Login

wizapol · 25-07-2015, 07:40 AM

Hi and thanks in advance for any information.

I have a 5101 modem with haxor 1.1 r39, my ISP uses BPI+ 1.1.

I had my modem working without issues or reboots for a while my configs were not encripted and i was able to force the config file directly in to haxorware to uncap my current speed, also i have a few certz wich they worked (4 lights on CM) but they had no speed or arround 52kb, however i was able to force the config file to get my desired speed on those certz (i wasnt able to edit the config file cuz they where password protected), now recently got new security in my area and my configs are encripted now, im still able to download them and read them but i havent been able to force them, i got on haxor log:
Neg Or Bad Reg Rsp - Reinitialize MAC...
modem restarts over and over, my first question is:
Can someone tell me what to do to be able to force again my configs? (it is possible?) someting i could read or some pointers that i can get?, ty.

.. so well, when that happend i went over my Certz with speed and CM connects without issues... BUT... since that day my modem gets rebooted every 20 mins or so, mostly in the afternoons, is really random but not at nights not a single time, this for me is sooooo weird and confusing Huh

, on haxor event log i get:

Notice M573.0 Modem Is Shutting Down and Rebooting...
Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out

...so i went to telnet and i got this: "Bandwidth request failure! Status = 0"

Here is the telnet log:

-----------------------------------------

Haxorware integrated telnet daemon

Username: root
Password: *****
Welcome.

CM>
CM> run
CM>
CM> run_app

Running the system...

BcmCmDocsisStatusEventCodes::kCmIsNotOperational
CamDeleteAddress: Deleted address from cam segment 0

CM> Non-Vol Settings successfully written to the device.

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17

mot_scanList: Setting override freq @ 7000000
Scanning DS Channel at 7000000 Hz... (Initial target freq)

mot_scanList: Setting override freq @ 0
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 501000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 507000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 513000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 519000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 525000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 531000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 537000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 543000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 549000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 555000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 561000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 567000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 573000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 579000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 585000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 591000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 597000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 603000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 609000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 615000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 621000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 627000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 633000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 639000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 645000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 651000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 657000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 663000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 669000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 675000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 681000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 687000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 693000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 699000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 705000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 711000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 717000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 723000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 729000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 735000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 741000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 747000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 753000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 759000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 765000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 771000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 777000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 783000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 789000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 795000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 801000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 807000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 813000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 819000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 825000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 831000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 837000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 843000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 849000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 855000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 93000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 99000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 105000000 Hz, QAM64
Favorite[0].freq = 129000000
Attempting Downstream FEC lock @ freq= 129000000 Hz, QAM64/256

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 129000000 Hz
Carrier Offset = 1 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x15171312
Power Level = 1 dB
QAM = LOCKED
FEC = LOCKED
******************************************

CM> Selecting UCD for Us Channel 3

RNG-RSP Adj: tim=2441 power=0 freq=0 Stat=Continue

RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue

RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue

RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue

RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 37000000 Hz
Upstream Power = 45 dBmV
Ranging SID = 0x1b67
Upstream Symbol Rate = 2560000 sym/sec
******************************************

Starting IP Initialization with DHCP...

CM> ARPing for default GW IP = 10.112.64.1
MAC = 50:57:a8:89:bc:d9
DHCP completed successfully!
DHCP: IP address = 10.112.74.241

Starting Time Of Day...
SNMP Agent Binding to 10.112.74.241:225
Current system time -> Fri Jul 24 05:52:08 2015

System start time -> Fri Jul 24 01:36:43 2015

Starting Tftp of configuration file...
tftp-enforce bypass is DISABLED
Storing received cfg of size 460 to memory
Motorola vendor ID
TLV-11[1]: 1.3.6.1.2.1.69.1.3.3.0 -> 2 (i32)
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.2.7 -> 10.0.0.0
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.3.7 -> 255.0.0.0
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.4.7 -> public
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.5.7 -> 2 (i32)
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.6.7 -> @
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.7.7 -> 4 (i32)
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.2.8 -> 10.0.0.0
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.3.8 -> 255.0.0.0
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.4.8 -> private
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.5.8 -> 3 (i32)
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.6.8 -> @
TLV-11[13]: 1.3.6.1.2.1.69.1.2.1.7.8 -> 4 (i32)
Time Of Day completed...
SB5101 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.112.74.241:225
13 TLV-11's OK.
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Sending syslog message from IF 1 to 127.0.0.1:
<133> CABLEMODEM [Motorola Corporation]: <2300955924> Modem Is Shutting Down and Rebooting...
Bandwidth request failure! Status = 0

----------------------LOG ENDS---------------------------------

I will be more than happy if someone could share his knowledge with me, i can provide you with anything you might need, i have some info on my hands but nothing have worked so far...

Thanks.

wizapol · (This post was last modified: 25-07-2015, 11:25 AM by wizapol.)

(25-07-2015, 08:19 AM)Ziricom Wrote: Starting Tftp of configuration file...
tftp-enforce bypass is DISABLED

I'm assuming your ISP is now enforcing that their TFTP Server be used to obtain config files, I see your TFTP Enforce Bypass is Disabled. Did you try enabling it?

If that does not work did you try Auto serving?

Ty for reply Ziricom, yes i have, tried the ENABLED option and I got an unknow error by my ISP; "Bypass failed.Error Unknown", on bottom is a part of the log for when is enabled.

This is how i see my config files names right now: " d;kfoA,.iyewrkldJKDHSUBsgvca69834ncxv9873254k;fg87d ".

And when i try to Auto serve my config file my CM reboots over and over, haxor log gives me: " Neg Or Bad Reg Rsp - Reinitialize MAC... "

and in this log im actually trying to "Force Config File" in haxorwere using my ISP Tftp server IP and the name of the Configs, btw i have tryed the new ones (the encrypted ones, dint work,,,, the Pre new security ones wich you might see on the log " ^1/E466C9AA/Inter.Resid.20Mbps/Moto/Common-Settings ", that was the config i was Auto serving for my internet speed.

As you might see on the log my CM is operational and i have internet BUT only at my base speed, wich is 12mbps, even when the modem log says is "forcing" the 20mbps config file, so what i mean is that my "stock" ISP config file is the one active and not the one im providing.

Any thoughts?

/////////////////telnet log////////////////////

Starting IP Initialization with DHCP...

CM> ARPing for default GW IP = 10.112.64.1
MAC = 50:57:a8:89:bc:d9
DHCP completed successfully!
DHCP: IP address = 10.112.81.46

Starting Time Of Day...
SNMP Agent Binding to 10.112.81.46:225
Current system time -> Sat Jul 25 03:48:54 2015

System start time -> Sat Jul 25 03:47:47 2015

Starting Tftp of configuration file...
tftp-enforce bypass is using 10.112.64.1:d;kfoA,.iyewrkldJKDHSUBsgvca69834ncxv9873254k;fg87d
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass failed.Error Unknown
Forcing Config File name to ^1/E466C9AA/Inter.Resid.20Mbps/Moto/Common-Settings
Storing received cfg of size 460 to memory
Motorola vendor ID
TLV-11[1]: 1.3.6.1.2.1.69.1.3.3.0 -> 2 (i32)
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.2.7 -> 10.0.0.0
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.3.7 -> 255.0.0.0
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.4.7 -> public
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.5.7 -> 2 (i32)
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.6.7 -> @
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.7.7 -> 4 (i32)
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.2.8 -> 10.0.0.0
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.3.8 -> 255.0.0.0
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.4.8 -> private
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.5.8 -> 3 (i32)
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.6.8 -> @
TLV-11[13]: 1.3.6.1.2.1.69.1.2.1.7.8 -> 4 (i32)
Time Of Day completed...
SB5101 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.112.81.46:225
13 TLV-11's OK.
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational

/////////////////telnet log ends////////////////////

wizapol · 25-07-2015, 01:08 PM

(25-07-2015, 11:24 AM)Ziricom Wrote: Mind sending me the new encrypted config? send it in PM please i wanna take a look at it. also the old configs also were encrypted just as an FYI. so when you put in the name "^1/E466C9AA/Inter.Resid.20Mbps/Moto/Common-Settings " your telling it to look for a config that doesn't even exist. unless you have that config on your own "server" with that name. My ISP encrypts their configs in a similar way you used to but its just ^1/RANDOMSHIT/ those numbers and letters are not static.

Tnx, always Good to know more, Pm on the way!
tell me what do u think

cayman · 26-07-2015, 02:06 AM

hey , first of all,
1.change your MAC of lan card, every time you try to get on line
2. change the name of comp and its ID #, it is something like over 20 digits, get Hiren disk/utilities, u find there some programs that might do it with one click
3.your cfg and/or cert has to be named according to your ISP provider naming convention

Remember, after a few tryings to get on line, ISP provider might ban your comp, your lan card and who knows what else.

It is new security now, and if u been on some sites, which are not so legit, then those sites might be monitored and IP's logged.

If somebody reported your IP to your ISp, then if u don't know how to get on line, you better try another comp.

On some modems your ISP even put name of your comp and other ID's, is hard to tell what ID's, has to know your provider.

And after each try, copy full image of your modem and read it, delete some crap, and delete all msges.

It is new security and it is not that easy to get on line nowdays

wizapol · 26-07-2015, 06:52 AM

(26-07-2015, 02:06 AM)cayman Wrote: hey , first of all,
1.change your MAC of lan card, every time you try to get on line
2. change the name of comp and its ID #, it is something like over 20 digits, get Hiren disk/utilities, u find there some programs that might do it with one click
3.your cfg and/or cert has to be named according to your ISP provider naming convention

Remember, after a few tryings to get on line, ISP provider might ban your comp, your lan card and who knows what else.

It is new security now, and if u been on some sites, which are not so legit, then those sites might be monitored and IP's logged.

If somebody reported your IP to your ISp, then if u don't know how to get on line, you better try another comp.

On some modems your ISP even put name of your comp and other ID's, is hard to tell what ID's, has to know your provider.

And after each try, copy full image of your modem and read it, delete some crap, and delete all msges.

It is new security and it is not that easy to get on line nowdays

Thanks for reply Cayman, wow, i dint know they can do all that, i will take my time to cover my steps, scary hehe

**drewmerc** · 26-07-2015, 07:24 AM

flash the diag version of hax, your posting telnet logs from the lite version and its missing all the relevant info needed

wizapol · 26-07-2015, 07:40 AM

(26-07-2015, 07:24 AM)drewmerc Wrote: flash the diag version of hax, your posting telnet logs from the lite version and its missing all the relevant info needed

Ups, totally my mistake, First, Thanks for Reply Drewmerc, yes i did that allready and here is the new log, BTW i took some forward steps, MR. Ziricom pointed me on the right track (Thanks ALOT Mate!) and here is my new status regarding config files*, on tftp server i get this error:

"Error:RecvFrom Returns 10040 <"A message sent on a datagram socket was larger than
the internal message buffer or some other network limit, or the buffer used to
receive a datagram into was smaller than the datagram itself."

Any ideas of how to resolve that? is like a damn brick wall, i increased my MTU size on my ethernet card, but i dont think is on my Server side cuz i can "get" and "put" files on server using a Client no problems at all,

///////////TELNET LOG DIAG////////////////////

Haxorware integrated telnet daemon

Username: root
Password: *****
Welcome.

CM>
CM> run
CM>
CM> run_app

Running the system...

Beginning Cable Modem operation...

CM> Deleting DOCSIS 1.0 CoS Settings for SID 0x1ea6
0x0007882a [CmDocsisCtlThread] BcmDocsisCmHalIf: Big Grin

eleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
DHCPc: Releasing the lease with client id htype=1, value=00:22:ce:79:da:3f
0x0007882a [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.112.94.39 from IP stack 1
0x00078834 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x00078834 [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0, Gateway=0.0.0.0
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x0007892e [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x00078938 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x00078942 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncStop: (CmDocsisCtlThread)

*
* Locking off-frequency so that we don't receive any
* messages or data. Ignore the scan messages that follow...
*

0x00078942 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 7000000
Scanning DS Channel at 7000000 Hz... (Initial target freq)
0x00078942 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 99000000 Hz, QAM256
Found energy at frequency 99000000Hz! Publishing event kEventEnergyDetected...
Attempting Downstream FEC lock @ freq= 105000000 Hz, QAM256

CM> Attempting Downstream FEC lock @ freq= 111000000 Hz, QAM256
0x00078d98 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread)
CM did not lock to target ds freq. Non-zero target us chan id
no longer applies. Setting target us to 0.
0x00078d98 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 111000000 Hz
Carrier Offset = 1 Hz
Symbol rate = 5360537 sym/sec
SNR = 37 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x1549a7ae
Power Level = 0 dB
QAM = LOCKED
FEC = LOCKED
******************************************

CM> Selecting UCD for Us Channel 3

0x0007a436 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x0007a6ca [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x0007a6ca [CmDocsisCtlThread] BcmCmDocsisCtlThread: Big Grin

sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using default initial upstream power = 8.0 dBmV
0x0007a6ca [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM>
RNG-RSP Adj: tim=2446 power=46 freq=0 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 37000000 Hz
Upstream Power = 45 dBmV
Ranging SID = 0x1ea6
Upstream Symbol Rate = 2560000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc: Waiting 2 seconds before sending Discover; client id htype=1, value=00:22:ce:79:da:3f
Not logging event ID 2307948624, control for level 7 is 0.

CM> DHCPc: Sending Discover packet; client id htype=1, value=00:22:ce:79:da:3f
DHCPc: Received an Offer from DHCP server 50:57:a8:89:bc:d9 (10.112.0.1); lease client id htype=1, value=00:22:ce:79:da:3f

Instance: IP Stack1 (0x806a109c)

Releasing lease for client id htype=1, value=00:22:ce:79:da:3f
DHCPc: Releasing the lease with client id htype=1, value=00:22:ce:79:da:3f
0x0007c132 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.112.111.143 from IP stack 1
0x0007c132 [DHCP Client Thread] BcmEcosIpHalIf: Big Grin

eleteRoute: (IP Stack1 HalIf) ERROR - SIOCDELRT: errno=3 bcm0'!
0x0007c132 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) ERROR - DeleteRoute failed for interface:bcm0'!

Instance: IP Stack2 (0x8069f5ec)

Releasing lease for client id htype=1, value=00:22:ce:79:da:3f

CM/IpHal> ipconfig
CM/IpHal>
CM/IpHal> ipconfig 1 static 10.112.94.39 255.255.252.0 10.112.64.1
CM/IpHal> ipconfig 1 static 10.112.94.39 255.255.252.0 10.112.64.1

WARNING: This will be applied to all 2 registered instances!
Do you really want to do this? (yes|no) [no] y

Instance: IP Stack1 (0x806a109c)

Configuring static lease for IP Stack1...
Current IP address is default 0.0.0.0.
0x0007c240 [ConsoleThread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.112.94.39 (primary IP address)
Subnet Mask = 255.255.252.0
Router = 0.0.0.0
IsPrimaryInterface = 1

ARPing for default GW IP = 0.0.0.0
MAC = 00:00:00:00:00:00
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.112.94.39, Subnet=255.255.252.0, Gateway=0.0.0.0
DHCP completed successfully!

DHCP Settings:
Client Id = htype=1, value=00:22:ce:79:da:3f
State = Renewing (5)
Static Lease = 1
AutoConfig Mode = IP, Subnet and Router
XID = 0x1a8f4332
Number of Tries = 1
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:00:00:00:00:00
Ignore NAKs = 0
My offered IP address = 10.112.94.39 (primary IP address)
(1) Subnet Mask = 255.255.252.0
(3) Router IP address = 0.0.0.0
Alternate Router IP Addr = 10.112.64.1
(54) DHCP Server IP address = 0.0.0.0
(82) Relay Agent IP address = 0.0.0.0
TFTP Server IP address = 0.0.0.0
CM Configuration file = ''
(2) UTC Time Offset = 0 seconds
(4) Time Server IP address =
(6) Domain Name Server =
(7) Log Server IP address =
(51) Lease time = 0 seconds
(58) T1 (renew) = 0 seconds
(59) T2 (rebind) = 0 seconds
Lease is infinite = 0

CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.112.94.39
Time server not specified!
Forcing Time Of Day to accept Jan 1, 1970...
Current system time -> Thu Jan 01 00:00:00 1970

System start time -> Wed Dec 31 23:51:32 1969

Starting Tftp of configuration file...
DHCP is enabled but FORCE the use of non-vol specified config file!...
Opening file '^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings' on 192.168.100.2 for reading...
SNMP Agent Binding to 10.112.94.39:225
tftp-enforce bypass is using 192.168.100.2:^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings
Initiating fake TFTP Get (tftp-enforce bypass)
Not logging event ID 2291949724, control for level 7 is 0.

Instance: IP Stack2 (0x8069f5ec)

Configuring static lease for IP Stack1...
0x0007c2e0 [ConsoleThread] BcmDhcpClientIf::ConfigureStaticLease: (DHCP ClientIf for IP Stack1) ERROR - The lease is not in initial state! You must release the lease before trying to configure a static lease!
ERROR - failed to configure static lease!

CM/IpHal> cd
CM/IpHal>
CM/IpHal> cd /
CM/IpHal> cd /

Active Command Table: CM DOCSIS Commands (CM)

CM

CM> Bypass failed.Error Operation timed out
Forcing Config File name to ^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings
BcmComputeDefaultGatewayIpAndMacAddr(): No arp target selected; host not reachable!
ether_output: No arp target selected; host not reachable!
0x0007d668 [CmDocsisIpThread] BcmEcosSocket::Sendto: ERROR - SOCKET_ERROR: 365
0x0007d668 [CmDocsisIpThread] Tftp Client::Send: (Tftp Client) ERROR - Sendto() failed to (192.168.100.2) on port (TFTP 69)
0x0007d668 [CmDocsisIpThread] BcmCmDocsisIpThread::TftpConfigFile: (CmDocsisIpThread) ERROR - Failed to open the file on the TFTP server!
0x0007d668 [CmDocsisIpThread] BcmCmDocsisIpThread::TftpConfigFile: (CmDocsisIpThread) WARNING - TFTP object returned unknown error 0. Treating as 'file not found'.
0x0007d668 [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) ERROR - Failed to read the config file, or it was rejected by the client!
0x0007d668 [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) ERROR - Will try again later...(after 20 seconds).
0x0007d672 [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) WARNING -
**
*
* Using non-DOCSIS compliant TFTP retry timeout value from nonvol!
* DOCSIS requires 600 seconds!
*
**

Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Logging event: TFTP failed - configuration file NOT FOUND
Not logging event ID 2291949324, control for level 7 is 0.

CM> Starting Tftp of configuration file...
DHCP is enabled but FORCE the use of non-vol specified config file!...
Opening file '^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings' on 192.168.100.2 for reading...
tftp-enforce bypass is using 192.168.100.2:^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings
Initiating fake TFTP Get (tftp-enforce bypass)

CM> Bypass failed.Error Operation timed out
Forcing Config File name to ^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings
BcmComputeDefaultGatewayIpAndMacAddr(): No arp target selected; host not reachable!
ether_output: No arp target selected; host not reachable!
0x00083824 [CmDocsisIpThread] BcmEcosSocket::Sendto: ERROR - SOCKET_ERROR: 365
0x00083824 [CmDocsisIpThread] Tftp Client::Send: (Tftp Client) ERROR - Sendto() failed to (192.168.100.2) on port (TFTP 69)
0x00083824 [CmDocsisIpThread] BcmCmDocsisIpThread::TftpConfigFile: (CmDocsisIpThread) ERROR - Failed to open the file on the TFTP server!
0x00083824 [CmDocsisIpThread] BcmCmDocsisIpThread::TftpConfigFile: (CmDocsisIpThread) WARNING - TFTP object returned unknown error 0. Treating as 'file not found'.
0x00083824 [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) ERROR - Failed to read the config file, or it was rejected by the client!
0x00083824 [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) ERROR - Will try again later...(after 20 seconds).
0x0008382e [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) WARNING -
**
*
* Using non-DOCSIS compliant TFTP retry timeout value from nonvol!
* DOCSIS requires 600 seconds!
*
**

Logging event: TFTP failed - configuration file NOT FOUND

///////////////////////LOG ENDS////////////////////////////////////////

Big Grin

wizapol · 26-07-2015, 08:14 AM

Quote:Looks like it is having trouble contacting the TFTP or getting the config for some reason or another.

it seems that way, im researching how to get that error 10040 fix, i think is on the modems side but i have to keep testing.

going to be a looong night Xd

wizapol · 26-07-2015, 08:39 AM

(26-07-2015, 08:30 AM)Ziricom Wrote:
(26-07-2015, 08:14 AM)wizapol Wrote:
Quote:Looks like it is having trouble contacting the TFTP or getting the config for some reason or another.

it seems that way, im researching how to get that error 10040 fix, i think is on the modems side but i have to keep testing.

going to be a looong night Xd

you want a long night? try writing a few thousand lines of code in an attempt to finish a website you promised people months ago would be finished because you have nothing better to do......Note my avatar

First Round of Coffe is on me hehe, love your avatar, i do picture alot of that in the near future Tongue

wizapol · 30-07-2015, 11:06 AM

soo, i changed my cert for a fresh one no reboots, but i would love to force configs, im some one could help me with that detail pls? i used tftp server but i got 10040 error, cannot pass that on auto serve got from CM log, Neg or bad response and my modem reboots,
could some one help me?? Sad

Login
Username:
Password:	Lost Password?
	Remember me