My modem was working pretty good for the past few weeks, great speeds, great connection too. I have a SB5101 with haxor 1.1 rev 39. using bpi + bypass. Now for some reason i keep on getting the T4 error, whic is: Received Response to Broadcasr Maintenance Request, But no Unicast o. idk wats goin on, Some friends told me Comcast might be updating, but its been like a week already... like i said my signals are great, idk whats goin on if anyone can plz help me. ( ive tried other MACS and i get the same problem) btw i live in Miami, FL.
Well, the modems status is: Operational. This is my log. Received Response to Broadcasr Maintenance Request, But no Unicast Maintenance o REG-RSP invalid format or not recognized Ethernet link up - ready to pass packets thats what i get when modem starts, usually stays on REG-RSP invalid format with working internet, but now idk why im getting the T4 error....
Well,, This is what the Error im getting means, if anyone know what to do when you get the T4 error please let me know how to fix it.. ive tried everything :S
***T4 ( Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received )***
Explanation: The cable modem did not received a station maintenance opportunity in which to transmit a Ranging Request (RNG-REQ) message within the T4 timeout period (30 to 35 seconds). The cable modem is resetting its cable interface and restarting the registration process. Typically, this indicates an occasional, temporary loss of service, but if the problem persists, check for possible service outages or maintenance activity on this particular headend system. This error message is DOCSIS event message is R04.0, Ranging Request. i keep geting this for weeks what can i dooo :o
(02-02-2010, 10:20 AM)drewmerc Wrote: enable telnet/login and leave it running in the background this way you will log what is happening while it's doing this post the log
You mean the telnet on the haxorware? i always have it running...
(02-02-2010, 10:20 AM)drewmerc Wrote: enable telnet/login and leave it running in the background this way you will log what is happening while it's doing this post the log
You mean the telnet on the haxorware? i always have it running...
wow its alot of numbers , and i canp copy n paste, im on my ps3.. but at the end it says Suspending SNMPthread. CM> Bandwith request failure! Status = 0
![[Image: 713597747.png]](http://www.speedtest.net/result/713597747.png)
![[Image: 10186906.png]](http://www.pingtest.net/result/10186906.png)
