Can't access 192.168.100.1?

[legendarygizmo]

Hi guys, I been at this for hours trying to figure out what happened. The last thing i remember was changing the Macs on the Haxorware page and then I can't access the main page anymore. I tried rebooting it several times, tried it with and without the coax cable connected, tried static ip with:

192.168.100.10
255.255.255.0
192.168.100.1

and tried it on automatically obtain ip, and tried changing my NIC Mac, and it still won't let me get to the main page (192.168.100.1). I tried it with Firefox, IE, and tried pinging it and it all timeouts.

When I set it on automatically obtain ip, it gives me:

192.168.100.11
255.255.255.0
192.168.100.1

and it still won't let me enter the haxorware page (192.168.100.1)

My modem is a SB5101 with haxorware 1.1 rev39.

With the coax cable off, the power light is solid and the receive light is blinking. With the network cable plugged in, everything is the same except the PC/Activity light blinks and stays solid randomly also.

With the coax cable in, the power light is solid, receive light is solid, send light is solid, and online light is blinking. With the network cable plugged in, everything is the same except the PC/Activity light links and stays solid randomly also.

I tried every possible scenario I can think of trying to access the main haxorware 192.168.100.1 page.

Hope someone can help me resolve this problem. Thanks.

[drewmerc]

try telnet if it still fails reflash

[miniyao]

I did the same thing and got the same problem can not connect to 192.168.100.1 anymore. Help please anyone. Thank you.

[drewmerc]

try telnet if it still fails reflash

answer is the same

[miniyao]

Can you provide the telnet & reflash instruction. Thanks.

[drewmerc]

both are in the haxorware archive

[freeworld]

take white cable out ov back and take power out when power lighte comes back on receive lights starts flashing put in 192.168.100.1 will enter haxorware then do what ever needs to be done re-enter white cable re-set modem all done