:19 forceWare user.notice fW: DMG_act_StartBpi:1781 (pid=335): Start BPI...
May 10 04:03:19 forceWare user.notice fW: BpiDisabled_act_BpiStart:475 (pid=299): BPI Start: BPI mode is BPI+
May 10 04:03:19 forceWare user.notice fW: BpiAuthMsg_SendAuthInfo:317 (pid=299): Transmitting Auth Info message, len = 1095
May 10 04:03:19 forceWare user.notice fW: BpiDisabled_act_BpiStart:525 (pid=299): Auth info send complete
May 10 04:03:19 forceWare user.notice fW: authRequestCompose:202 (pid=299): Advertising AES capability, CSL list length=6
May 10 04:03:19 forceWare user.notice fW: BpiAuthMsg_SendAuthReq:380 (pid=299): Transmitting Auth Request message, len = 1116
May 10 04:03:19 forceWare user.notice fW: BpiDisabled_act_BpiStart:535 (pid=299): Auth req send complete
May 10 04:03:19 forceWare user.notice fW: HandleAuthReplyMsg:1675 (pid=298): Auth Reply received OK - Seq Number 1, Lifetime 604800
May 10 04:03:19 forceWare user.notice fW: BpiAuthMsg_HandleAuthReply:487 (pid=299): Auth Sequence number=1
May 10 04:03:19 forceWare user.notice fW: updateSaidsFromAuthReply:690 (pid=299): Setting SAID 6060 to be primary
May 10 04:03:19 forceWare user.notice fW: updateSaidsFromAuthReply:699 (pid=299): updateSaidsFromAuthReply: Adding SAID 6060, type=0, crypto suite=1, index=0
May 10 04:03:19 forceWare user.notice fW: BpiAuth_act_Entry:1232 (pid=299): Setting Auth Grace Timer to 604200 seconds
May 10 04:03:19 forceWare user.notice fW: BpiTekMsg_SendTekRequest:208 (pid=306): TEK SM 0: Transmitting Key Request message
May 10 04:03:19 forceWare user.notice fW: BpiCrypto_CalcAndCompareHmac:596 (pid=298): Calculated HMAC matched HMAC in message
May 10 04:03:19 forceWare user.notice fW: HandleKeyReplyMsg:1411 (pid=298): BPI: Received Key Reply OK. Number of TEKs is 2
May 10 04:03:19 forceWare user.notice fW: InstallDsKey:449 (pid=306): [InstallDsKey()]: Installed DS key:
May 10 04:03:19 forceWare user.notice fW: InstallDsKey:449 (pid=306): [InstallDsKey()]: Installed DS key:
May 10 04:03:19 forceWare user.notice fW: Gim_NotificationSend:289 (pid=335): nid=4096: type NRN with 0 bytes data
May 10 04:03:19 forceWare user.notice fW: TekOp_act_Entry:668 (pid=306): Setting TEK Grace timer for said index 0 to 39600 seconds
May 10 04:03:20 forceWare user.notice fW: DMG_act_OperationalNotify:543 (pid=335):
May 10 04:03:20 forceWare user.notice fW: DMG_act_OperationalNotify:545 (pid=335): *** INITIALIZATION COMPLETE - MODEM IS OPERATIONAL ***
May 10 04:03:20 forceWare user.notice fW: DMG_act_OperationalNotify:546 (pid=335):
May 10 04:03:33 forceWare user.notice fW: v4 wan0 7.0.60.11 161 active
May 10 04:03:33 forceWare user.notice fW: Entry Found 0x5ebb8, previos = 0x5eb60
May 10 04:03:33 forceWare user.notice fW: v4 wan0 7.0.60.11 162 active
May 10 04:03:33 forceWare user.notice fW: Entry Found 0x5ec10, previos = 0x5eb60
May 10 04:03:33 forceWare user.notice fW: v4 lan0 192.168.100.1 161 active
May 10 04:03:33 forceWare user.notice fW: Entry Found 0x5eb08, previos = 0x5e610
May 10 04:03:33 forceWare user.notice fW: v4 lan0 192.168.100.1 162 active
May 10 04:03:33 forceWare user.notice fW: Entry Found 0x5eb60, previos = 0x5e610
May 10 04:03:33 forceWare user.notice fW: SNMPA_CreateSocketEntry : type 1, addr = 7f000001, port = 163, ifname = lo List = 0x5e610
May 10 04:03:33 forceWare user.notice fW: setsockopt SO_BINDTODEVICE - failed
May 10 04:12:56 forceWare user.notice fW: qos_TaDb_AddNewTa:514 (pid=298): qos_TaDb_AddNewTa: DSX TA entry start add.
May 10 04:12:56 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=298): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 0, TA ID = 0x0.
May 10 04:12:56 forceWare user.notice fW: qos_TaDb_AddNewTa:541 (pid=298): qos_TaDb_AddNewTa: New DSX TA entry added to TA DB. DB Index = 0, TA ID = 0x839d.
May 10 04:12:57 forceWare user.notice fW: BpiCrypto_CalcAndCompareHmac:596 (pid=297): Calculated HMAC matched HMAC in message
May 10 04:12:57 forceWare user.notice fW: cmtsDsaReqSfTlvCheckCB:1113 (pid=297): DSA REQ: Check TLV type=0x19 Length=40
May 10 04:12:57 forceWare user.notice fW: qos_parser_checkSfTlv:486 (pid=297): qos_parser_checkSfTlv: TLV type=0x19 length=40
May 10 04:12:57 forceWare user.notice fW: cmtsDsaReqSfTlvCheckCB:1201 (pid=297): DSA REQ check resources. scheduleType 2
May 10 04:12:57 forceWare user.notice fW: qos_dsxCmts_checkBeSfResources:1011 (pid=297): DSX REQ - it is not upstream SF
May 10 04:12:57 forceWare user.notice fW: cmtsDsaReqSfTlvCheckCB:1211 (pid=297): DSA REQ: SF TLV checking successfully completed - SFID=0x3ae5e0c3
May 10 04:12:57 forceWare user.notice fW: cmtsDsaReqClsfTlvCheckCB:1223 (pid=297): DSA REQ: Check TLV type=0x17 Length=22
May 10 04:12:57 forceWare user.notice fW: qos_parser_checkClsfTlv:545 (pid=297): qos_parser_checkClsfTlv: TLV type=0x17 length=22
May 10 04:12:57 forceWare user.notice fW: cmtsDsaReqClsfTlvCheckCB:1267 (pid=297): DSA REQ: Classification TLV checking was successfully completed - SFID=0x3ae5e0c3, Clsf ID=53
May 10 04:12:57 forceWare user.notice fW: qos_dsxCmts_AnalyzeReqBuffer:316 (pid=297): CMTS DSX REQ was successfully checked; TA type=0 TA DB index=0
May 10 04:12:57 forceWare user.notice fW: cmtsDsaReqSfTlvParseCB:1415 (pid=297): DSA REQ: TLV type=0x19 Length=40
May 10 04:12:57 forceWare user.notice fW: qos_parser_parseSfTlv:728 (pid=297): qos_parser_parseSfTlv: TLV type=0x19 length=40
May 10 04:12:57 forceWare user.notice fW: qos_mainDb_AddServiceFlow:463 (pid=297): SF was added to QOS main DB, SfId=0x3ae5e0c3, direction=1, DB index=2 Primary = 0
May 10 04:12:57 forceWare user.notice fW: cmtsDsaReqClsfTlvParseCB:1511 (pid=297): DSA REQ: Parse TLV type=0x423d568 Length=23
May 10 04:12:57 forceWare user.notice fW: qos_parser_parseClsfTlv:783 (pid=297): qos_parser_parseClsfTlv: TLV type=0x17 length=22
May 10 04:12:57 forceWare user.notice fW: set_Class_params:2538 (pid=297): Classifier was added to QOS main DB, Id=0x35, SfId=0x3ae5e0c3, direction=1, DB index=0
May 10 04:12:57 forceWare user.notice fW: qos_dsxCmts_AnalyzeReqBuffer:362 (pid=297): CMTS DSX REQ analysis success - DSX TA type=0 TA DB index=0
May 10 04:12:57 forceWare user.notice fW: qos_intDb_UpdateSfOnTaSucceeded:1690 (pid=297): Update internal SF DB on DSX TA success; TA index=0, TA type=0
May 10 04:12:57 forceWare user.notice fW: send_NotifyQosChanges:1308 (pid=297): Sending of QOS notification message failed
May 10 04:12:57 forceWare user.notice fW: qosDsx_SendUserNotification:925 (pid=297): Currently cannot send DSX notification for TA DB index=0, notifType=4, ConfCode=0, authBlockLen=0
May 10 04:12:57 forceWare user.notice fW: qos_intDb_ResetTaDbRow:144 (pid=297): qos_intDb_ResetTaDbRow: DSX TA entry removal. DB Index = 0, TA ID = 0x839d.

~~occalifornia~~ · 10-05-2017, 07:28 AM

Have you tried asking your ISP for help?

doctor · 10-05-2017, 04:20 PM

yes I've been on the phone with tech support since 8am I'm reading Kumar my sys log line by line. Im on line 138.

~~occalifornia~~ · 10-05-2017, 05:57 PM

(10-05-2017, 04:20 PM)doctor Wrote: yes I've been on the phone with tech support since 8am I'm reading Kumar my sys log line by line. Im on line 138.

and what did tech support say thus far?

The log you posted is incomplete.

~~occalifornia~~ · (This post was last modified: 10-05-2017, 08:44 PM by occalifornia.)

(10-05-2017, 07:00 PM)doctor Wrote: I hear music on the phone while im reading him the lines. weird.

thats all of the sys log , checked it twice, but i have the docsis log if that matters

Right. You should give your ISP a call. Your modem is being rejected from the network. Feel free to mention to them you have 'valid certs with matching mac'. Smile

~~occalifornia~~ · 13-05-2017, 08:37 AM

What did your ISP say when you showed them this log?

doctor · 13-05-2017, 05:24 PM

they said they werent aware that the cm issued to me can log such great detail.

newname · 14-05-2017, 01:25 AM

hahaha.......ISP's.........

~~occalifornia~~ · 14-05-2017, 05:37 AM

(13-05-2017, 05:24 PM)doctor Wrote: they said they werent aware that the cm issued to me can log such great detail.

Are they aware you're running a SB5101 with Haxorware?

doctor · 14-05-2017, 05:02 PM

no that didnt come up in the conversation.

Login
Username:
Password:	Lost Password?
	Remember me