(25-07-2015, 08:19 AM)Ziricom Wrote: Starting Tftp of configuration file...
tftp-enforce bypass is DISABLED
I'm assuming your ISP is now enforcing that their TFTP Server be used to obtain config files, I see your TFTP Enforce Bypass is Disabled. Did you try enabling it?
If that does not work did you try Auto serving?
Ty for reply Ziricom, yes i have, tried the ENABLED option and I got an unknow error by my ISP; "Bypass failed.Error Unknown", on bottom is a part of the log for when is enabled.
This is how i see my config files names right now: " d;kfoA,.iyewrkldJKDHSUBsgvca69834ncxv9873254k;fg87d ".
And when i try to Auto serve my config file my CM reboots over and over, haxor log gives me: " Neg Or Bad Reg Rsp - Reinitialize MAC... "
and in this log im actually trying to "Force Config File" in haxorwere using my ISP Tftp server IP and the name of the Configs, btw i have tryed the new ones (the encrypted ones, dint work,,,, the Pre new security ones wich you might see on the log " ^1/E466C9AA/Inter.Resid.20Mbps/Moto/Common-Settings ", that was the config i was Auto serving for my internet speed.
As you might see on the log my CM is operational and i have internet BUT only at my base speed, wich is 12mbps, even when the modem log says is "forcing" the 20mbps config file, so what i mean is that my "stock" ISP config file is the one active and not the one im providing.
Any thoughts?
/////////////////telnet log////////////////////
Starting IP Initialization with DHCP...
CM> ARPing for default GW IP = 10.112.64.1
MAC = 50:57:a8:89:bc:d9
DHCP completed successfully!
DHCP: IP address = 10.112.81.46
Starting Time Of Day...
SNMP Agent Binding to 10.112.81.46:225
Current system time -> Sat Jul 25 03:48:54 2015
System start time -> Sat Jul 25 03:47:47 2015
Starting Tftp of configuration file...
tftp-enforce bypass is using 10.112.64.1:d;kfoA,.iyewrkldJKDHSUBsgvca69834ncxv9873254k;fg87d
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass failed.Error Unknown
Forcing Config File name to ^1/E466C9AA/Inter.Resid.20Mbps/Moto/Common-Settings
Storing received cfg of size 460 to memory
Motorola vendor ID
TLV-11[1]: 1.3.6.1.2.1.69.1.3.3.0 -> 2 (i32)
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.2.7 -> 10.0.0.0
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.3.7 -> 255.0.0.0
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.4.7 -> public
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.5.7 -> 2 (i32)
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.6.7 -> @
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.7.7 -> 4 (i32)
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.2.8 -> 10.0.0.0
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.3.8 -> 255.0.0.0
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.4.8 -> private
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.5.8 -> 3 (i32)
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.6.8 -> @
TLV-11[13]: 1.3.6.1.2.1.69.1.2.1.7.8 -> 4 (i32)
Time Of Day completed...
SB5101 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.112.81.46:225
13 TLV-11's OK.
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.
mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
/////////////////telnet log ends////////////////////