sb5101

[david6969]

ok i was working fine till i did something now i have lost all my internet can some one help
ok i have sb5101 and i noticed after i put a mac one i made
my config file is gone so were will i get my config file back what is supposed to be in there..

[drewmerc]

you did not back it up before changing random stuff?

[david6969]

you did not back it up before changing random stuff?

i have a sb5101 and it was working i would have a good mac adress and it would work great.now i have hoxware 1.1 39 and it was working fine then i changed a mac add to test macs and now the modem goes on line but the computer says page cant be displayed.I have notice the computer cant get a ip it always accureing ip and so it will never show me the my google page..Now to remind you i am on mediacom but what would they be able to put something in my modem right because it goes on line but cant get a ip address on the computer but i hook up the paid modem and gets a ip and everything...


now when i flashed modem for the fisrt time 8 months ago i used there config file that came with rev 39 and did not change anything but the mac address. should the modem have anything in the config fig tab does it show any thing..

i had a back of the modem 8 months ago but my computer crashed but now i have not done a back up with what was on there i did not change nothing but mac addy


Modem Status

--------------------------------------------------------------------------------

Information
Standard Specification Compliant DOCSIS 3.0
Hardware Version 1.04A
Software Version V5.5.3.mp1CPR08c
Cable MAC Address 20:
Device MAC Address 20:
Cable Modem Serial Number 2C1
CM certificate Installed


--------------------------------------------------------------------------------

Status
System Up Time 0 days 00h:35m:47s
Network Access Allowed
Cable Modem IP Address 10.

Network Configuration
WAN IP Address 173.17.
Duration D: 00 H: 01 M: 00 S: 00
Expires Tue Jun 26 21:58:46 2012
WAN Subnet Mask 255.255.255.0
WAN Default Gateway 173.
WAN Primary DNS 97.64
WAN Secondary DNS 97.64.168.13
WAN Third DNS 0.0.0.0


Connection

--------------------------------------------------------------------------------

Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 111000000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK bpr0106204e7f5baa880003
Security Disabled Disabled


--------------------------------------------------------------------------------

Downstream Bonded Channels
Lock Status Modulation Channel ID Symbol rate Frequency Power SNR DOCSIS/EuroDOCSIS locked
Locked QAM256 13 5360 Ksym/sec 111000000 Hz 3.9 dBmV 38.6 dB Docsis
Locked QAM256 14 5360 Ksym/sec 117000000 Hz 2.9 dBmV 38.0 dB Docsis
Locked QAM256 15 5360 Ksym/sec 123000000 Hz 2.1 dBmV 37.4 dB Docsis
Unlocked Unknown 0 0 sym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 sym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 sym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 sym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 sym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown


--------------------------------------------------------------------------------

Upstream Bonded Channels
Lock Status Modulation Channel ID Symbol rate Frequency Power
Locked ATDMA 4 5120 Ksym/sec 28000000 Hz 44.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV


--------------------------------------------------------------------------------

Current System Time:Tue Jun 26 21:19:53 2012




this is my paid modem info...

[drewmerc]

unplugg the coax and try and access the gui if still nothing reflash it

[david6969]

unplugg the coax and try and access the gui if still nothing reflash it

ok i was not taking the coax off i was just putting in macs lol so i need to unplug it and i was useing mcsniff on my node and i need to get to my sister and get other macs not on my same node right...