how to get certs and load them to a haxorware webstar 2100

[moneymart]

I already have a haxorware webstar modem with certs loaded
And it was working, but now it has limited connectivity but
Sometimes it connects but has slow DL/UL or disconnects
What is the problem or how can I get more certs, is there a
Tut. For what I'm asking, haven't been in the game since 2000
When I use to uncap my sharkfin. So I have some knowledge
I just don't know that much about the new bpi/bpi+ security.
I am in the south bay area Cali. Torrance, Hawthorne, area.
Socal.RR.com please help. Thanks in advance.

[drewmerc]

dump them from a working modem

[moneymart]

dump them from a working modem

dumb querstion I know but how do I dump them from a working modem? jtag? or is there a software based method like fastcerts? how do I get a
ton of certs & macs so that I will always be able to stay connected?

---

ps I also have a working paid modem up and running but it is an arris tg862 so its docsis 3.0 I believe is there a way to convert it or use it on my webstar dpc2100? thanks in advance

[ricktendo]

dpc2100 is very simple with IP Full View or with net snmp

Code:

:: This will set it to Factory Mode
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1 s password
:: This will confirm that is in Factory Mode
snmpget -v2c -c public 192.168.100.1 1.3.6.1.2.1.1.1.0
:: This will help you get the OID for bpi
snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.3
:: Use the LAST number you get from the previous command ans place in place of "X" (example "5")
snmpget -Ov -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.8.X > bpikey.txt
:: This should disable Factory Mode but it does not, you will have to power cycle your modem or use the Reset button
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.1.1.0 i 1

Some useful links
http://www.auditoriaswireless.net/index....pic=1696.0

http://www.auditoriaswireless.net/index....pic=1696.0

[moneymart]

dpc2100 is very simple with IP Full View or with net snmp

Code:

:: This will set it to Factory Mode
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1 s password
:: This will confirm that is in Factory Mode
snmpget -v2c -c public 192.168.100.1 1.3.6.1.2.1.1.1.0
:: This will help you get the OID for bpi
snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.3
:: Use the LAST number you get from the previous command ans place in place of "X" (example "5")
snmpget -Ov -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.8.X > bpikey.txt
:: This should disable Factory Mode but it does not, you will have to power cycle your modem or use the Reset button
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.1.1.0 i 1

Some useful links
http://www.auditoriaswireless.net/index....pic=1696.0

http://www.auditoriaswireless.net/index....pic=1696.0

Thanks ricktendo, my family is from costar Rica. But I WS wondering if it is possible to extract certs & Mac from an arris tg862 which is docsis 3.0 and convert and upload to my webstar 2100? Also i need a tutorial on how to load the mac & certs if needed in a specific order and what the settings are for Mac & certs on haxoware rev.39, please thank for all the help guys.

[ricktendo]

That is a docsis 3, I doubt it

[moneymart]

That is a docsis 3, I doubt it

OK then how do I find out what docsis it uses, or how do I extract Mac & certs from the Arri's 862?

[dragonlord7791]

you need jtagnt then you will be able to read the flash and extract the cert

[moneymart]

you need jtagnt then you will be able to read the flash and extract the cert

thank you, also i have been trying to use fastcert but when it finishes scanning, it doesn't produce a .txt file or anything? what am I doing wrong please help.

[dragonlord7791]

fast cert may bloked..
need to chek few thing s
1 the right stringt
2 the right range
3 the right port to scan usually 161 or 162