Haxorware Forums › General › Modems v
Paging Mr. DrewMerc - Please help on telnet log

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
Paging Mr. DrewMerc - Please help on telnet log
geoneo111 Offline
Haxorware Expert
*****
Posts: 303
Threads: 96
Joined: Apr 2012
Reputation: 3
#1
29-11-2012, 05:52 PM
The power light is flashing. Using BPI+ enabled docsis 1.1. I see this line: "Network access is disabled by provisioning; no traffic will be forwarded."

Can you please guide me in getting this working?


******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 18
Upstream Frequency = 23800000 Hz
Upstream Power = 48 dBmV
Ranging SID = 0x8e4
Upstream Symbol Rate = 5120000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc: Waiting 4 seconds before sending Discover; client id htype=1, value=00:1
6:cf:4d:a9:53
Logging event: T500.0 Acquired Upstream .......... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:6162, cmty="public"
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:XX:XX:XX:XX:XX
DHCPc: Received an Offer from DHCP server 00:01:5c:46Big Grin2:41 (10.70.128.1); leas
e client id htype=1, value=00:XX:XX:XX:XX:XX
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value
=00:XX:XX:XX:XX:XX
DHCPc: Sending Request packet; client id htype=1, value=00:XX:XX:XX:XX:XX
DHCPc: Received an Ack from DHCP server 00:01:5c:46Big Grin2:41 (10.70.128.1); lease
client id htype=1, value=00:XX:XX:XX:XX:XX
Current IP address is default 169.0.0.1; removing existing route...
0x000043ee ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::ConfigureLeaseImpl
: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.54.119.248
Subnet Mask = 255.255.224.0
Router = 10.54.96.1

DHCP completed successfully!

DHCP Settings:
Client Id = htype=1, value=00:XX:XX:XX:XX:XX
State = Bound (4)
Static Lease = false
AutoConfig Mode = IP, Subnet and Router
XID = 0x426f
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:01:5c:46Big Grin2:41
My offered IP address = 10.54.119.248
(1) Subnet Mask = 255.255.224.0
(3) Router IP address = 10.54.96.1
(54) DHCP Server IP address = 24.29.137.56
(82) Relay Agent IP address = 10.70.128.1
TFTP Server IP address = 24.29.158.10
CM Configuration file = '?BBgdiTgAFs9NqVMKNnf4@CjZ3+PAOk78JBD74qQa86TwK
ZPsYfQLV'
(2) UTC Time Offset = -18000 seconds
(4) Time Server IP address = 24.29.158.10
(7) Log Server IP address = 24.29.99.57
(51) Lease time = 2525 seconds
(58) T1 (renew) = 1262 seconds
(59) T2 (rebind) = 2209 seconds
Lease is infinite = false


CmSnmpAgent::IpAddressAcquiredEvent for SB5100 CM Agent
IP addr = 10.54.119.248
SB5100 CM Agent ConfigIp: Ip=10.54.119.248, Subnet=255.255.224.0, Gateway=10.54.
96.1
CM> Starting Time Of Day...
0x000047e0 ['CmDocsisIpThread' id=0x807c3b50] BcmDocsisTimeOfDayThread::SetTodSe
rverIpAddress: (Time Of Day Thread) ToD servers: 24.29.158.10
Connecting to ToD server 24.29.158.10...
Sending UDP ToD request to server...
Logging event: DHCP WARNING - Non-critical field invalid in response.
Logging event: D511.0 Retrieved DHCP .......... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:6162, cmty="public"
CM> UTC returned by ToD server 3561052827; UTC offset -18000
Current system time -> SUN NOV 04 16:20:27 2012

System start time -> SUN NOV 04 16:20:10 2012

Starting Tftp of configuration file...
Opening file '?BBgdiTgAFs9NqVMKNnf4@CjZ3+PAOk78JBD74qQa86TwKZPsYfQLV' on 24.29.1
58.10...
tftpInit: Tftp outbound interface flag (1024)
Connected to 24.29.158.10 [69]
mode set to octet.
getting from 24.29.158.10:?BBgdiTgAFs9NqVMKNnf4@CjZ3+PAOk78JBD74qQa86TwKZPsYfQLV
[octet]
tftpSend: Attempt #(1) Backoff (2) tickCount (1873) blkReply (1)
Set 1.3.6.1.2.1.69.1.6.4.1.15.446 to 445 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.593 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.4.593 to 2 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.593 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.593 to 6 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.593 to 593 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.593 to 593 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.64 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.4.64 to 2 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.64 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.64 to 17 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.12.64 to 68 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.13.64 to 68 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.64 to 67 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.64 to 67 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.66 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.4.66 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.66 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.66 to 17 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.12.66 to 67 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.13.66 to 67 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.66 to 68 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.66 to 68 OK.
80 TLV-11's OK.
MAX CPE per CM is being set to 2
Sending a REG-REQ to the CMTS...
Time Of Day completed...
BcmSnmpAgent::SystemTimeChangeEvent for SB5100 CM Agent
* SB5100MoD Save cmConfig ?BBgdiTgAFs9NqVMKNnf4@CjZ3+PAOk78JBD74qQa86TwKZPsYfQ
LV (2836 bytes) to RAM Memory
Tftp read ZERO bytes, may have reached end of file.
Config file was read! IP Initialization completed...
Set 1.3.6.1.2.1.69.1.2.1.2.16 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.16 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.16 to XX_XXXXXX_XXX_XXXXXX OK.
Set 1.3.6.1.2.1.69.1.2.1.5.16 to 3 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.16 to 40 00 OK.
Set 1.3.6.1.2.1.69.1.2.1.7.16 to 4 OK.
Set 1.3.6.1.2.1.69.1.2.1.2.18 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.18 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.18 to yZaK4E8l OK.
Set 1.3.6.1.2.1.69.1.2.1.5.18 to 2 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.18 to 40 00 OK.
Set 1.3.6.1.2.1.69.1.2.1.7.18 to 4 OK.
Set 1.3.6.1.2.1.69.1.2.1.2.19 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.19 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.19 to /J27Dna4O/8nO09 OK.
Set 1.3.6.1.2.1.69.1.2.1.5.19 to 2 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.19 to 40 00 OK.
Set 1.3.6.1.2.1.69.1.2.1.7.19 to 4 OK.
Set 1.3.6.1.2.1.69.1.2.1.2.20 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.20 to 255.255.255.255 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.20 to h7Wbul9gLrE6VoH OK.
Set 1.3.6.1.2.1.69.1.2.1.5.20 to 3 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.20 to 40 00 OK.
Set 1.3.6.1.2.1.69.1.2.1.7.20 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.1.0 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.2.1.2.20 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.2.1.3.20 to 0 OK.
Set 1.3.6.1.2.1.69.1.6.2.1.4.20 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.2.1.5.20 to 2048 OK.
Set 1.3.6.1.2.1.69.1.6.2.1.2.22 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.2.1.3.22 to 0 OK.
Set 1.3.6.1.2.1.69.1.6.2.1.4.22 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.2.1.5.22 to 2054 OK.
Set 1.3.6.1.2.1.69.1.6.3.0 to 2 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.135 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.4.135 to 2 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.135 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.135 to 6 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.135 to 135 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.135 to 139 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.136 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.4.136 to 2 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.136 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.136 to 17 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.136 to 135 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.136 to 139 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.445 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.4.445 to 2 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.445 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.445 to 6 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.445 to 445 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.445 to 445 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.446 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.4.446 to 2 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.446 to 1 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.446 to 17 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.446 to 445 OK.
Received a REG-RSP message from the CMTS...
0x00004c2c ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::RegRspMsgEv
ent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
Registration complete!
Process CVC
Co-signer CVC verified
CVC's validated
DOCSIS CoS/QoS rate shaping enable is now true
CmSnmpAgent::CmOperationalEvent for SB5100 CM Agent
CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5100 CM Agent setting V1/V2 view to docsisNmAccessView
SB5100 CM Agent enabling management.
v1Trap: coldStartTrap 10.54.119.248->192.168.100.10:6162, cmty="public"
SB5100 CM Agent sending deferred traps...
Done w/ deferred traps.
v1Trap: linkUpTrap(if2) 192.168.100.1->192.168.100.10:6162, cmty="public"
v1Trap: linkUpTrap(if2) 10.54.119.248->192.168.100.10:6162, cmty="public"
SB5100 CPE Agent disabling management.
SB5100 CPE Agent defering traps.
SB5100 CPE Agent setting V1/V2 view to docsisNmAccessView
0x00004c86 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaun
chBpkm: (CmDocsisCtlThread) BPKM disabled via provisioned config file setting.
Network access is disabled by provisioning; no traffic will be forwarded.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
0x00004cea ['IGMP Thread' id=0x807b7580] BcmIgmpThread::Starting Igmp Thread...:
(IGMP Thread)
Logging event: D509.0 Retrieved TFTP Config ?BBgdiTgAFs9NqVMKNnf4@CjZ3+PAOk78JBD
74qQa86TwKZPsYfQLV SUCCESS
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898626> D509.0 Retrieved TFTP Co
nfig ?BBgdiTgAFs9NqVMKNnf4@CjZ3+PAOk78JBD74qQa86TwKZPsYfQLV SUCCESS
v1Trap: cmTrapLog 10.54.119.248->192.168.100.10:6162, cmty="public"
Logging event: D507.0 Retrieved Time....... SUCCESS
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898625> D507.0 Retrieved Time...
.... SUCCESS
v1Trap: cmTrapLog 10.54.119.248->192.168.100.10:6162, cmty="public"
SB5100 CM Event Log sending deferred async messages...
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898630> T501.0 Acquired Downstre
am (309000000 Hz)........ SUCCESS
v1Trap: cmTrapLog 10.54.119.248->192.168.100.10:6162, cmty="public"
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898629> T500.0 Acquired Upstream
.......... SUCCESS
v1Trap: cmTrapLog 10.54.119.248->192.168.100.10:6162, cmty="public"
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <68000300> DHCP WARNING - Non-critical field invali
d in response.
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898627> D511.0 Retrieved DHCP ..
........ SUCCESS
v1Trap: cmTrapLog 10.54.119.248->192.168.100.10:6162, cmty="public"
Done w/ deferred msgs
Logging event: I500.0 Registration Completed
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898628> I500.0 Registration Comp
leted
v1Trap: cmTrapLog 10.54.119.248->192.168.100.10:6162, cmty="public"
CM>
Find
Reply
southernyankey1970 Away
Retired!
*****
Posts: 1,483
Threads: 24
Joined: May 2010
Reputation: 65
#2
30-11-2012, 02:01 AM
looks exactly like a walledgarden cfg
Find
Reply
ABMJR Away
DOCSIS Genius
*****
Posts: 1,516
Threads: 16
Joined: Dec 2009
Reputation: 79
#3
30-11-2012, 02:47 AM
Power light is FLASHING? Repeat again?
Knowledge=Power
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#4
30-11-2012, 02:50 AM
5100 logs just look wrong to me, i can see what's wrong on a 5101 log just looking at the layout without reading
but 5100 log have a stupid order
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
geoneo111 Offline
Haxorware Expert
*****
Posts: 303
Threads: 96
Joined: Apr 2012
Reputation: 3
#5
30-11-2012, 02:51 AM
(30-11-2012, 02:01 AM)southernyankey1970 Wrote: looks exactly like a walledgarden cfg

Thanks for the reply. I appreciate it Southern Yankee. Southern Yankee? Oxymoron isn't it? Are you a Yankee that's more like a southerner or a Southerner that's more like a Yankee? Wink

Anyway, thanks again. I'll read up on what a walledgarden cfg is.
Find
Reply
geoneo111 Offline
Haxorware Expert
*****
Posts: 303
Threads: 96
Joined: Apr 2012
Reputation: 3
#6
30-11-2012, 04:33 PM (This post was last modified: 30-11-2012, 04:33 PM by geoneo111.)
(30-11-2012, 02:47 AM)ABMJR Wrote: Power light is FLASHING? Repeat again?

Blinking, flashing, not solid. You know what I mean, but I don't know what you're trying to say.
(30-11-2012, 02:50 AM)drewmerc Wrote: 5100 logs just look wrong to me, i can see what's wrong on a 5101 log just looking at the layout without reading
but 5100 log have a stupid order

Thanks for looking anyway.
Find
Reply
ABMJR Away
DOCSIS Genius
*****
Posts: 1,516
Threads: 16
Joined: Dec 2009
Reputation: 79
#7
30-11-2012, 04:47 PM
The power light, top led on the 5100,is blinking? Not solid?
Knowledge=Power
Find
Reply
geoneo111 Offline
Haxorware Expert
*****
Posts: 303
Threads: 96
Joined: Apr 2012
Reputation: 3
#8
30-11-2012, 05:43 PM
(30-11-2012, 04:47 PM)ABMJR Wrote: The power light, top led on the 5100,is blinking? Not solid?

Correct. The power light, first led on the 5100 is blinking, not steady/solid.
Find
Reply
southernyankey1970 Away
Retired!
*****
Posts: 1,483
Threads: 24
Joined: May 2010
Reputation: 65
#9
01-12-2012, 12:44 AM
THe last time i saw that on a 5100,CC was finishing out the D3 upgrades in my area. I believe that I had to ditch SBmod at that point...I'm pretty sure that was the case. It's tight here, I cannot use ANY flavor of Haxorware for more than an hour or so before the CMTS smacks it off the network. 5100's I can ONLY run stock firm with some telnet tweaks (NO, NOT Jr's magic trick!). I would say that your best move would be a fresh test setup with a new nic mac for starters...

Just for shits and giggles I would swap out the power supply on that 5100 just to make sure that is not the issue. They do die out eventually.
Find
Reply
ABMJR Away
DOCSIS Genius
*****
Posts: 1,516
Threads: 16
Joined: Dec 2009
Reputation: 79
#10
01-12-2012, 04:17 AM
I remember this problem...

Try and replace the power supply...

But I think it is the modem is trying to do a firmware upgrade...

Re-flash it
Knowledge=Power
Find
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)