07-10-2012, 08:45 PM
Ok so here is a small tutorial. It works for me.
Software Needed.
VultureWare DOCSIS Config Editor
Notepad ++ with hex plugin or any Hex Editor.
1. Open Haxorware. 192.168.100.1
2. Download Config File.
Name is config.cfg
Open it with Config Editor.
Change Downstream Maximum Susteained Traffic Rate from 3072000 to 10240000
Prese Save. Save it as confignew.cfg
it will ask for a authentication scring just press no.
Open config.cfg with hex and also open confignew.cfg
go all the way to the bottom.
You will notice that the last two lines are different. Copy exactly what you see in the orginal config file.
Copy Lines.
1140
1150
1160
make sure you look at the other lines above and they match also.
Ok that is about it.
If anybody has a 20 30 or 50 mbps files let me know what the down stream speed is. They need to be exact or else they dont work.
Good Luck.
I just went from 3 to 10, The speed test is reporting 22.
Software Needed.
VultureWare DOCSIS Config Editor
Notepad ++ with hex plugin or any Hex Editor.
1. Open Haxorware. 192.168.100.1
2. Download Config File.
Name is config.cfg
Open it with Config Editor.
Change Downstream Maximum Susteained Traffic Rate from 3072000 to 10240000
Prese Save. Save it as confignew.cfg
it will ask for a authentication scring just press no.
Open config.cfg with hex and also open confignew.cfg
go all the way to the bottom.
You will notice that the last two lines are different. Copy exactly what you see in the orginal config file.
Copy Lines.
1140
1150
1160
make sure you look at the other lines above and they match also.
Ok that is about it.
If anybody has a 20 30 or 50 mbps files let me know what the down stream speed is. They need to be exact or else they dont work.
Good Luck.
I just went from 3 to 10, The speed test is reporting 22.