05-08-2012, 10:10 PM
|
SB5101 can't get online..
|
23-10-2012, 07:02 AM
If you have haxorware 2.0 ,you can use for Queens NY
23-10-2012, 12:39 PM
23-10-2012, 02:04 PM
(23-10-2012, 12:39 PM)depor1 Wrote:(23-10-2012, 07:02 AM)usajinshan Wrote: If you have haxorware 2.0 ,you can use for Queens NY Am not from your country but base on all the info am reading, you will need more than just a config.
26-10-2012, 07:25 AM
(30-03-2011, 02:16 AM)antonlavey3666 Wrote:(30-03-2011, 01:35 AM)ABMJR Wrote: D003.0 DHCP WARNING - Non-critical field invalid in response 
26-10-2012, 09:56 AM
This says it all...
Quote:2011-03-27 14:01:57 Error B301.8 Auth Reject - Permanent Authorization Failure
Knowledge=Power
26-10-2012, 08:17 PM
2011-03-27 13:52:45 Error B301.8 Auth Reject - Permanent Authorization Failure
This spells DOOM!. Stop swappin macs as they are now useless for you. You now need the whole enchilada...
26-10-2012, 10:57 PM
here is, mohitomish show us in detail how to get telnet.txt:
http://www.haxorware.com/forums/thread-1888.html Set manual NIC IP 192.168.100.10. Open Putty. Click the 'session' section of the settings panel: Connection type: Telnet Host Name: 192.168.100.1 Port: 23 Close window on exit: Never Power up the modem. Wait 15 seconds, then click 'open' in putty. Enter username and password, press enter. Ignore any crap coming up in the window, it may look like you can't type but you can. May help if you just don't look at the screen Type this, pressing enter at the end of each line: cd doc up_dis cd / cd n/b auto_console 1 write Note: The lines above are correct for modems based on the BCM3349 (A250/A255/A256/SB5101/Webstar 2100). If you're using a BCM3348 modem (A200/SB5100) the line 'cd n/b' changes to 'cd n/c'. This tells the modem to halt at the console. Close putty and reboot modem using power cable. When you reboot it, it won't try to connect at first, so you have time to set putty to log all console output to txt before connecting. Open Putty. Click the logging section of the settings panel. Select the following options: Session logging: All session output Click 'browse' and browse to your desktop folder. Filename: putty.txt 'Always overwrite it' Untick 'flush log file frequently' Click back onto the 'session' section of the settings panel: Connection type: Telnet Host Name: 192.168.100.1 Port: 23 Close window on exit: Never Click 'open', enter username and password and press enter. Type 'run' and press enter. The modem will try to connect. Wait for about 20s after the connection has reached the failure point, then close putty and it'll save the txt log as putty.txt on your desktop. Once you've finished you'll need to set auto_console back to 0 in telnet, or you'll have to type 'run' every time you reboot modem.
01-11-2012, 08:37 PM
Hi
I finally did all upgrades to haxo lite on my 5101 for NYC Bronx. I got a very good telnet log I hope. I uploaded certs and mac did everything in the book with telnet. I get connected fine but still hit the dreaded wallgarden of hell LOL What more am I missing here is the telnet log newest. Attempting Downstream FEC lock @ freq= 543000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 549000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 555000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 561000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 567000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 573000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 579000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 585000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 591000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 597000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 603000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 609000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 615000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 621000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 627000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 633000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 639000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 645000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 651000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 657000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 663000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 669000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 675000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 681000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 687000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 693000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 699000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 705000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 711000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 717000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 723000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 729000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 735000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 741000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 747000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 753000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 759000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 765000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 771000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 777000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 783000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 789000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 795000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 801000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 807000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 813000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 819000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 825000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 831000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 837000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 843000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 849000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 855000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 93000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 99000000 Hz, QAM64 Attempting Downstream FEC lock @ freq= 105000000 Hz, QAM64 Favorite[0].freq = 603000000 Attempting Downstream FEC lock @ freq= 603000000 Hz, QAM64/256 ****************************************** DOWNSTREAM STATUS ****************************************** Tuner Frequency = 603000000 Hz Carrier Offset = 8 Hz Symbol rate = 5360537 sym/sec SNR = 35 dB QAM Mode = QAM256 Tuner AGC = 0xfff00000 IF AGC = 0x1722cef9 Power Level = -6 dB QAM = LOCKED FEC = LOCKED ****************************************** CM> Selecting UCD for Us Channel 10 RNG-RSP Adj: tim=1643 power=-3 freq=0 Stat=Continue RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success ****************************************** UPSTREAM STATUS ****************************************** Upstream Status = UP Upstream Channel = 10 Upstream Frequency = 22500000 Hz Upstream Power = 51 dBmV Ranging SID = 0xb77 Upstream Symbol Rate = 5120000 sym/sec ****************************************** Starting IP Initialization with DHCP... CM> ARPing for default GW IP = 10.9.144.1 MAC = 00XXXXXXXXXXXX Can't post mac LOLLOL DHCP completed successfully! DHCP: IP address = 10.9.144.136 Starting Time Of Day... SNMP Agent Binding to 10.9.144.136:225 Current system time -> Thu Nov 01 01:47:45 2012 System start time -> Thu Nov 01 01:44:29 2012 Starting Tftp of configuration file... tftp-enforce bypass is DISABLED Storing received cfg of size 4116 to memory TLV-11[1]: 1.3.6.1.2.1.69.1.6.3.0 -> 2 (i32) TLV-11[2]: 1.3.6.1.2.1.69.1.6.4.1.2.505 -> 4 (i32) TLV-11[3]: 1.3.6.1.2.1.69.1.6.4.1.3.505 -> 2 (i32) TLV-11[4]: 1.3.6.1.2.1.69.1.6.4.1.4.505 -> 0 (i32) TLV-11[5]: 1.3.6.1.2.1.69.1.6.4.1.5.505 -> 3 (i32) TLV-11[6]: 1.3.6.1.2.1.69.1.6.4.1.6.505 -> 2 (i32) TLV-11[7]: 1.3.6.1.2.1.69.1.6.4.1.7.505 -> 0.0.0.0 TLV-11[8]: 1.3.6.1.2.1.69.1.6.4.1.8.505 -> 0.0.0.0 TLV-11[9]: 1.3.6.1.2.1.69.1.6.4.1.9.505 -> 167.206.112.0 TLV-11[10]: 1.3.6.1.2.1.69.1.6.4.1.10.505 -> 255.255.255.0 TLV-11[11]: 1.3.6.1.2.1.69.1.6.4.1.11.505 -> 6 (i32) TLV-11[12]: 1.3.6.1.2.1.69.1.6.4.1.14.505 -> 25 (i32) TLV-11[13]: 1.3.6.1.2.1.69.1.6.4.1.15.505 -> 25 (i32) TLV-11[14]: 1.3.6.1.2.1.69.1.6.4.1.2.506 -> 4 (i32) TLV-11[15]: 1.3.6.1.2.1.69.1.6.4.1.3.506 -> 2 (i32) TLV-11[16]: 1.3.6.1.2.1.69.1.6.4.1.4.506 -> 0 (i32) TLV-11[17]: 1.3.6.1.2.1.69.1.6.4.1.5.506 -> 3 (i32) TLV-11[18]: 1.3.6.1.2.1.69.1.6.4.1.6.506 -> 2 (i32) TLV-11[19]: 1.3.6.1.2.1.69.1.6.4.1.7.506 -> 0.0.0.0 TLV-11[20]: 1.3.6.1.2.1.69.1.6.4.1.8.506 -> 0.0.0.0 TLV-11[21]: 1.3.6.1.2.1.69.1.6.4.1.9.506 -> 167.206.5.0 TLV-11[22]: 1.3.6.1.2.1.69.1.6.4.1.10.506 -> 255.255.255.0 TLV-11[23]: 1.3.6.1.2.1.69.1.6.4.1.11.506 -> 6 (i32) TLV-11[24]: 1.3.6.1.2.1.69.1.6.4.1.14.506 -> 25 (i32) TLV-11[25]: 1.3.6.1.2.1.69.1.6.4.1.15.506 -> 25 (i32) TLV-11[26]: 1.3.6.1.2.1.69.1.6.4.1.2.507 -> 4 (i32) TLV-11[27]: 1.3.6.1.2.1.69.1.6.4.1.3.507 -> 1 (i32) TLV-11[28]: 1.3.6.1.2.1.69.1.6.4.1.4.507 -> 0 (i32) TLV-11[29]: 1.3.6.1.2.1.69.1.6.4.1.5.507 -> 3 (i32) TLV-11[30]: 1.3.6.1.2.1.69.1.6.4.1.6.507 -> 2 (i32) TLV-11[31]: 1.3.6.1.2.1.69.1.6.4.1.7.507 -> 0.0.0.0 TLV-11[32]: 1.3.6.1.2.1.69.1.6.4.1.8.507 -> 0.0.0.0 TLV-11[33]: 1.3.6.1.2.1.69.1.6.4.1.9.507 -> 0.0.0.0 TLV-11[34]: 1.3.6.1.2.1.69.1.6.4.1.10.507 -> 0.0.0.0 TLV-11[35]: 1.3.6.1.2.1.69.1.6.4.1.11.507 -> 6 (i32) TLV-11[36]: 1.3.6.1.2.1.69.1.6.4.1.14.507 -> 25 (i32) TLV-11[37]: 1.3.6.1.2.1.69.1.6.4.1.15.507 -> 25 (i32) TLV-11[38]: 1.3.6.1.2.1.69.1.6.4.1.2.508 -> 4 (i32) TLV-11[39]: 1.3.6.1.2.1.69.1.6.4.1.3.508 -> 1 (i32) TLV-11[40]: 1.3.6.1.2.1.69.1.6.4.1.4.508 -> 1 (i32) TLV-11[41]: 1.3.6.1.2.1.69.1.6.4.1.5.508 -> 1 (i32) TLV-11[42]: 1.3.6.1.2.1.69.1.6.4.1.6.508 -> 2 (i32) TLV-11[43]: 1.3.6.1.2.1.69.1.6.4.1.7.508 -> 0.0.0.0 TLV-11[44]: 1.3.6.1.2.1.69.1.6.4.1.8.508 -> 0.0.0.0 TLV-11[45]: 1.3.6.1.2.1.69.1.6.4.1.9.508 -> 0.0.0.0 TLV-11[46]: 1.3.6.1.2.1.69.1.6.4.1.10.508 -> 0.0.0.0 TLV-11[47]: 1.3.6.1.2.1.69.1.6.4.1.11.508 -> 6 (i32) TLV-11[48]: 1.3.6.1.2.1.69.1.6.4.1.12.508 -> 80 (i32) TLV-11[49]: 1.3.6.1.2.1.69.1.6.4.1.13.508 -> 80 (i32) TLV-11[50]: 1.3.6.1.2.1.69.1.6.4.1.2.510 -> 4 (i32) TLV-11[51]: 1.3.6.1.2.1.69.1.6.4.1.3.510 -> 1 (i32) TLV-11[52]: 1.3.6.1.2.1.69.1.6.4.1.4.510 -> 1 (i32) TLV-11[53]: 1.3.6.1.2.1.69.1.6.4.1.5.510 -> 1 (i32) TLV-11[54]: 1.3.6.1.2.1.69.1.6.4.1.6.510 -> 2 (i32) TLV-11[55]: 1.3.6.1.2.1.69.1.6.4.1.7.510 -> 0.0.0.0 TLV-11[56]: 1.3.6.1.2.1.69.1.6.4.1.8.510 -> 0.0.0.0 TLV-11[57]: 1.3.6.1.2.1.69.1.6.4.1.9.510 -> 0.0.0.0 TLV-11[58]: 1.3.6.1.2.1.69.1.6.4.1.10.510 -> 0.0.0.0 TLV-11[59]: 1.3.6.1.2.1.69.1.6.4.1.11.510 -> 6 (i32) TLV-11[60]: 1.3.6.1.2.1.69.1.6.4.1.12.510 -> 8080 (i32) TLV-11[61]: 1.3.6.1.2.1.69.1.6.4.1.13.510 -> 8080 (i32) TLV-11[62]: 1.3.6.1.2.1.69.1.6.4.1.2.511 -> 4 (i32) TLV-11[63]: 1.3.6.1.2.1.69.1.6.4.1.3.511 -> 1 (i32) TLV-11[64]: 1.3.6.1.2.1.69.1.6.4.1.4.511 -> 1 (i32) TLV-11[65]: 1.3.6.1.2.1.69.1.6.4.1.5.511 -> 1 (i32) TLV-11[66]: 1.3.6.1.2.1.69.1.6.4.1.6.511 -> 2 (i32) TLV-11[67]: 1.3.6.1.2.1.69.1.6.4.1.7.511 -> 0.0.0.0 TLV-11[68]: 1.3.6.1.2.1.69.1.6.4.1.8.511 -> 0.0.0.0 TLV-11[69]: 1.3.6.1.2.1.69.1.6.4.1.9.511 -> 0.0.0.0 TLV-11[70]: 1.3.6.1.2.1.69.1.6.4.1.10.511 -> 0.0.0.0 TLV-11[71]: 1.3.6.1.2.1.69.1.6.4.1.11.511 -> 6 (i32) TLV-11[72]: 1.3.6.1.2.1.69.1.6.4.1.12.511 -> 1080 (i32) TLV-11[73]: 1.3.6.1.2.1.69.1.6.4.1.13.511 -> 1080 (i32) TLV-11[74]: 1.3.6.1.2.1.69.1.6.4.1.2.512 -> 4 (i32) TLV-11[75]: 1.3.6.1.2.1.69.1.6.4.1.3.512 -> 1 (i32) TLV-11[76]: 1.3.6.1.2.1.69.1.6.4.1.4.512 -> 1 (i32) TLV-11[77]: 1.3.6.1.2.1.69.1.6.4.1.5.512 -> 1 (i32) TLV-11[78]: 1.3.6.1.2.1.69.1.6.4.1.6.512 -> 2 (i32) TLV-11[79]: 1.3.6.1.2.1.69.1.6.4.1.7.512 -> 0.0.0.0 TLV-11[80]: 1.3.6.1.2.1.69.1.6.4.1.8.512 -> 0.0.0.0 TLV-11[81]: 1.3.6.1.2.1.69.1.6.4.1.9.512 -> 0.0.0.0 TLV-11[82]: 1.3.6.1.2.1.69.1.6.4.1.10.512 -> 0.0.0.0 TLV-11[83]: 1.3.6.1.2.1.69.1.6.4.1.11.512 -> 6 (i32) TLV-11[84]: 1.3.6.1.2.1.69.1.6.4.1.12.512 -> 3128 (i32) TLV-11[85]: 1.3.6.1.2.1.69.1.6.4.1.13.512 -> 3128 (i32) TLV-11[86]: 1.3.6.1.2.1.69.1.6.4.1.2.513 -> 4 (i32) TLV-11[87]: 1.3.6.1.2.1.69.1.6.4.1.3.513 -> 1 (i32) TLV-11[88]: 1.3.6.1.2.1.69.1.6.4.1.4.513 -> 1 (i32) TLV-11[89]: 1.3.6.1.2.1.69.1.6.4.1.5.513 -> 1 (i32) TLV-11[90]: 1.3.6.1.2.1.69.1.6.4.1.6.513 -> 2 (i32) TLV-11[91]: 1.3.6.1.2.1.69.1.6.4.1.7.513 -> 0.0.0.0 TLV-11[92]: 1.3.6.1.2.1.69.1.6.4.1.8.513 -> 0.0.0.0 TLV-11[93]: 1.3.6.1.2.1.69.1.6.4.1.9.513 -> 0.0.0.0 TLV-11[94]: 1.3.6.1.2.1.69.1.6.4.1.10.513 -> 0.0.0.0 TLV-11[95]: 1.3.6.1.2.1.69.1.6.4.1.11.513 -> 6 (i32) TLV-11[96]: 1.3.6.1.2.1.69.1.6.4.1.12.513 -> 6588 (i32) TLV-11[97]: 1.3.6.1.2.1.69.1.6.4.1.13.513 -> 6588 (i32) TLV-11[98]: 1.3.6.1.2.1.69.1.6.4.1.2.509 -> 4 (i32) TLV-11[99]: 1.3.6.1.2.1.69.1.6.4.1.3.509 -> 1 (i32) TLV-11[100]: 1.3.6.1.2.1.69.1.6.4.1.4.509 -> 2 (i32) TLV-11[101]: 1.3.6.1.2.1.69.1.6.4.1.5.509 -> 3 (i32) TLV-11[102]: 1.3.6.1.2.1.69.1.6.4.1.6.509 -> 1 (i32) TLV-11[103]: 1.3.6.1.2.1.69.1.6.4.1.7.509 -> 0.0.0.0 TLV-11[104]: 1.3.6.1.2.1.69.1.6.4.1.8.509 -> 0.0.0.0 TLV-11[105]: 1.3.6.1.2.1.69.1.6.4.1.9.509 -> 224.0.0.0 TLV-11[106]: 1.3.6.1.2.1.69.1.6.4.1.10.509 -> 240.0.0.0 TLV-11[107]: 1.3.6.1.2.1.69.1.6.4.1.11.509 -> 256 (i32) Time Of Day completed... SB5101 CM Agent w/ BRCM Factory Support processing TLV-11's SNMP packet sent to 10.9.144.136:225 107 TLV-11's OK. Non-Vol BPI Settings successfully written to the device. BPI initialization completed. Calling ConfigOperational(). Enabling network access for all CPE ports. mot_scanList: Writing to Flash! BcmCmDocsisStatusEventCodes::kCmIsOperational |
|
« Next Oldest | Next Newest »
|
![[Image: 2067907098.png]](http://speedtest.net/result/2067907098.png)
Users browsing this thread: 11 Guest(s)