hi im new and any advice help

[darrenmma]

can anyone help a new guy??? I havent used these modems for quite a long time....recently hard times vermin cut off .... so go back out my webstar epc2100 r2 ....... found an old mac to get me online here at speed of 0.15 :/ lol.....can anyone give me any tips hints or where to learn from ? settings are - Im on haxorware R39 BPI + docsis 1.1 , disable firmware, force network , upstream channel 3 , model as 5101 - SB5101-2.7.6.0-GA-00-NOSH , and currently on Name 69834ncxv9873254k;fg
Size 72 bytes ,Compliance DOCSIS 1.0........ anyone want to help much appreciate it, i am in wolverhampton cpc2-wolv2-0-0-cust135.wolv.cable.virginm.net thankyou in advance to anyone who helps me

[Box3r]

can anyone help a new guy??? I havent used these modems for quite a long time....recently hard times vermin cut off .... so go back out my webstar epc2100 r2 ....... found an old mac to get me online here at speed of 0.15 :/ lol.....can anyone give me any tips hints or where to learn from ? settings are - Im on haxorware R39 BPI + docsis 1.1 , disable firmware, force network , upstream channel 3 , model as 5101 - SB5101-2.7.6.0-GA-00-NOSH , and currently on Name 69834ncxv9873254k;fg
Size 72 bytes ,Compliance DOCSIS 1.0........ anyone want to help much appreciate it, i am in wolverhampton cpc2-wolv2-0-0-cust135.wolv.cable.virginm.net thankyou in advance to anyone who helps me

hey mate , im with vermin myself pal i had alot of problems same as yourself with 72 Bytes ! Annoying Isn't It
all i do mate is , have a play with stealth settings , and different mac's ... keep trying and will you will see light at the end of the tunnel ... <- Thats What I Did On My 2100r2

<------------------------------------------------------>
***************HAXORWARE COMMAND *************
cm_hal/scan_stop
cd non-vol
cd docsis
enable docsis11 true
enable bpi false
bpi_version 0
enable bpi true
write
cd /

cd non-vol
cd halif
mac_address 1 00:XX:XX:XX:XX:C2
mac_address 3 00:XX:XX:XX:XX:C3 <-Plus 1 Digit
write
cd /
reset
***************HAXORWARE COMMAND *************
*************************************************



I Have a VMDG480 Now ..
ive changed all the SysName -SysDesc , from VMDG480 TO Scientific Atlanta with epc stealth model ...
i use this command to change my mac .. and boom 20 meg first mac i tried


<------------------------------------------------------>
***********SUPERHUB COMMAND*************
/cm_hal/scan_stop
/non-vol/docsis/enable docsis11 true
/non-vol/docsis/bpi_version 0
/non-vol/docsis/write
/non-vol/halif/mac_address 1 00:XX:XX:XX:XX:C2
/non-vol/halif/mac_address 3 00:XX:XX:XX:XX:C3 <- End Plus 1 As Shown
/non-vol/write
/non-vol/snmp/docsDevSerialNumber 00XXXXXXXXC2
/non-vol/snmp/write
/reset
reset
***********SUPERHUB COMMAND*************


Sorry About The Format But .. Thats What I Do Good Luck !