Seeking help for my sb5101

[raven1783]

So I was able to clone my modem for the purpose to pass it on to my nephew so that he may have some internet, my problem is that when I plug it in at his house it won't connect yet when I bring it back to my house it connects just fine. Can someone help me on resolving this issue please.

[southernyankey1970]

Clone protection is enabled...Buy your nephew the cheapest service and save yourself a year's worth of reading and frustration.

[newname]

if you unplug yours at your house, will your nephew's work at his house?

[Box3r]

maybe his line is disconnected from the main box ? does the modem LOCK on the frequencys ?

[raven1783]

maybe his line is disconnected from the main box ? does the modem LOCK on the frequencys ?

It is connected to the main box outside, all the lights on the modem light up -power-receive-send-online-pc/activitity blinks as it should. but when i open up the browser i get no connection to any webpage and when i try to go to the 192.168.100.1 it wont let me in.

[southernyankey1970]

Backup your clone. Upgrade Haxorware to Hax diag and reboot the modem. Disable updates and force network access.

Run a telnet boot log and post it here. Diag will tell you what sec feature is stopping you at your nephew's house most likely....

[raven1783]

Alright I'll have to go to his house tomorrow and then I'll post it here. Will the event log from from the hax. Web pag show the same info u might be needing? That way if so I can pug it into his home and then just bring it back to my house get the info and post it on here.

[sixteen]

Alright I'll have to go to his house tomorrow and then I'll post it here. Will the event log from from the hax. Web pag show the same info u might be needing? That way if so I can pug it into his home and then just bring it back to my house get the info and post it on here.

Event log is a wast of time just do what he stated.

[southernyankey1970]

Event log is absolutely worthless. Diagnostic firmware is only useful through the telnet interface. You can see the entire registration process and learn how it works. This is the only way to truly understand this hobby. Point and click is not learning. It is a simple process to get a bootlog.

lots of threads on it. Google it or go to SBH and get a membership where all the info is laid out in a simple to understand format.

[raven1783]

Backup your clone. Upgrade Haxorware to Hax diag and reboot the modem. Disable updates and force network access.

Run a telnet boot log and post it here. Diag will tell you what sec feature is stopping you at your nephew's house most likely....

sorry it took me long was out of town but did the log at his place and one at my place. I can post mine afterwards if you want. but here is the log from his place.



=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.11.17 18:31:05 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon

Username: root
Password: *****
Welcome.

CM>
CM> run
CM>
CM> run_app


Running the system...


Beginning Cable Modem operation...

0x00026e12 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Favorite[0].freq = 573000000
Attempting Downstream FEC lock @ freq= 573000000 Hz, QAM64/256

CM> Found energy at frequency 573000000Hz! Publishing event kEventEnergyDetected...
0x00027060 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 573000000 Hz
Carrier Offset = -4 Hz
Symbol rate = 5360537 sym/sec
SNR = 34 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x17a4feb8
Power Level = -11 dB
QAM = LOCKED
FEC = LOCKED
******************************************


CM> Calculating maximum number of IP filters:
Each IP filter consumes 1840 bytes of RAM.
Current free RAM is 432724 bytes.
Max heap reserved for IP filters (25%) = 108181
We can support 58 IP filters.
Calculating maximum number of LLC filters:
Each LLC filter consumes 724 bytes of RAM.
Current free RAM is 432724 bytes.
Max heap reserved for LLC filters (25%) = 108181
We can support 149 LLC filters.
Selecting UCD for Us Channel 1

0x00027aa6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x00027d3a [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x00027d3a [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 53.0 dBmV
0x00027d44 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.

CM>
RNG-RSP Adj: tim=2422 power=1 freq=0 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=329 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=-144 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 1
Upstream Frequency = 19400000 Hz
Upstream Power = 53 dBmV
Ranging SID = 0xa7c
Upstream Symbol Rate = 2560000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc: Waiting 3 seconds before sending Discover; client id htype=1, value=00:11:1a:df:4d:24
Not logging event ID 2307948624, control for level 7 is 0.

CM> DHCPc: Sending Discover packet; client id htype=1, value=00:11:1a:df:4d:24
DHCPc: Received an Offer from DHCP server 00:01:5c:47:4e:41 (142.254.136.89); lease client id htype=1, value=00:11:1a:df:4d:24

CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:11:1a:df:4d:24
DHCPc: Sending Request packet; client id htype=1, value=00:11:1a:df:4d:24
DHCPc: Received an Ack from DHCP server 00:01:5c:47:4e:41 (142.254.136.89); lease client id htype=1, value=00:11:1a:df:4d:24
Current IP address is default 0.0.0.0.
0x00029ef0 [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.242.206.243 (primary IP address)
Subnet Mask = 255.255.224.0
Router = 10.242.192.1
IsPrimaryInterface = 1

Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP = 10.242.192.1
MAC = 00:01:5c:47:4e:41
DHCP completed successfully!

DHCP Settings:
Client Id = htype=1, value=00:11:1a:df:4d:24
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x643fbdd7
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:01:5c:47:4e:41
Ignore NAKs = 0
My offered IP address = 10.242.206.243 (primary IP address)
(1) Subnet Mask = 255.255.224.0
(3) Router IP address = 10.242.192.1
(54) DHCP Server IP address = 142.254.136.89
(82) Relay Agent IP address = 142.254.136.89
TFTP Server IP address = 72.183.77.17
CM Configuration file = '?BEWGlxcAERrfTSQK8s7z@CvLO8+z7iqzD41mgJAgbG0FgsTJ0pF4t'
(2) UTC Time Offset = -21600 seconds
(4) Time Server IP address = 72.183.77.17
(6) Domain Name Server = 209.18.47.61; 209.18.47.62
(7) Log Server IP address =
(51) Lease time = 390586 seconds
(58) T1 (renew) = 195293 seconds
(59) T2 (rebind) = 341762 seconds
Lease is infinite = 0


SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.242.206.243, Subnet=255.255.224.0, Gateway=10.242.192.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.242.206.243
Starting Time Of Day...
0x00029fa4 [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 72.183.77.17
Connecting to ToD server 72.183.77.17...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.242.206.243:225
Not logging event ID 2291949724, control for level 7 is 0.

CM> UTC returned by ToD server 3625259508; UTC offset -21600
Current system time -> Mon Nov 17 18:31:48 2014

System start time -> Mon Nov 17 18:28:56 2014

Starting Tftp of configuration file...
Opening file '?BEWGlxcAERrfTSQK8s7z@CvLO8+z7iqzD41mgJAgbG0FgsTJ0pF4t' on 72.183.77.17 for reading...
tftp-enforce bypass is using 72.183.77.17:?BEWGlxcAERrfTSQK8s7z@CvLO8+z7iqzD41mgJAgbG0FgsTJ0pF4t
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass failed.Error Illegal operation

CM> Storing received cfg of size 3169 to memory
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 72.183.77.17
Server Port Number = 41406
Total Blocks Read = 7
Total Bytes Read = 3169

Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.16 -> 255.255.255.255
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.16 -> 255.255.255.255
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.16 -> Sh13ld3d
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.16 -> 3 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.16 -> HEX:40 00
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.16 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.18 -> 255.255.255.255
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.18 -> 255.255.255.255
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.18 -> yZaK4E8l
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.18 -> 2 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.18 -> HEX:40 00
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.18 -> 4 (i32)
TLV-11[13]: 1.3.6.1.2.1.69.1.2.1.2.19 -> 255.255.255.255
TLV-11[14]: 1.3.6.1.2.1.69.1.2.1.3.19 -> 255.255.255.255
TLV-11[15]: 1.3.6.1.2.1.69.1.2.1.4.19 -> oIuQEIHOjgFw22A
TLV-11[16]: 1.3.6.1.2.1.69.1.2.1.5.19 -> 2 (i32)
TLV-11[17]: 1.3.6.1.2.1.69.1.2.1.6.19 -> HEX:40 00
TLV-11[18]: 1.3.6.1.2.1.69.1.2.1.7.19 -> 4 (i32)
TLV-11[19]: 1.3.6.1.2.1.69.1.2.1.2.20 -> 255.255.255.255
TLV-11[20]: 1.3.6.1.2.1.69.1.2.1.3.20 -> 255.255.255.255
TLV-11[21]: 1.3.6.1.2.1.69.1.2.1.4.20 -> uDBFA7VBXhJ1dYA
TLV-11[22]: 1.3.6.1.2.1.69.1.2.1.5.20 -> 3 (i32)
TLV-11[23]: 1.3.6.1.2.1.69.1.2.1.6.20 -> HEX:40 00
TLV-11[24]: 1.3.6.1.2.1.69.1.2.1.7.20 -> 4 (i32)
TLV-11[25]: 1.3.6.1.2.1.69.1.6.1.0 -> 1 (i32)
TLV-11[26]: 1.3.6.1.2.1.69.1.6.2.1.2.20 -> 4 (i32)
TLV-11[27]: 1.3.6.1.2.1.69.1.6.2.1.3.20 -> 0 (i32)
TLV-11[28]: 1.3.6.1.2.1.69.1.6.2.1.4.20 -> 1 (i32)
TLV-11[29]: 1.3.6.1.2.1.69.1.6.2.1.5.20 -> 2048 (i32)
TLV-11[30]: 1.3.6.1.2.1.69.1.6.2.1.2.22 -> 4 (i32)
TLV-11[31]: 1.3.6.1.2.1.69.1.6.2.1.3.22 -> 0 (i32)
TLV-11[32]: 1.3.6.1.2.1.69.1.6.2.1.4.22 -> 1 (i32)
TLV-11[33]: 1.3.6.1.2.1.69.1.6.2.1.5.22 -> 2054 (i32)
TLV-11[34]: 1.3.6.1.2.1.69.1.6.3.0 -> 2 (i32)
TLV-11[35]: 1.3.6.1.2.1.69.1.6.4.1.2.80 -> 4 (i32)
TLV-11[36]: 1.3.6.1.2.1.69.1.6.4.1.4.80 -> 1 (i32)
TLV-11[37]: 1.3.6.1.2.1.69.1.6.4.1.5.80 -> 1 (i32)
TLV-11[38]: 1.3.6.1.2.1.69.1.6.4.1.9.80 -> 10.0.0.0
TLV-11[39]: 1.3.6.1.2.1.69.1.6.4.1.10.80 -> 255.0.0.0
TLV-11[40]: 1.3.6.1.2.1.69.1.6.4.1.2.64 -> 4 (i32)
TLV-11[41]: 1.3.6.1.2.1.69.1.6.4.1.4.64 -> 2 (i32)
TLV-11[42]: 1.3.6.1.2.1.69.1.6.4.1.5.64 -> 1 (i32)
TLV-11[43]: 1.3.6.1.2.1.69.1.6.4.1.11.64 -> 17 (i32)
TLV-11[44]: 1.3.6.1.2.1.69.1.6.4.1.12.64 -> 68 (i32)
TLV-11[45]: 1.3.6.1.2.1.69.1.6.4.1.13.64 -> 68 (i32)
TLV-11[46]: 1.3.6.1.2.1.69.1.6.4.1.14.64 -> 67 (i32)
TLV-11[47]: 1.3.6.1.2.1.69.1.6.4.1.15.64 -> 67 (i32)
TLV-11[48]: 1.3.6.1.2.1.69.1.6.4.1.2.66 -> 4 (i32)
TLV-11[49]: 1.3.6.1.2.1.69.1.6.4.1.4.66 -> 1 (i32)
TLV-11[50]: 1.3.6.1.2.1.69.1.6.4.1.5.66 -> 1 (i32)
TLV-11[51]: 1.3.6.1.2.1.69.1.6.4.1.11.66 -> 17 (i32)
TLV-11[52]: 1.3.6.1.2.1.69.1.6.4.1.12.66 -> 67 (i32)
TLV-11[53]: 1.3.6.1.2.1.69.1.6.4.1.13.66 -> 67 (i32)
TLV-11[54]: 1.3.6.1.2.1.69.1.6.4.1.14.66 -> 68 (i32)
TLV-11[55]: 1.3.6.1.2.1.69.1.6.4.1.15.66 -> 68 (i32)
TLV-11[56]: 1.3.6.1.2.1.69.1.6.4.1.2.68 -> 4 (i32)
TLV-11[57]: 1.3.6.1.2.1.69.1.6.4.1.3.68 -> 2 (i32)
TLV-11[58]: 1.3.6.1.2.1.69.1.6.4.1.4.68 -> 0 (i32)
TLV-11[59]: 1.3.6.1.2.1.69.1.6.4.1.5.68 -> 3 (i32)
TLV-11[60]: 1.3.6.1.2.1.69.1.6.4.1.11.68 -> 17 (i32)
TLV-11[61]: 1.3.6.1.2.1.69.1.6.4.1.12.68 -> 67 (i32)
TLV-11[62]: 1.3.6.1.2.1.69.1.6.4.1.13.68 -> 68 (i32)
TLV-11[63]: 1.3.6.1.2.1.69.1.6.4.1.14.68 -> 67 (i32)
TLV-11[64]: 1.3.6.1.2.1.69.1.6.4.1.15.68 -> 68 (i32)
TLV-11[65]: 1.3.6.1.2.1.69.1.6.4.1.2.172 -> 4 (i32)
TLV-11[66]: 1.3.6.1.2.1.69.1.6.4.1.4.172 -> 2 (i32)
TLV-11[67]: 1.3.6.1.2.1.69.1.6.4.1.5.172 -> 2 (i32)
TLV-11[68]: 1.3.6.1.2.1.69.1.6.4.1.9.172 -> 172.16.0.0
TLV-11[69]: 1.3.6.1.2.1.69.1.6.4.1.10.172 -> 255.240.0.0
TLV-11[70]: 1.3.6.1.2.1.69.1.6.4.1.2.680 -> 4 (i32)
TLV-11[71]: 1.3.6.1.2.1.69.1.6.4.1.3.680 -> 2 (i32)
TLV-11[72]: 1.3.6.1.2.1.69.1.6.4.1.4.680 -> 1 (i32)
TLV-11[73]: 1.3.6.1.2.1.69.1.6.4.1.5.680 -> 1 (i32)
TLV-11[74]: 1.3.6.1.2.1.69.1.6.4.1.9.680 -> 224.0.0.22
TLV-11[75]: 1.3.6.1.2.1.69.1.6.4.1.10.680 -> 255.255.255.255
TLV-11[76]: 1.3.6.1.2.1.69.1.6.4.1.11.680 -> 17 (i32)
TLV-11[77]: 1.3.6.1.2.1.69.1.6.4.1.2.681 -> 4 (i32)
TLV-11[78]: 1.3.6.1.2.1.69.1.6.4.1.4.681 -> 0 (i32)
TLV-11[79]: 1.3.6.1.2.1.69.1.6.4.1.5.681 -> 1 (i32)
TLV-11[80]: 1.3.6.1.2.1.69.1.6.4.1.9.681 -> 232.10.10.0
TLV-11[81]: 1.3.6.1.2.1.69.1.6.4.1.10.681 -> 255.255.254.0
TLV-11[82]: 1.3.6.1.2.1.69.1.6.4.1.2.683 -> 4 (i32)
TLV-11[83]: 1.3.6.1.2.1.69.1.6.4.1.3.683 -> 2 (i32)
TLV-11[84]: 1.3.6.1.2.1.69.1.6.4.1.4.683 -> 1 (i32)
TLV-11[85]: 1.3.6.1.2.1.69.1.6.4.1.5.683 -> 1 (i32)
TLV-11[86]: 1.3.6.1.2.1.69.1.6.4.1.9.683 -> 224.0.0.9
TLV-11[87]: 1.3.6.1.2.1.69.1.6.4.1.10.683 -> 255.255.255.255
TLV-11[88]: 1.3.6.1.2.1.69.1.6.4.1.11.683 -> 17 (i32)
TLV-11[89]: 1.3.6.1.2.1.69.1.6.4.1.2.684 -> 4 (i32)
TLV-11[90]: 1.3.6.1.2.1.69.1.6.4.1.4.684 -> 1 (i32)
TLV-11[91]: 1.3.6.1.2.1.69.1.6.4.1.5.684 -> 1 (i32)
TLV-11[92]: 1.3.6.1.2.1.69.1.6.4.1.9.684 -> 224.0.0.0
TLV-11[93]: 1.3.6.1.2.1.69.1.6.4.1.10.684 -> 240.0.0.0
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.242.206.243:225
93 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x0002ab02 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
Registration complete!
Process CVC
CmDownloadMatchBuffer - failed on comparison of strings
srcbuf= cmpbuf=S i=0
0x0002ab20 [CmDocsisCtlThread] CmSecureDownload::CmCodeVerificationCertificate:arseAndValidate: (Secure Software Download) ERROR - Failed to match digests.
Calculated SHA digest=
53 4d e7 84 4c 16 a7 0f f3 c8 51 24 56 a8 be 13
3e 39 a5 b4
RSA decrypted digest=
00 80 01 09 58 00 00 00 00 00 00 00 00 00 00 00
00 30 82 00
0x0002ab2a [CmDocsisCtlThread] CmSecureDownload:rocessConfigFileSpecifiedCvc: (Secure Software Download) ERROR - Config file co-signer CVC is rejected.
0x0002ab2a [CmDocsisCtlThread] CmSecureDownload:rocessConfigFileManufAndCosignerCvcs: (Secure Software Download) ERROR - Reject config file MSO CVC!
0x0002ab34 [CmDocsisCtlThread] BcmCmDocsisCtlThread:rocessCVC: (CmDocsisCtlThread) ERROR - Config file does not include a valid CVC!
DOCSIS CoS/QoS rate shaping enable is now 1
CmSnmpAgent::CmOperationalEvent for SB5102 CM Agent w/ BRCM Factory Support
CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
SB5102 CM Agent w/ BRCM Factory Support enabling management.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
0x0002ab34 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM enabled. starting BPKM key requests.
Logging event: Configuration File CVC Validation Failure
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
Not logging event ID 66040100, control for level 7 is 0.

CM> BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
Suspending SNMP Thread
0x0002ad00 [CmDocsisCtlThread] BcmVendorCmApplication::StopDhcpServer: (VendorExtension CmApp) Shutting down DHCP Server...
0x0002ad00 [CmDocsisCtlThread] BcmStandbySwitchThread::CmIsOperational: (Motorola Standby Switch Thread) Simulating a press of the standby switch to get the state configured properly.
0x0002ad0a [IGMP Thread] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
0x0002ad0a [Motorola Standby Switch Thread] BcmStandbySwitchThread::ThreadMain: (Motorola Standby Switch Thread) Standby switch was pressed!
0x0002ad0a [Motorola Standby Switch Thread] BcmStandbySwitchThread:rocessSwitchEvent: (Motorola Standby Switch Thread) Standby switch disabled in nonvol; ignoring event.
Not logging event ID 2296948624, control for level 7 is 0.

CM> 0x00036b8c [CmDocsisCtlThread] BcmCmDocsisCtlThread::T4NoStationMaintEvent: (CmDocsisCtlThread) ERROR - no Station Maint map op -> restart error
0x00036b8c [CmDocsisCtlThread] BcmCmDocsisCtlThread::T4NoStationMaintEvent: (CmDocsisCtlThread) WARNING - Non-vol override in effect. Ignoring timer event.
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 timeout

CM> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Not logging event ID 66060100, control for level 7 is 0.
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Not logging event ID 66060100, control for level 7 is 0.
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
0x000443fe [CmBpiManagerThd] CmBpiManagerThd::SaMapStateMgr: (CmBpiManagerThd) ERROR - Could not find the SA MAP FSM corresponding to specified IP Multicast Address - ignoring.
Logging event: Map Request Retry Timeout

CM> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
0x000457e0 [CmBpiManagerThd] CmBpiManagerThd::SaMapStateMgr: (CmBpiManagerThd) ERROR - Could not find the SA MAP FSM corresponding to specified IP Multicast Address - ignoring.
Logging event: Map Request Retry Timeout

CM> Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0
Bandwidth request failure! Status = 0