Netgear test thread

[andy m]

am goner see if a can get me hands on V2 MODEM now

has the v2 got a on / off switch on the back

[andy m]

have you been on UGM

[Canis-Major]

yes, and I believe the structure of the 8mb is different, board revision 0 GP 800445, sticker state's: E08C015T02 LF

And dont be thinkin am havin a go at ya mate, I could write a book before i get to the point lol, but what I think has actually happened is the image I have that actually works the best on this is the v1 image, hence missing directory's.. so in practice, if this was all I had to work on, I would literally have to re-write the directory's and put the missing files where they should be. This would be a better learning experience, as I learn how to make that script work in the uk, cause after that, am gonna attempt to get forceware tuner's sorted for uk, if they aint been, and starting off in puma by re-writing directory's is the perfect way to learn..

---

So much for netgear thread, lol.. ah well, I'll use my knowledge gained from netgear's here, pmsl..

---

have you been on UGM

Years ago when it was an open site, but never posted..

[andy m]

good luck with forceware

[mickmc68]

@ CM this any good to you

Mick
  VMNG300 DUMP (MX25L6405D).bin (Size: 8 MB / Downloads: 18)

[Canis-Major]

On it right now

Starting LZMA Uncompression Algorithm.
Compressed file is LZMA format.
Linux version 2.6.18_pro500 (root@mv.ambit.com.tw) (gcc version 4.2.0 20070126 (prerelease) (MontaVista 4.2.0-2.0.0.custom 2007-02-12)) #1 PREEMPT Fri Feb 13 18:18:05 CST 2009
CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv6TEJ), cr=00c538ff
Machine: puma5
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writethrough
Reserved 0k DSP memory starting from Physical 0x82000000
CPU0: D VIPT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Real-Time Preemption Support © 2004-2006 Ingo Molnar
Built 1 zonelists. Total pages: 8192
Kernel command line: root=/dev/mtdblock6 mtdparts=sfl0:0x20000(U-Boot)ro,0x10000(env1),0x10000(env2),0x3b0000@0x40000(UBFI1),0x3b0000@0x3f0000(UBFI2),0xc747c@0x3f0f84(Kernel),0x1f9400(RootFileSystem),0x50000@0x7b0000(nvram) console=ttyS0,115200n8 ethaddr0=00:01:02:03:04:05
WARNING: experimental RCU implementation.
Interrupt controller revision : 4e822100
PID hash table entries: 256 (order: 8, 1024 bytes)
Power & Sleep Controller @ 0xd8621000 Initialized [id-0x44822905]
Initialized Peripheral Port Remap Register to base : 0x50000000
Puma5 Timer0 initialized
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 30040KB available (1836K code, 490K data, 76K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Off chip memory allocated: 153088
QMgr Init: buffer after alignment: 80340000
avalanche_ppd_init: PP system initialized successfully.
avalanche_ppd_init(496):return code 0x00
HIL Core: Profile intrusive has been Loaded.
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 3, 32768 bytes)
TCP bind hash table entries: 512 (order: 1, 14336 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered (default)
watchdog: TI Avalanche Watchdog Timer: timer margin 42 sec
TI LED driver initialized [major=254]
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO map 0x8610f03 mem 0xd8610f03 (irq = 8) is a TI 16550A
serial8250: ttyS1 at MMIO map 0x8610e03 mem 0xd8610e03 (irq = 7) is a TI 16550A
loop: loaded (max 8 devices)
Loading cpgmac driver for puma5
TI CPGMAC_F Linux DDA version 0.1 - CPGMAC_F DDC version 0.2
Cpmac: Installed 1 instances.
i2c /dev entries driver
Serial Flash [Bus:0 CS:0] : mx25l6405 8192KB, 128 sectors each 64KB
8 cmdlinepart partitions found on MTD device sfl0
partitions[0] = {.name = U-Boot, .offset = 0x00000000,.size = 0x00020000 (128K) }
partitions[1] = {.name = env1, .offset = 0x00020000,.size = 0x00010000 (64K) }
partitions[2] = {.name = env2, .offset = 0x00030000,.size = 0x00010000 (64K) }
partitions[3] = {.name = UBFI1, .offset = 0x00040000,.size = 0x003b0000 (3776K) }
partitions[4] = {.name = UBFI2, .offset = 0x003f0000,.size = 0x003b0000 (3776K) }
partitions[5] = {.name = Kernel, .offset = 0x003f0f84,.size = 0x000c747c (797K) }
partitions[6] = {.name = RootFileSystem, .offset = 0x004b8400,.size = 0x001f9400 (2021K) }
partitions[7] = {.name = nvram, .offset = 0x007b0000,.size = 0x00050000 (320K) }
Creating 8 MTD partitions on "sfl0":
0x00000000-0x00020000 : "U-Boot"
0x00020000-0x00030000 : "env1"
0x00030000-0x00040000 : "env2"
0x00040000-0x003f0000 : "UBFI1"
0x003f0000-0x007a0000 : "UBFI2"
0x003f0f84-0x004b8400 : "Kernel"
mtd: partition "Kernel" doesn't start on an erase block boundary -- force read-only
0x004b8400-0x006b1800 : "RootFileSystem"
mtd: partition "RootFileSystem" doesn't start on an erase block boundary -- force read-only
0x007b0000-0x00800000 : "nvram"
Serial Flash [Bus:0 CS:1] : No device found
ti_spi.0: AVALANCHE SPI Controller driver at 0xd8612500 (irq = 0)
ti_codec_spi.0: TI Codec SPI Controller driver at 0xd86040c8 (irq = 0)
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
VFS: Mounted root (squashfs filesystem) readonly.
Freeing init memory: 76K
docsis_mng: module license 'Texas Instruments' taints kernel.
Ingress Hook on eth0
Dbridge Init SUCSESS
Autoconfiguration disabled for br0
HAL_MacDsUnicastDataFilterAdd: system_rev = 1
Autoconfiguration disabled for lbr0
HAL_MacDsUnicastDataFilterAdd: system_rev = 1
Autoconfiguration disabled for lan0
Error: Unable to create VPID -1 PID -1 Device lbr0
HAL_MacDsUnicastDataFilterAdd: system_rev = 1
Autoconfiguration disabled for wan0
Autoconfiguration disabled for cni0
Autoconfiguration disabled for wan0
Autoconfiguration disabled for wan0
Autoconfiguration disabled for wan0

Error: Unable to create VPID -1 PID -1 Device lbr0 = hence no ethernet to pc.

[mickmc68]

So no good ? il see what else i have on it

Mick

[andy m]

any good

[Canis-Major]

it's obvbiously flashed, but retained setting's from somwhere.. the error at end has been edited to add more lines, with this flash, even the sbh 6120 noisy bootloader wont give serial, strange.. I'll try with the other flash I first used, and attempt posting nvram from the image you posted, and check the difference..

---

any good

You tell me lol..

[andy m]

vmng 300 never had a noisy bootloader a remember correctly